Problems with mpegtsmux -> filesink always stopping immediately.

[Aaron Boxer]

Hi Michael,

May I ask what media server project you are working on ?

Thanks,
Aaron

On Thu, Jun 23, 2016 at 5:24 AM, wunwunforever <michael at spalk.co> wrote:

> I am working on an open source media server project that wraps gstreamer
> and
> am trying to debug a pipeline that contains an rtp source and an mpegtsmux
> and filesink.
>
> The full server boot logs are available here:
>
>
> https://drive.google.com/file/d/0B9eZJKieRdJPeHVheEtyRmNUWlk/view?usp=sharing
>
> The elements of interest are mpegtsmux2 and filesink2. The filesink creates
> the file correctly but does not write anything to the file. I think the
> issue is with the timestamps in the stream. Below are the log lines that
> show the filesink stopping. Any guidance as to how to fix or get better
> debugging info would be much appreciated.
>
> 2016-06-23 06:03:35,500711 19233 [0x00007f3ef6ffd700]   debug GST_STATES
> gstelement.c:2561 gst_element_set_state_func() <filesink2>  current READY,
> old_pending PAUSED, next PAUSED, old return ASYNC
> 2016-06-23 06:03:35,500787 19233 [0x00007f3ef6ffd700]   debug GST_STATES
> gstelement.c:2595 gst_element_set_state_func() <filesink2>  intermediate:
> setting state from PAUSED to READY
> 2016-06-23 06:03:35,500879 19233 [0x00007f3ef6ffd700]     log GST_STATES
> gstelement.c:2850 gst_element_change_state_func() <filesink2>  default
> handler tries setting state from PAUSED to READY (001a)
> 2016-06-23 06:03:35,500940 19233 [0x00007f3ef6ffd700]   debug
> GST_ELEMENT_PADS          gstelement.c:2793 gst_element_pads_activate()
> <filesink2>  deactivate pads
> 2016-06-23 06:03:35,500998 19233 [0x00007f3ef6ffd700]   debug GST_PADS
> gstpad.c:1076 gst_pad_set_active() <filesink2:sink>  deactivating pad from
> push mode
> 2016-06-23 06:03:35,501045 19233 [0x00007f3ef6ffd700]   debug GST_PADS
> gstpad.c:965 pre_activate() <filesink2:sink>  setting PAD_MODE NONE, set
> flushing
> 2016-06-23 06:03:35,501092 19233 [0x00007f3ef6ffd700]   debug basesink
> gstbasesink.c:4144 gst_base_sink_set_flushing() <filesink2>  flushing out
> data thread, need preroll to TRUE
> 2016-06-23 06:03:35,501135 19233 [0x00007f3ef6ffd700]   debug GST_PADS
> gstpad.c:1013 post_activate() <filesink2:sink>  stopped streaming
> 2016-06-23 06:03:35,501179 19233 [0x00007f3ef6ffd700]   debug GST_PADS
> gstpad.c:1186 activate_mode_internal() <filesink2:sink>  deactivated in
> push
> mode
> 2016-06-23 06:03:35,501231 19233 [0x00007f3ef6ffd700]   debug
> GST_ELEMENT_PADS          gstelement.c:2812 gst_element_pads_activate()
> <filesink2>  pad deactivation successful
> 2016-06-23 06:03:35,501302 19233 [0x00007f3ef6ffd700]   debug basesink
> gstbasesink.c:5205 gst_base_sink_change_state() <filesink2>  PAUSED to
> READY, posting async-done
> 2016-06-23 06:03:35,501346 19233 [0x00007f3ef6ffd700]     log GST_MESSAGE
> gstmessage.c:292 gst_message_new_custom()  source filesink2: creating new
> message 0x7f3f28050c00 state-changed
> 2016-06-23 06:03:35,501384 19233 [0x00007f3ef6ffd700]   debug GST_BUS
> gstbus.c:309 gst_bus_post() <bus50>  [msg 0x7f3f28050c00] posting on bus
> state-changed message: 0x7f3f28050c00, time 99:99:99.999999999, seq-num
> 44304, element 'filesink2', GstMessageStateChanged,
> old-state=(GstState)GST_STATE_PLAYING,
> new-state=(GstState)GST_STATE_PAUSED,
> pending-state=(GstState)GST_STATE_READY;
>
>
>
>
> --
> View this message in context:
> http://gstreamer-devel.966125.n4.nabble.com/Problems-with-mpegtsmux-filesink-always-stopping-immediately-tp4678214.html
> Sent from the GStreamer-devel mailing list archive at Nabble.com.
> _______________________________________________
> gstreamer-devel mailing list
> gstreamer-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/gstreamer-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/gstreamer-devel/attachments/20160623/69a47344/attachment.html>