Use RTP payload type in order to decode the RTP stream

[Paixao Julien]

Hi,

> -----Original Message-----
> From: gstreamer-devel [mailto:gstreamer-devel-bounces at lists.freedesktop.org] On Behalf Of Nicolas Dufresne
> Sent: Tuesday, May 03, 2016 6:11 PM
> To: Discussion of the development of and with GStreamer <gstreamer-devel at lists.freedesktop.org>
> Subject: Re: Use RTP payload type in order to decode the RTP stream
> 
> Le mardi 03 mai 2016 à 13:55 +0000, Paixao Julien a écrit :
> > Today I am using RTP in combination with SDP, which works, but I think
> > it would be nice to have a pipeline capable of decoding rtp stream
> > with known payload type without SDP needs:
> > e.g udpsrc multicast-group=<ip> port=<port> caps="application/x-
> > rtp,media=audio" ! decodebin ! autoaudiosink
> 
> Best would be to give it a try. What you'd need to implement is an RTP typefinder feature. That typefinder would do basic sanity check
> to make sure the GstBuffer is a rtp packet (rtp is not parsable, so the size of the GstBuffer must be exactly the RTP packet size). And
> then for payload type that are not dynamically allocated, it would create caps.
> It's a case by case thing though, as for certain types you may not able to provide all the required caps field. All the modern CODEC are
> exposed using dynamically allocated payload type, so it might not be widely useful.
> 

I am going to file feature request for it.

Best regards,
Julien.