[igt-dev] [PATCH i-g-t 3/3] Revert "tests/kms_invalid_mode: Test Cleanup"

Ville Syrjälä ville.syrjala at linux.intel.com
Thu Oct 27 20:18:03 UTC 2022


On Fri, Oct 07, 2022 at 04:40:29PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> This reverts commit 6725767a84109e934ca138d94df0482386c44532.
> 
> This was no cleanup. It does fifteen different things and
> in the process flat out breaks the test at least on all
> non-atomic drivers/platforms.
> 
> Cc: Nidhi Gupta <nidhi1.gupta at intel.com>
> Cc: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Is anyone going to do anything about this or do I just push the
reverts?

> ---
>  tests/kms_invalid_mode.c | 39 ++++++++++++++++++++++++---------------
>  1 file changed, 24 insertions(+), 15 deletions(-)
> 
> diff --git a/tests/kms_invalid_mode.c b/tests/kms_invalid_mode.c
> index 21ee91abf54b..0287ee02c1c4 100644
> --- a/tests/kms_invalid_mode.c
> +++ b/tests/kms_invalid_mode.c
> @@ -35,6 +35,7 @@ struct _data {
>  	enum pipe pipe;
>  	igt_display_t display;
>  	igt_output_t *output;
> +	drmModeResPtr res;
>  	int max_dotclock;
>  	bool (*adjust_mode)(data_t *data, drmModeModeInfoPtr mode);
>  };
> @@ -181,29 +182,35 @@ static void
>  test_output(data_t *data)
>  {
>  	igt_output_t *output = data->output;
> +	drmModeModeInfo mode;
>  	struct igt_fb fb;
>  	int ret;
> -	drmModeModeInfo *mode;
> +	uint32_t crtc_id;
>  
> -	igt_output_set_pipe(output, data->pipe);
> +	/*
> +	 * FIXME test every mode we have to be more
> +	 * sure everything is really getting rejected?
> +	 */
> +	mode = *igt_output_get_mode(output);
> +	igt_require(data->adjust_mode(data, &mode));
>  
> -	igt_create_fb(data->drm_fd, 512, 512, DRM_FORMAT_XRGB8888,
> +	igt_create_fb(data->drm_fd,
> +		      max_t(uint16_t, mode.hdisplay, 64),
> +		      max_t(uint16_t, mode.vdisplay, 64),
> +		      DRM_FORMAT_XRGB8888,
>  		      DRM_FORMAT_MOD_LINEAR,
>  		      &fb);
>  
> -	for_each_connector_mode(output) {
> -		mode = &output->config.connector->modes[j__];
> -		igt_require(data->adjust_mode(data, mode));
> -		igt_output_override_mode(output, mode);
> -		ret = igt_display_try_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> -		igt_assert(ret == -EINVAL);
> -	}
> +	kmstest_unset_all_crtcs(data->drm_fd, data->res);
> +
> +	crtc_id = data->display.pipes[data->pipe].crtc_id;
> +
> +	ret = drmModeSetCrtc(data->drm_fd, crtc_id,
> +			     fb.fb_id, 0, 0,
> +			     &output->id, 1, &mode);
> +	igt_assert_lt(ret, 0);
>  
>  	igt_remove_fb(data->drm_fd, &fb);
> -	igt_output_override_mode(output, NULL);
> -	/*unset_all_crtcs*/
> -	igt_display_reset(&data->display);
> -	igt_display_commit(&data->display);
>  }
>  
>  static int i915_max_dotclock(data_t *data)
> @@ -283,10 +290,11 @@ igt_main
>  		kmstest_set_vt_graphics_mode();
>  
>  		igt_display_require(&data.display, data.drm_fd);
> +		data.res = drmModeGetResources(data.drm_fd);
> +		igt_assert(data.res);
>  
>  		data.max_dotclock = i915_max_dotclock(&data);
>  		igt_info("Max dotclock: %d kHz\n", data.max_dotclock);
> -		igt_display_require_output(&data.display);
>  	}
>  
>  	igt_describe("Make sure all modesets are rejected when the requested mode is invalid");
> @@ -306,5 +314,6 @@ igt_main
>  	igt_fixture {
>  		igt_display_fini(&data.display);
>  		igt_reset_connectors();
> +		drmModeFreeResources(data.res);
>  	}
>  }
> -- 
> 2.35.1

-- 
Ville Syrjälä
Intel


More information about the igt-dev mailing list