camerabin2 question

[Alexander Malaev]

Thanks for your answer! 
I thought If I add decoder element and link ghostpad to it, it will work, but it didn't =)
So I’ll take a first way.

The second way I think should be more complex than just tee, it would be great if camerabin in future could take any type of audio/video input on sink and record it to file/show viewfinder with determined codecs and container e.g:
rtmpsrc location=blablabla ! camerabin …
filesrc location=blablabla ! camerabin ...
etc.

But keep it simple :)

-- 
Alexander Malaev
Sent with Airmail

На 11 сентября 2014 г. в 19:01:37, Thiago Santos (thiagoss at osg.samsung.com) написал:

On 09/11/2014 11:51 AM, Alexander Malaev wrote:
I’m going another way and have another problem.

I removed source bin, added ghostpads audiosink and videosink to camerabin, linked ghostpads to passed camera-source avdec_h254 element and audio-source avdec_aac element. 

All pads were linked successfully but I could’t figure out why buffers were not going through these ghostpads to decoder elements.
In attachment my pipeline dump in png format.

That won't work. Just adding ghostpads to an element doesn't mean that it will know what to do with those pads. It was not programmed to do so. Just like your picture shows those pads are there unlinked internally to anything and will just drop all data and return errors (not-linked).

So, I see 2 ways you can solve your problem:

1) Use the appsink/appsrc pair as I suggested.

2) Reimplement part of camerabin yourself by adding a tee for your video and having one output into a video sink for displaying and putting the other one into the encoding part (using encodebin makes this easier). You should also link your audio to encodebin to get it to the output.


-- 
Alexander Malaev
Sent with Airmail

На 11 сентября 2014 г. в 18:23:23, Thiago Santos (thiagoss at osg.samsung.com) написал:

On 09/10/2014 09:24 AM, Alexander Malaev wrote:
Hi,

I'm using gstreamer 1.2.1 and Python GObject. I'm writing a recorder from rtmp stream using camerabin element. I set camera-source to rtmp source bin wrapped by wrappercamerabinsrc, but I can't set audio-source from the same bin. It writes me that source bin already has a parent. If I don't set an audio-source it uses autoaudiosrc, instead of audio from source bin.

Here is gist with my code: https://gist.github.com/spscream/4df7195a50b0e35ba63e

I think I should make a separate bins for audio and video source, but I can't actually figure it out. What is the best way to feed my rtmp source to camerabin?

Unfortunately camerabin doesn't support having the same element providing both video and audio. What I can suggest to do is to link your audio stream to an appsink and create an appsrc and use that as the audio source. When you get a buffer from appsink just push it into appsrc. Remember to set caps to appsrc and proper stream type so it behaves correctly for this scenario.



--
WBR
Alexander Malaev

  
 _______________________________________________
gstreamer-devel mailing list
gstreamer-devel at lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel



 --   
Thiago Sousa Santos
Senior Multimedia Engineer, Open Source Group
Samsung Research America - Silicon Valley

_______________________________________________
gstreamer-devel mailing list
gstreamer-devel at lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel


--  
Thiago Sousa Santos
Senior Multimedia Engineer, Open Source Group
Samsung Research America - Silicon Valley
_______________________________________________  
gstreamer-devel mailing list  
gstreamer-devel at lists.freedesktop.org  
http://lists.freedesktop.org/mailman/listinfo/gstreamer-devel  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/gstreamer-devel/attachments/20140911/f6fa2137/attachment.html>