[igt-dev] [PATCH i-g-t] test/kms_dp_dsc: Basic KMS test to validate VESA DSC on DP/eDP
Manasi Navare
manasi.d.navare at intel.com
Fri Dec 21 16:57:51 UTC 2018
On Fri, Dec 21, 2018 at 02:14:49PM +0200, Petri Latvala wrote:
> On Thu, Dec 20, 2018 at 11:10:46AM -0800, Anusha wrote:
> > From: Manasi Navare <manasi.d.navare at intel.com>
> >
> > This patch adds a basic kms test to validate the display stream
> > compression functionality if supported on DP/eDP connector.
> > Currently this has only two subtests to force the DSC on all
> > the eDP and DP connectors that support it with default parameters.
> > This will be expanded to add more subtests to tweak DSC parameters.
> >
> > v7: (from Anusha)
> > * Code Style changes.(Petri)
> > * Use for_each_pipe() instead of for_each_pipe_static().(Petri)
> > * Correct logic by avoiding skipping of inner for loop completely.(Petri)
> > v6: (from Anusha)
> > * Fix run_test() (Petri)
> > * Fix update_display() to avoid leaks. (Petri)
> > v5:
> > * Fix test cleanup to avoid crash (Petri)
> > v4:
> > * Future proof for more test types (Petri)
> > * Fix alphabetical order (Petri)
> > * s/igt_display_init/igt_display_require (Petri)
> > * Remove blank lines after return (Petri)
> > v3:
> > * Use array of connectors and loop through (Petri)
> > * Also check for FEC on DP connectors (Manasi)
> > * Add a Pipe_A restriction on DP (Ville)
> > v2:
> > * Use IGT wrappers for all (DK, Antonio)
> > * Split into two subtests for eDP and DP types (Petri)
> >
> > Cc: Petri Latvala <petri.latvala at intel.com>
> > Cc: Antonio Argenziano <antonio.argenziano at intel.com>
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> > tests/Makefile.sources | 1 +
> > tests/kms_dp_dsc.c | 266 +++++++++++++++++++++++++++++++++++++++++
> > tests/meson.build | 1 +
> > 3 files changed, 268 insertions(+)
> > create mode 100644 tests/kms_dp_dsc.c
> >
> > diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> > index eedde1e8..a3c24c99 100644
> > --- a/tests/Makefile.sources
> > +++ b/tests/Makefile.sources
> > @@ -54,6 +54,7 @@ TESTS_progs = \
> > kms_crtc_background_color \
> > kms_cursor_crc \
> > kms_cursor_legacy \
> > + kms_dp_dsc \
> > kms_draw_crc \
> > kms_fbcon_fbt \
> > kms_fence_pin_leak \
> > diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> > new file mode 100644
> > index 00000000..c9a387ed
> > --- /dev/null
> > +++ b/tests/kms_dp_dsc.c
> > @@ -0,0 +1,266 @@
> > +/*
> > + * Copyright © 2018 Intel Corporation
> > + *
> > + * Permission is hereby granted, free of charge, to any person obtaining a
> > + * copy of this software and associated documentation files (the "Software"),
> > + * to deal in the Software without restriction, including without limitation
> > + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > + * and/or sell copies of the Software, and to permit persons to whom the
> > + * Software is furnished to do so, subject to the following conditions:
> > + *
> > + * The above copyright notice and this permission notice (including the next
> > + * paragraph) shall be included in all copies or substantial portions of the
> > + * Software.
> > + *
> > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> > + * IN THE SOFTWARE.
> > + *
> > + * Displayport Display Stream Compression test
> > + * Until the CRC support is added this needs to be invoked with --interactive
> > + * to manually verify if the test pattern is seen without corruption for each
> > + * subtest.
> > + *
> > + * Authors:
> > + * Manasi Navare <manasi.d.navare at intel.com>
> > + *
> > + */
> > +#include "igt.h"
> > +#include "igt_sysfs.h"
> > +#include <errno.h>
> > +#include <getopt.h>
> > +#include <math.h>
> > +#include <stdint.h>
> > +#include <stdbool.h>
> > +#include <strings.h>
> > +#include <unistd.h>
> > +#include <stdlib.h>
> > +#include <signal.h>
> > +#include <time.h>
> > +#include <fcntl.h>
> > +#include <termios.h>
> > +
> > +enum dsc_test_type
> > +{
> > + test_basic_dsc_enable
> > +};
> > +
> > +typedef struct {
> > + int drm_fd;
> > + int debugfs_fd;
> > + uint32_t id;
> > + igt_display_t display;
> > + struct igt_fb fb_test_pattern;
> > + igt_output_t *output;
> > + int mode_valid;
> > + drmModeModeInfo *mode;
> > + drmModeConnector *connector;
> > + drmModeEncoder *encoder;
> > + int crtc;
> > + enum pipe pipe;
> > + char conn_name[128];
> > +} data_t;
> > +
> > +static inline void manual(const char *expected)
> > +{
> > + igt_debug_manual_check("all", expected);
> > +}
> > +
> > +static bool is_dp_dsc_supported(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + char buf[512];
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_require(igt_debugfs_simple_read(data->debugfs_fd, file_name, buf,
> > + sizeof(buf)) > 0);
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "DSC_Sink_Support: yes");
> > +}
> > +
> > +static bool is_dp_fec_supported(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + char buf[512];
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "FEC_Sink_Support: yes");
> > +}
> > +
> > +static bool is_dp_dsc_enabled(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + char buf[512];
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debugfs_read(data->drm_fd, file_name, buf);
> > +
> > + return strstr(buf, "DSC_Enabled: yes");
> > +}
> > +
> > +static void force_dp_dsc_enable(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + int ret;
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
> > + ret = igt_sysfs_write(data->debugfs_fd, file_name, "1", 1);
> > + igt_assert_f(ret > 0, "debugfs_write failed");
> > +}
> > +
> > +static void clear_dp_dsc_enable(data_t *data)
> > +{
> > + char file_name[128] = {0};
> > + int ret;
> > +
> > + strcpy(file_name, data->conn_name);
> > + strcat(file_name, "/i915_dsc_fec_support");
> > + igt_debug ("Clearing DSC enable on %s\n", data->conn_name);
> > + ret = igt_sysfs_write(data->debugfs_fd, file_name, "0", 1);
> > + igt_assert_f(ret > 0, "debugfs_write failed");
> > +}
> > +
> > +static void test_cleanup(data_t *data) {
> > + igt_plane_t *primary;
> > +
> > + if (data->output) {
> > + primary = igt_output_get_plane_type(data->output,
> > + DRM_PLANE_TYPE_PRIMARY);
> > + igt_plane_set_fb(primary, NULL);
> > + igt_display_commit(&data->display);
> > +
> > + igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> > + }
> > +}
> > +
> > +
> > +/*
> > + * Re-probe connectors and do a modeset with DSC
> > + *
> > + */
> > +static void update_display(data_t *data, enum dsc_test_type test_type)
> > +{
> > + igt_plane_t *primary;
> > + data->mode = igt_output_get_mode(data->output);
> > + data->connector = data->output->config.connector;
> > +
> > + if (data->connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> > + data->pipe == PIPE_A) {
> > + igt_debug ("DSC not supported on Pipe A on external DP\n");
> > + return;
> > + }
> > +
> > + if (test_type == test_basic_dsc_enable) {
> > + igt_debug ("DSC is supported on %s\n",
> > + data->conn_name);
> > + force_dp_dsc_enable(data);
> > + /* Clear the fb in order to avoid leaks */
> > + igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> > + igt_create_pattern_fb(data->drm_fd, data->mode->hdisplay,
> > + data->mode->vdisplay,
> > + DRM_FORMAT_XRGB8888,
> > + LOCAL_DRM_FORMAT_MOD_NONE,
> > + &data->fb_test_pattern);
> > + primary = igt_output_get_plane_type(data->output,
> > + DRM_PLANE_TYPE_PRIMARY);
> > + igt_plane_set_fb(primary, &data->fb_test_pattern);
> > + igt_display_commit(&data->display);
> > + /* Until we have CRC check support, manually check if RGB test pattern has no corruption */
> > + manual ("RGB test pattern without corruption");
> > + igt_assert_f(is_dp_dsc_enabled(data),
> > + "Default DSC enable failed on Connector: %s Pipe: %s",
> > + data->conn_name,
> > + kmstest_pipe_name(data->pipe));
> > + clear_dp_dsc_enable(data);
> > + } else {
> > + igt_assert(!"Unknown test type\n");
> > + }
> > +}
> > +
> > +static void run_test(data_t *data, igt_output_t *output,
> > + enum dsc_test_type test_type)
> > +{
> > + enum pipe pipe;
> > +
> > + for_each_pipe(&data->display, pipe) {
> > +
> > + if (igt_pipe_connector_valid(pipe, output)) {
> > + igt_output_set_pipe(output, pipe);
> > + data->pipe = pipe;
> > + data->output = output;
> > + update_display(data, test_type);
> > + }
> > + }
> > +}
> > +
> > +igt_main
> > +{
> > + data_t data = {};
> > + igt_output_t *output;
> > + drmModeRes *res;
> > + drmModeConnector *connector;
> > + int i, test_conn_cnt, test_cnt;
> > + int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
> > +
> > + igt_fixture {
> > + data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> > + data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> > + kmstest_set_vt_graphics_mode();
> > + igt_display_require(&data.display, data.drm_fd);
> > + //igt_display_require_output(&data.display);
> > + igt_require(res = drmModeGetResources(data.drm_fd));
> > + }
> > +
> > + for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
> > +
> > + igt_subtest_f("basic-dsc-enable-%s",
> > + kmstest_connector_type_str(tests[test_cnt])) {
> > + test_conn_cnt = 0;
> > + for (i = 0; i < res->count_connectors; i++) {
> > + connector = drmModeGetConnectorCurrent(data.drm_fd,
> > + res->connectors[i]);
> > + if (connector->connection != DRM_MODE_CONNECTED ||
> > + connector->connector_type !=
> > + tests[test_cnt])
> > + continue;
> > + test_conn_cnt++;
> > + output = igt_output_from_connector(&data.display, connector);
> > + sprintf(data.conn_name, "%s-%d",
> > + kmstest_connector_type_str(connector->connector_type),
> > + test_conn_cnt);
> > + if(!is_dp_dsc_supported(&data))
> > + igt_debug("DSC not supported on connector %s \n",
> > + data.conn_name);
> > + break;
>
>
> This should rather be 'continue'.
Yes definitely, this should be continue so that it can still go ahead and test other connectors.
I thought Anusha tested this, sorry about that.
I will fix this in my next spin and thanks again for being so patient with the reviews.
>
>
> > + if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
> > + igt_require_f(is_dp_fec_supported(&data),
> > + "DSC cannot be enabled without FEC on %s\n",
> > + data.conn_name);
This will need to be changed to if (!is_dp_fec_supported()) continue;
as well
> > + run_test(&data, output, test_basic_dsc_enable);
>
>
> ...and in fact, the test should check if it got into testing any
> connectors. As in, actually ended up calling run_test().
>
>
>
> > + }
> > + test_cleanup(&data);
> > + igt_skip_on(test_conn_cnt == 0);
Yes I had added the igt_skip_on based on your previous comment to make sure the test is skipped if no connectors are found
and it does not give a false positive pass for the test.
SO this should still be good right?
Anusha, I will respin this version and send it out.
Regards
Manasi
>
> And this skip_on is meant to check exactly that. The point of this is
> to produce a SKIP result if no DP connectors were DSC capable.
>
> Maybe increment test_conn_cnt instead right before calling run_test,
> and use connector->connector_type_id instead of test_conn_cnt to
> generate data.conn_name?
>
>
> --
> Petri Latvala
More information about the igt-dev
mailing list