[igt-dev] [Intel-gfx] [PATCH i-g-t] intel_gpu_top: Wrap interactive header

[Tvrtko Ursulin]

On 03/02/2021 11:00, Chris Wilson wrote:
> Quoting Tvrtko Ursulin (2021-02-03 10:31:04)
>>
>> On 01/02/2021 12:07, Chris Wilson wrote:
>>> Quoting Tvrtko Ursulin (2021-02-01 11:57:56)
>>>> From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>>>>
>>>> Slight improvement with regards to wrapping header components to fit
>>>> console width. If a single element is wider than max it can still
>>>> overflow but it should now work better for practical console widths.
>>>
>>> <----
>>> intel-gpu-top: Intel Kabylake (Gen9) @ /dev/dri/card0
>>>    900/ 949 MHz;   0% RC6;  6.97/18.42 W;        2 irqs/s
>>>         IMC reads:        6 MiB/s
>>>        IMC writes:        0 MiB/s
>>>
>>> ---->
>>> intel-gpu-top: Intel Kabylake (Gen9) @ /dev/dri/card0 -  903/ 954 MHz;   0% RC6
>>>       7.16/18.40 W;       14 irqs/s
>>>
>>>         IMC reads:       80 MiB/s
>>>        IMC writes:        0 MiB/s
>>>
>>> I thought it looked reasonably tidy, without adding any lines to the
>>> header.
>>
>> Or on a wider terminal:
>> <----
>> intel-gpu-top: Intel Skylake (Gen9) @ /dev/dri/card0
>>      0/   0 MHz; 100% RC6;  0.00/ 1.29 W;        0 irqs/s
>>         IMC reads:      138 MiB/s
>>        IMC writes:        6 MiB/s
>> --->
>> intel-gpu-top: Intel Skylake (Gen9) @ /dev/dri/card0 -    0/   0 MHz; 100% RC6;  0.00/ 0.00 W;        0 irqs/s
>>
>>         IMC reads:       77 MiB/s
>>        IMC writes:        4 MiB/s
>>
>>
>> So a "fight" between 80 chars vs 120 (or so). :) It may be a bit of an over-engineered solution but I don't like the wrap on a wide terminal, plus I like an extra blank line.
> 
> But the memory counters are visually similar to the
> frequency/rc6/power/interrupts...

But I broke my layout by accident when rebasing client stats... ;D

Regards,

Tvrtko