PIP on the Raspberry Pi with Logitech C920

[bluedot951]

Sorry, looks like it lost my formatting. Here it is again with formatting
(hopefully)...

Hello, 

First time on these forums, so please excuse me if this is posted
incorrectly / in the wrong place. I am trying to use GStreamer to stream
video from multiple cameras (Logitech C920's) connected to a Raspberry Pi to
a Windows 8.1 computer. So far, I have been able to stream from a single
camera using the following commands: 

On the pi: gst-launch-1.0 v4l2src device=/dev/video0 !
video/x-h264,width=1280,height=720,framerate=30/1 ! h264parse ! rtph264pay
pt=127 config-interval=4 ! udpsink host=192.168.2.7 

On Windows: gst-launch-1.0 udpsrc ! application/x-rtp, payload=1 27 !
rtph264depay ! avdec_h264 ! fpsdisplaysink sync=false text-overlay=false 

I am following the instructions posted on this wiki post
(http://wiki.oz9aec.net/index.php/Gstreamer_cheat_sheet#Picture_in_Picture)
- I know that this is for GStreamer0.1, but it is the only source I could
find. The final solution does not have to use PIP - I just need to send
video from multiple cameras to Windows using only one port. This is because
there are network restrictions, and there is only one port that is
available. 

Any advice on how to do this using only one port would be very helpful.
Thanks in advance for your help! 

bluedot951




--
View this message in context: http://gstreamer-devel.966125.n4.nabble.com/PIP-on-the-Raspberry-Pi-with-Logitech-C920-tp4671155p4671156.html
Sent from the GStreamer-devel mailing list archive at Nabble.com.