[igt-dev] [PATCH i-g-t 3/3] Revert "tests/kms_invalid_mode: Test Cleanup"
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Oct 7 16:04:43 UTC 2022
On Fri, Oct 07, 2022 at 09:19:58PM +0530, Modem, Bhanuprakash wrote:
> On Fri-07-10-2022 07:10 pm, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > This reverts commit 6725767a84109e934ca138d94df0482386c44532.
> >
> > This was no cleanup. It does fifteen different things and
> > in the process flat out breaks the test at least on all
> > non-atomic drivers/platforms.
>
> will it be useful [1]?
>
> [1]: https://patchwork.freedesktop.org/series/109484/
Useful to specify a framebuffer? Sure. Will if fix the
thing? No.
>
> - Bhanu
>
> >
> > Cc: Nidhi Gupta <nidhi1.gupta at intel.com>
> > Cc: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > tests/kms_invalid_mode.c | 39 ++++++++++++++++++++++++---------------
> > 1 file changed, 24 insertions(+), 15 deletions(-)
> >
> > diff --git a/tests/kms_invalid_mode.c b/tests/kms_invalid_mode.c
> > index 21ee91abf54b..0287ee02c1c4 100644
> > --- a/tests/kms_invalid_mode.c
> > +++ b/tests/kms_invalid_mode.c
> > @@ -35,6 +35,7 @@ struct _data {
> > enum pipe pipe;
> > igt_display_t display;
> > igt_output_t *output;
> > + drmModeResPtr res;
> > int max_dotclock;
> > bool (*adjust_mode)(data_t *data, drmModeModeInfoPtr mode);
> > };
> > @@ -181,29 +182,35 @@ static void
> > test_output(data_t *data)
> > {
> > igt_output_t *output = data->output;
> > + drmModeModeInfo mode;
> > struct igt_fb fb;
> > int ret;
> > - drmModeModeInfo *mode;
> > + uint32_t crtc_id;
> >
> > - igt_output_set_pipe(output, data->pipe);
> > + /*
> > + * FIXME test every mode we have to be more
> > + * sure everything is really getting rejected?
> > + */
> > + mode = *igt_output_get_mode(output);
> > + igt_require(data->adjust_mode(data, &mode));
> >
> > - igt_create_fb(data->drm_fd, 512, 512, DRM_FORMAT_XRGB8888,
> > + igt_create_fb(data->drm_fd,
> > + max_t(uint16_t, mode.hdisplay, 64),
> > + max_t(uint16_t, mode.vdisplay, 64),
> > + DRM_FORMAT_XRGB8888,
> > DRM_FORMAT_MOD_LINEAR,
> > &fb);
> >
> > - for_each_connector_mode(output) {
> > - mode = &output->config.connector->modes[j__];
> > - igt_require(data->adjust_mode(data, mode));
> > - igt_output_override_mode(output, mode);
> > - ret = igt_display_try_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> > - igt_assert(ret == -EINVAL);
> > - }
> > + kmstest_unset_all_crtcs(data->drm_fd, data->res);
> > +
> > + crtc_id = data->display.pipes[data->pipe].crtc_id;
> > +
> > + ret = drmModeSetCrtc(data->drm_fd, crtc_id,
> > + fb.fb_id, 0, 0,
> > + &output->id, 1, &mode);
> > + igt_assert_lt(ret, 0);
> >
> > igt_remove_fb(data->drm_fd, &fb);
> > - igt_output_override_mode(output, NULL);
> > - /*unset_all_crtcs*/
> > - igt_display_reset(&data->display);
> > - igt_display_commit(&data->display);
> > }
> >
> > static int i915_max_dotclock(data_t *data)
> > @@ -283,10 +290,11 @@ igt_main
> > kmstest_set_vt_graphics_mode();
> >
> > igt_display_require(&data.display, data.drm_fd);
> > + data.res = drmModeGetResources(data.drm_fd);
> > + igt_assert(data.res);
> >
> > data.max_dotclock = i915_max_dotclock(&data);
> > igt_info("Max dotclock: %d kHz\n", data.max_dotclock);
> > - igt_display_require_output(&data.display);
> > }
> >
> > igt_describe("Make sure all modesets are rejected when the requested mode is invalid");
> > @@ -306,5 +314,6 @@ igt_main
> > igt_fixture {
> > igt_display_fini(&data.display);
> > igt_reset_connectors();
> > + drmModeFreeResources(data.res);
> > }
> > }
--
Ville Syrjälä
Intel
More information about the igt-dev
mailing list