Problems with mpegtsmux -> filesink always stopping immediately.

[wunwunforever]

I am working on an open source media server project that wraps gstreamer and
am trying to debug a pipeline that contains an rtp source and an mpegtsmux
and filesink. 

The full server boot logs are available here:

https://drive.google.com/file/d/0B9eZJKieRdJPeHVheEtyRmNUWlk/view?usp=sharing

The elements of interest are mpegtsmux2 and filesink2. The filesink creates
the file correctly but does not write anything to the file. I think the
issue is with the timestamps in the stream. Below are the log lines that
show the filesink stopping. Any guidance as to how to fix or get better
debugging info would be much appreciated. 

2016-06-23 06:03:35,500711 19233 [0x00007f3ef6ffd700]   debug GST_STATES               
gstelement.c:2561 gst_element_set_state_func() <filesink2>  current READY,
old_pending PAUSED, next PAUSED, old return ASYNC
2016-06-23 06:03:35,500787 19233 [0x00007f3ef6ffd700]   debug GST_STATES               
gstelement.c:2595 gst_element_set_state_func() <filesink2>  intermediate:
setting state from PAUSED to READY
2016-06-23 06:03:35,500879 19233 [0x00007f3ef6ffd700]     log GST_STATES               
gstelement.c:2850 gst_element_change_state_func() <filesink2>  default
handler tries setting state from PAUSED to READY (001a)
2016-06-23 06:03:35,500940 19233 [0x00007f3ef6ffd700]   debug
GST_ELEMENT_PADS          gstelement.c:2793 gst_element_pads_activate()
<filesink2>  deactivate pads
2016-06-23 06:03:35,500998 19233 [0x00007f3ef6ffd700]   debug GST_PADS                 
gstpad.c:1076 gst_pad_set_active() <filesink2:sink>  deactivating pad from
push mode
2016-06-23 06:03:35,501045 19233 [0x00007f3ef6ffd700]   debug GST_PADS                 
gstpad.c:965 pre_activate() <filesink2:sink>  setting PAD_MODE NONE, set
flushing
2016-06-23 06:03:35,501092 19233 [0x00007f3ef6ffd700]   debug basesink                 
gstbasesink.c:4144 gst_base_sink_set_flushing() <filesink2>  flushing out
data thread, need preroll to TRUE
2016-06-23 06:03:35,501135 19233 [0x00007f3ef6ffd700]   debug GST_PADS                 
gstpad.c:1013 post_activate() <filesink2:sink>  stopped streaming
2016-06-23 06:03:35,501179 19233 [0x00007f3ef6ffd700]   debug GST_PADS                 
gstpad.c:1186 activate_mode_internal() <filesink2:sink>  deactivated in push
mode
2016-06-23 06:03:35,501231 19233 [0x00007f3ef6ffd700]   debug
GST_ELEMENT_PADS          gstelement.c:2812 gst_element_pads_activate()
<filesink2>  pad deactivation successful
2016-06-23 06:03:35,501302 19233 [0x00007f3ef6ffd700]   debug basesink                 
gstbasesink.c:5205 gst_base_sink_change_state() <filesink2>  PAUSED to
READY, posting async-done
2016-06-23 06:03:35,501346 19233 [0x00007f3ef6ffd700]     log GST_MESSAGE              
gstmessage.c:292 gst_message_new_custom()  source filesink2: creating new
message 0x7f3f28050c00 state-changed
2016-06-23 06:03:35,501384 19233 [0x00007f3ef6ffd700]   debug GST_BUS                  
gstbus.c:309 gst_bus_post() <bus50>  [msg 0x7f3f28050c00] posting on bus
state-changed message: 0x7f3f28050c00, time 99:99:99.999999999, seq-num
44304, element 'filesink2', GstMessageStateChanged,
old-state=(GstState)GST_STATE_PLAYING, new-state=(GstState)GST_STATE_PAUSED,
pending-state=(GstState)GST_STATE_READY;




--
View this message in context: http://gstreamer-devel.966125.n4.nabble.com/Problems-with-mpegtsmux-filesink-always-stopping-immediately-tp4678214.html
Sent from the GStreamer-devel mailing list archive at Nabble.com.