GstProxy, compositor, and framerates...
Bill Hofmann
bill at theliquidview.com
Sun Oct 9 17:02:54 UTC 2022
One more piece of data, which I GUESS answers my question. This pipeline
shows the same (terrible) framerate, which suggests that this is a
compositor issue:
gst-launch-1.0 souphttpsrc name="pipe2" location="
http://127.0.0.1/1D2E355A-BD2C-4807-91EA-4C2236D2DBED/0/late.m3u8" !
parsebin name=pb ! vaapih265dec ! \
video/x-raw,format=P010_10LE ! compositor background=transparent ! queue !
fpsdisplaysink video-sink="kmssink connector-id=308 plane-id=31"
So - in the attempt to blend/dissolve two P010 streams, neither compositor
nor glshader will work? Compositor because of performance, glshader because
the format is not supported?
-Bill
On Fri, Oct 7, 2022 at 2:32 PM Bill Hofmann <bill at theliquidview.com> wrote:
> Folks:
>
> Running into a challenge perhaps the insight of the list would help. I'm
> using compositor, proxysrc and proxysink to mix two 4k h.265 10b streams
> together (and animating alpha to fade from one to the other).
>
> If I look at the framerate of each of the "source" pipelines using
> fpsdisplaysink inline, they're showing pretty darn close to the source
> framerate (29.97), but when I look at the output on the screen, the
> framerate is around 10fps (if I put fpsdisplaysink after the compositor).
>
> Note that when the alpha on one of two streams is 0, I
> set_state(Gst.State.PAUSED), so I'd think that decoder performance wouldn't
> constrain this in steady state, even if it does so during transitions.
>
> The pipeline with a single stream directly to kmssink runs at source
> framerate as well - *that's* fine.
>
> Is this a problem with compositor? A problem with queueing?
>
> Thoughts? What additional info would you need? This is using a slightly
> modified version of
> https://github.com/matthew1000/gstreamer-cheat-sheet/blob/master/python_examples/gstproxy_02_playbin.py,
> btw.
>
> -Bill
>
> Pipelines:
>
> PIPELINE1 = """
> souphttpsrc name="pipe1" location="
> http://127.0.0.1/1D2E355A-BD2C-4807-91EA-4C2236D2DBED/0/early.m3u8" !
> parsebin name=pb ! vaapih265dec !
> video/x-raw,format=P010_10LE ! proxysink name="video_sink"
> pb. ! queue ! fdkaacdec ! scaletempo ! volume volume=0.9 ! proxysink
> name="audio_sink"
> """
>
>
> PIPELINE2 = """
> souphttpsrc name="pipe2" location="
> http://127.0.0.1/1D2E355A-BD2C-4807-91EA-4C2236D2DBED/0/late.m3u8" !
> parsebin name=pb ! vaapih265dec !
> video/x-raw,format=P010_10LE ! proxysink name="video_sink"
> pb. ! queue ! fdkaacdec ! scaletempo ! volume volume=0.9 ! proxysink
> name="audio_sink"
> """
>
>
> PIPELINE3 = """
> proxysrc name=video_src_1 ! videomix.
> proxysrc name=audio_src_1 ! alsasink
> proxysrc name=video_src_2 ! videomix.
> proxysrc name=audio_src_2 ! alsasink
> compositor name=videomix background=transparent ! queue !
> kmssink connector-id=308 plane-id=31
> """
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/gstreamer-devel/attachments/20221009/ea5387f0/attachment.htm>
More information about the gstreamer-devel
mailing list