[igt-dev] [PATCH i-g-t] test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP
Petri Latvala
petri.latvala at intel.com
Fri Dec 21 12:14:49 UTC 2018
On Thu, Dec 20, 2018 at 11:10:46AM -0800, Anusha wrote:
> From: Manasi Navare <manasi.d.navare at intel.com>
>
> This patch adds a basic kms test to validate the display stream
> compression functionality if supported on DP/eDP connector.
> Currently this has only two subtests to force the DSC on all
> the eDP and DP connectors that support it with default parameters.
> This will be expanded to add more subtests to tweak DSC parameters.
>
> v7: (from Anusha)
> * Code Style changes.(Petri)
> * Use for_each_pipe() instead of for_each_pipe_static().(Petri)
> * Correct logic by avoiding skipping of inner for loop completely.(Petri)
> v6: (from Anusha)
> * Fix run_test() (Petri)
> * Fix update_display() to avoid leaks. (Petri)
> v5:
> * Fix test cleanup to avoid crash (Petri)
> v4:
> * Future proof for more test types (Petri)
> * Fix alphabetical order (Petri)
> * s/igt_display_init/igt_display_require (Petri)
> * Remove blank lines after return (Petri)
> v3:
> * Use array of connectors and loop through (Petri)
> * Also check for FEC on DP connectors (Manasi)
> * Add a Pipe_A restriction on DP (Ville)
> v2:
> * Use IGT wrappers for all (DK, Antonio)
> * Split into two subtests for eDP and DP types (Petri)
>
> Cc: Petri Latvala <petri.latvala at intel.com>
> Cc: Antonio Argenziano <antonio.argenziano at intel.com>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
> tests/Makefile.sources | 1 +
> tests/kms_dp_dsc.c | 266 +++++++++++++++++++++++++++++++++++++++++
> tests/meson.build | 1 +
> 3 files changed, 268 insertions(+)
> create mode 100644 tests/kms_dp_dsc.c
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index eedde1e8..a3c24c99 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -54,6 +54,7 @@ TESTS_progs = \
> kms_crtc_background_color \
> kms_cursor_crc \
> kms_cursor_legacy \
> + kms_dp_dsc \
> kms_draw_crc \
> kms_fbcon_fbt \
> kms_fence_pin_leak \
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> new file mode 100644
> index 00000000..c9a387ed
> --- /dev/null
> +++ b/tests/kms_dp_dsc.c
> @@ -0,0 +1,266 @@
> +/*
> + * Copyright © 2018 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + * Displayport Display Stream Compression test
> + * Until the CRC support is added this needs to be invoked with --interactive
> + * to manually verify if the test pattern is seen without corruption for each
> + * subtest.
> + *
> + * Authors:
> + * Manasi Navare <manasi.d.navare at intel.com>
> + *
> + */
> +#include "igt.h"
> +#include "igt_sysfs.h"
> +#include <errno.h>
> +#include <getopt.h>
> +#include <math.h>
> +#include <stdint.h>
> +#include <stdbool.h>
> +#include <strings.h>
> +#include <unistd.h>
> +#include <stdlib.h>
> +#include <signal.h>
> +#include <time.h>
> +#include <fcntl.h>
> +#include <termios.h>
> +
> +enum dsc_test_type
> +{
> + test_basic_dsc_enable
> +};
> +
> +typedef struct {
> + int drm_fd;
> + int debugfs_fd;
> + uint32_t id;
> + igt_display_t display;
> + struct igt_fb fb_test_pattern;
> + igt_output_t *output;
> + int mode_valid;
> + drmModeModeInfo *mode;
> + drmModeConnector *connector;
> + drmModeEncoder *encoder;
> + int crtc;
> + enum pipe pipe;
> + char conn_name[128];
> +} data_t;
> +
> +static inline void manual(const char *expected)
> +{
> + igt_debug_manual_check("all", expected);
> +}
> +
> +static bool is_dp_dsc_supported(data_t *data)
> +{
> + char file_name[128] = {0};
> + char buf[512];
> +
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_fec_support");
> + igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
> + sizeof(buf)) > 0);
> + igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> + return strstr(buf, "DSC_Sink_Support: yes");
> +}
> +
> +static bool is_dp_fec_supported(data_t *data)
> +{
> + char file_name[128] = {0};
> + char buf[512];
> +
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_fec_support");
> + igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> + return strstr(buf, "FEC_Sink_Support: yes");
> +}
> +
> +static bool is_dp_dsc_enabled(data_t *data)
> +{
> + char file_name[128] = {0};
> + char buf[512];
> +
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_fec_support");
> + igt_debugfs_read(data->drm_fd, file_name, buf);
> +
> + return strstr(buf, "DSC_Enabled: yes");
> +}
> +
> +static void force_dp_dsc_enable(data_t *data)
> +{
> + char file_name[128] = {0};
> + int ret;
> +
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_fec_support");
> + igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
> + ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
> + igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> +static void clear_dp_dsc_enable(data_t *data)
> +{
> + char file_name[128] = {0};
> + int ret;
> +
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_fec_support");
> + igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> + ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> + igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> +static void test_cleanup(data_t *data) {
> + igt_plane_t *primary;
> +
> + if (data->output) {
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + igt_display_commit(&data->display);
> +
> + igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> + }
> +}
> +
> +
> +/*
> + * Re-probe connectors and do a modeset with DSC
> + *
> + */
> +static void update_display(data_t *data, enum dsc_test_type test_type)
> +{
> + igt_plane_t *primary;
> + data->mode = igt_output_get_mode(data->output);
> + data->connector = data->output->config.connector;
> +
> + if (data->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> + data->pipe == PIPE_A) {
> + igt_debug ("DSC not supported on Pipe A on external DP\n");
> + return;
> + }
> +
> + if (test_type == test_basic_dsc_enable) {
> + igt_debug ("DSC is supported on %s\n",
> + data->conn_name);
> + force_dp_dsc_enable(data);
> + /* Clear the fb in order to avoid leaks */
> + igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> + igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> + data->mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_DRM_FORMAT_MOD_NONE,
> + &data->fb_test_pattern);
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, &data->fb_test_pattern);
> + igt_display_commit(&data->display);
> + /* Until we have CRC check support, manually check if RGB test pattern has no corruption */
> + manual ("RGB test pattern without corruption");
> + igt_assert_f(is_dp_dsc_enabled(data),
> + "Default DSC enable failed on Connector: %s Pipe: %s",
> + data->conn_name,
> + kmstest_pipe_name(data->pipe));
> + clear_dp_dsc_enable(data);
> + } else {
> + igt_assert(!"Unknown test type\n");
> + }
> +}
> +
> +static void run_test(data_t *data, igt_output_t *output,
> + enum dsc_test_type test_type)
> +{
> + enum pipe pipe;
> +
> + for_each_pipe(&data->display, pipe) {
> +
> + if (igt_pipe_connector_valid(pipe, output)) {
> + igt_output_set_pipe(output, pipe);
> + data->pipe = pipe;
> + data->output = output;
> + update_display(data, test_type);
> + }
> + }
> +}
> +
> +igt_main
> +{
> + data_t data = {};
> + igt_output_t *output;
> + drmModeRes *res;
> + drmModeConnector *connector;
> + int i, test_conn_cnt, test_cnt;
> + int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
> +
> + igt_fixture {
> + data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> + data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> + kmstest_set_vt_graphics_mode();
> + igt_display_require(&data.display, data.drm_fd);
> + //igt_display_require_output(&data.display);
> + igt_require(res = drmModeGetResources(data.drm_fd));
> + }
> +
> + for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
> +
> + igt_subtest_f("basic-dsc-enable-%s",
> + kmstest_connector_type_str(tests[test_cnt])) {
> + test_conn_cnt = 0;
> + for (i = 0; i < res->count_connectors; i++) {
> + connector = drmModeGetConnectorCurrent(data.drm_fd,
> + res->connectors[i]);
> + if (connector->connection != DRM_MODE_CONNECTED ||
> + connector->connector_type !=
> + tests[test_cnt])
> + continue;
> + test_conn_cnt++;
> + output = igt_output_from_connector(&data.display, connector);
> + sprintf(data.conn_name, "%s-%d",
> + kmstest_connector_type_str(connector->connector_type),
> + test_conn_cnt);
> + if(!is_dp_dsc_supported(&data))
> + igt_debug("DSC not supported on connector %s \n",
> + data.conn_name);
> + break;
This should rather be 'continue'.
> + if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
> + igt_require_f(is_dp_fec_supported(&data),
> + "DSC cannot be enabled without FEC on %s\n",
> + data.conn_name);
> + run_test(&data, output, test_basic_dsc_enable);
...and in fact, the test should check if it got into testing any
connectors. As in, actually ended up calling run_test().
> + }
> + test_cleanup(&data);
> + igt_skip_on(test_conn_cnt == 0);
And this skip_on is meant to check exactly that. The point of this is
to produce a SKIP result if no DP connectors were DSC capable.
Maybe increment test_conn_cnt instead right before calling run_test,
and use connector->connector_type_id instead of test_conn_cnt to
generate data.conn_name?
--
Petri Latvala
More information about the igt-dev
mailing list