[igt-dev] [PATCH i-g-t] tests/kms_plane_multiple: before going testing check how many planes are allowed

[Lisovskiy, Stanislav]

On Fri, 2019-04-05 at 17:55 +0300, Juha-Pekka Heikkila wrote:


With current failures we need this fixed.

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>

> before start testing try out how many planes kernel will
> allow simultaneously to be used.
> 
> v2 (Jose Souza, Daniel Vetter): Fix resource leaks. Randomize
> used planes.
> 
> Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
> ---
>  tests/kms_plane_multiple.c | 88
> +++++++++++++++++++++++++++++++++++++---------
>  1 file changed, 71 insertions(+), 17 deletions(-)
> 
> diff --git a/tests/kms_plane_multiple.c b/tests/kms_plane_multiple.c
> index bfaeede..f2707dc 100644
> --- a/tests/kms_plane_multiple.c
> +++ b/tests/kms_plane_multiple.c
> @@ -80,16 +80,6 @@ static void test_fini(data_t *data, igt_output_t
> *output, int n_planes)
>  {
>  	igt_pipe_crc_stop(data->pipe_crc);
>  
> -	for (int i = 0; i < n_planes; i++) {
> -		igt_plane_t *plane = data->plane[i];
> -		if (!plane)
> -			continue;
> -		if (plane->type == DRM_PLANE_TYPE_PRIMARY)
> -			continue;
> -		igt_plane_set_fb(plane, NULL);
> -		data->plane[i] = NULL;
> -	}
> -
>  	/* reset the constraint on the pipe */
>  	igt_output_set_pipe(output, PIPE_ANY);
>  
> @@ -99,7 +89,8 @@ static void test_fini(data_t *data, igt_output_t
> *output, int n_planes)
>  	free(data->plane);
>  	data->plane = NULL;
>  
> -	igt_remove_fb(data->drm_fd, data->fb);
> +	free(data->fb);
> +	data->fb = NULL;
>  
>  	igt_display_reset(&data->display);
>  }
> @@ -195,6 +186,7 @@ prepare_planes(data_t *data, enum pipe pipe_id,
> color_t *color,
>  	int *y;
>  	int *size;
>  	int i;
> +	int* suffle;
>  
>  	igt_output_set_pipe(output, pipe_id);
>  	primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> @@ -206,6 +198,34 @@ prepare_planes(data_t *data, enum pipe pipe_id,
> color_t *color,
>  	igt_assert_f(y, "Failed to allocate %ld bytes for variable
> y\n", (long int) (pipe->n_planes * sizeof(*y)));
>  	size = malloc(pipe->n_planes * sizeof(*size));
>  	igt_assert_f(size, "Failed to allocate %ld bytes for variable
> size\n", (long int) (pipe->n_planes * sizeof(*size)));
> +	suffle = malloc(pipe->n_planes * sizeof(*suffle));
> +	igt_assert_f(suffle, "Failed to allocate %ld bytes for variable
> size\n", (long int) (pipe->n_planes * sizeof(*suffle)));
> +
> +	for (i = 0; i < pipe->n_planes; i++)
> +		suffle[i] = i;
> +
> +	/*
> +	 * suffle table for planes. using rand() should keep it
> +	 * 'randomized in expected way'
> +	 */
> +	for (i = 0; i < 256; i++) {
> +		int n, m;
> +		int a, b;
> +
> +		n = rand() % (pipe->n_planes-1);
> +		m = rand() % (pipe->n_planes-1);
> +
> +		/*
> +		 * keep primary plane at its place for test's sake.
> +		 */
> +		if(n == primary->index || m == primary->index)
> +			continue;
> +
> +		a = suffle[n];
> +		b = suffle[m];
> +		suffle[n] = b;
> +		suffle[m] = a;
> +	}
>  
>  	mode = igt_output_get_mode(output);
>  
> @@ -213,7 +233,11 @@ prepare_planes(data_t *data, enum pipe pipe_id,
> color_t *color,
>  	x[primary->index] = 0;
>  	y[primary->index] = 0;
>  	for (i = 0; i < max_planes; i++) {
> -		igt_plane_t *plane = igt_output_get_plane(output, i);
> +		/*
> +		 * Here is made assumption primary plane will have
> +		 * index zero.
> +		 */
> +		igt_plane_t *plane = igt_output_get_plane(output,
> suffle[i]);
>  		uint32_t plane_format;
>  		uint64_t plane_tiling;
>  
> @@ -251,6 +275,10 @@ prepare_planes(data_t *data, enum pipe pipe_id,
> color_t *color,
>  	create_fb_for_mode_position(data, output, mode, color, x, y,
>  				    size, size, tiling, max_planes);
>  	igt_plane_set_fb(data->plane[primary->index], &data-
> >fb[primary->index]);
> +	free((void*)x);
> +	free((void*)y);
> +	free((void*)size);
> +	free((void*)suffle);
>  }
>  
>  static void
> @@ -260,7 +288,9 @@ test_plane_position_with_output(data_t *data,
> enum pipe pipe,
>  {
>  	color_t blue  = { 0.0f, 0.0f, 1.0f };
>  	igt_crc_t crc;
> +	igt_plane_t *plane;
>  	int i;
> +	int err, c = 0;
>  	int iterations = opt.iterations < 1 ? 1 : opt.iterations;
>  	bool loop_forever;
>  	char info[256];
> @@ -274,22 +304,46 @@ test_plane_position_with_output(data_t *data,
> enum pipe pipe,
>  			iterations, iterations > 1 ? "iterations" :
> "iteration");
>  	}
>  
> -	igt_info("Testing connector %s using pipe %s with %d planes %s
> with seed %d\n",
> -		 igt_output_name(output), kmstest_pipe_name(pipe),
> n_planes,
> -		 info, opt.seed);
> -
>  	test_init(data, pipe, n_planes);
>  
>  	test_grab_crc(data, output, pipe, &blue, tiling);
>  
> +	/*
> +	 * Find out how many planes are allowed simultaneously
> +	 */
> +	do {
> +		c++;
> +		prepare_planes(data, pipe, &blue, tiling, c, output);
> +		err = igt_display_try_commit2(&data->display,
> COMMIT_ATOMIC);
> +
> +		for_each_plane_on_pipe(&data->display, pipe, plane)
> +			igt_plane_set_fb(plane, NULL);
> +
> +		for (int x = 0; x < c; x++)
> +			igt_remove_fb(data->drm_fd, &data->fb[x]);
> +	} while (!err && c < n_planes);
> +
> +	if(err)
> +		c--;
> +
> +	igt_info("Testing connector %s using pipe %s with %d planes %s
> with seed %d\n",
> +		 igt_output_name(output), kmstest_pipe_name(pipe), c,
> +		 info, opt.seed);
> +
>  	i = 0;
>  	while (i < iterations || loop_forever) {
> -		prepare_planes(data, pipe, &blue, tiling, n_planes,
> output);
> +		prepare_planes(data, pipe, &blue, tiling, c, output);
>  
>  		igt_display_commit2(&data->display, COMMIT_ATOMIC);
>  
>  		igt_pipe_crc_get_current(data->display.drm_fd, data-
> >pipe_crc, &crc);
>  
> +		for_each_plane_on_pipe(&data->display, pipe, plane)
> +			igt_plane_set_fb(plane, NULL);
> +
> +		for (int x = 0; x < c; x++)
> +			igt_remove_fb(data->drm_fd, &data->fb[x]);
> +
>  		igt_assert_crc_equal(&data->ref_crc, &crc);
>  
>  		i++;