[igt-dev] [v2 4/6] tests/kms_atomic: convert subtests to dynamic subtests
Swati Sharma
swati2.sharma at intel.com
Tue Oct 10 05:59:38 UTC 2023
Subtests are converted to dynamic subtests. From the fixture
for_each_pipe_with_valid_output() is removed and put at
subtest level to give flexibility to user to test all pipes/output
combinations. However, restricted to 1pipe/1output combination
as originally written in the test. Code rework is done to
accommodate above changes.
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/kms_atomic.c | 907 +++++++++++++++++++++++----------------------
1 file changed, 467 insertions(+), 440 deletions(-)
diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
index c55cb5b2f..e9159ded2 100644
--- a/tests/kms_atomic.c
+++ b/tests/kms_atomic.c
@@ -58,6 +58,15 @@
IGT_TEST_DESCRIPTION("Test atomic modesetting API");
+/* Common test data. */
+typedef struct {
+ igt_display_t display;
+ igt_plane_t *primary;
+ igt_pipe_t *pipe;
+ int drm_fd;
+ igt_fb_t fb;
+} data_t;
+
enum kms_atomic_check_relax {
ATOMIC_RELAX_NONE = 0,
CRTC_RELAX_MODE = (1 << 0),
@@ -301,8 +310,7 @@ static uint32_t plane_get_igt_format(igt_plane_t *plane)
* Test category: functionality test
*/
static void
-plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
- igt_plane_t *primary, igt_plane_t *overlay,
+plane_primary_overlay_mutable_zpos(data_t *data, igt_output_t *output, igt_plane_t *overlay,
uint32_t format_primary, uint32_t format_overlay)
{
struct igt_fb fb_primary, fb_overlay;
@@ -317,17 +325,17 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
uint32_t w_overlay = mode->hdisplay / 2;
uint32_t h_overlay = mode->vdisplay / 2;
- igt_create_color_pattern_fb(pipe->display->drm_fd,
+ igt_create_color_pattern_fb(data->drm_fd,
w, h, format_primary, DRM_FORMAT_MOD_LINEAR,
0.2, 0.2, 0.2, &fb_primary);
- igt_create_color_pattern_fb(pipe->display->drm_fd,
+ igt_create_color_pattern_fb(data->drm_fd,
w_overlay, h_overlay,
format_overlay, DRM_FORMAT_MOD_LINEAR,
0.2, 0.2, 0.2, &fb_overlay);
/* Draw a hole in the overlay */
- cr = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_overlay);
+ cr = igt_get_cairo_ctx(data->drm_fd, &fb_overlay);
cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
igt_paint_color_alpha(cr, w_overlay / 4, h_overlay / 4,
w_overlay / 2, h_overlay / 2,
@@ -335,33 +343,33 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
cairo_set_operator(cr, CAIRO_OPERATOR_OVER);
igt_put_cairo_ctx(cr);
- igt_plane_set_fb(primary, &fb_primary);
+ igt_plane_set_fb(data->primary, &fb_primary);
igt_plane_set_fb(overlay, &fb_overlay);
igt_plane_set_position(overlay, w_overlay / 2, h_overlay / 2);
- igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 0);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_ZPOS, 0);
igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
igt_info("Committing with overlay on top, it has a hole "\
"through which the primary should be seen\n");
- plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 0);
+ igt_assert_eq_u64(igt_plane_get_prop(data->primary, IGT_PLANE_ZPOS), 0);
igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
- igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 1);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_ZPOS, 1);
igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 0);
igt_info("Committing with primary on top, only the primary "\
"should be visible\n");
- plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 1);
+ igt_assert_eq_u64(igt_plane_get_prop(data->primary, IGT_PLANE_ZPOS), 1);
igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 0);
/* Draw a hole in the primary exactly on top of the overlay plane */
- cr = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_primary);
+ cr = igt_get_cairo_ctx(data->drm_fd, &fb_primary);
cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
igt_paint_color_alpha(cr, w_overlay / 2, h_overlay / 2,
w_overlay, h_overlay,
@@ -371,14 +379,14 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
igt_info("Committing with a hole in the primary through "\
"which the underlay should be seen\n");
- plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* reset it back to initial state */
- igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 0);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_ZPOS, 0);
igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
- plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 0);
+ igt_assert_eq_u64(igt_plane_get_prop(data->primary, IGT_PLANE_ZPOS), 0);
igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
}
@@ -392,8 +400,7 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
* Test category: functionality test
*/
static void
-plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
- igt_output_t *output, igt_plane_t *primary, int n_planes)
+plane_immutable_zpos(data_t *data, igt_output_t *output, enum pipe pipe, int n_planes)
{
cairo_t *cr;
struct igt_fb fb_ref;
@@ -406,8 +413,7 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
uint32_t w_lower, h_lower, w_upper, h_upper;
memset(plane_ptr, 0, n_planes * sizeof(igt_plane_t *));
-
- igt_require_pipe_crc(display->drm_fd);
+ igt_require_pipe_crc(data->drm_fd);
mode = igt_output_get_mode(output);
@@ -419,36 +425,36 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
w_upper = 64;
h_upper = 64;
- igt_create_color_fb(display->drm_fd,
+ igt_create_color_fb(data->drm_fd,
w_lower, h_lower,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR,
0.0, 0.0, 0.0, &fb_ref);
/* create reference image */
- cr = igt_get_cairo_ctx(display->drm_fd, &fb_ref);
+ cr = igt_get_cairo_ctx(data->drm_fd, &fb_ref);
igt_assert(cairo_status(cr) == 0);
igt_paint_color(cr, 0, 0, w_lower, h_lower, 0.0, 0.0, 1.0);
igt_paint_color(cr, w_upper / 2, h_upper / 2, w_upper, h_upper, 1.0, 1.0, 0.0);
igt_put_cairo_ctx(cr);
- igt_plane_set_fb(primary, &fb_ref);
- igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_plane_set_fb(data->primary, &fb_ref);
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
/* create the pipe_crc object for this pipe */
- pipe_crc = igt_pipe_crc_new(pipe->display->drm_fd, pipe->pipe,
+ pipe_crc = igt_pipe_crc_new(data->drm_fd, pipe,
IGT_PIPE_CRC_SOURCE_AUTO);
/* get reference crc */
igt_pipe_crc_start(pipe_crc);
- igt_pipe_crc_get_current(display->drm_fd, pipe_crc, &ref_crc);
+ igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
- igt_plane_set_fb(primary, NULL);
+ igt_plane_set_fb(data->primary, NULL);
for (int k = 0; k < n_planes; k++) {
int zpos;
igt_plane_t *temp;
- temp = &display->pipes[pipe->pipe].planes[k];
+ temp = &data->display.pipes[pipe].planes[k];
if (!igt_plane_has_prop(temp, IGT_PLANE_ZPOS))
continue;
@@ -458,14 +464,14 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
plane_ptr[zpos] = temp;
}
- fb_id_lower = igt_create_color_fb(display->drm_fd,
+ fb_id_lower = igt_create_color_fb(data->drm_fd,
w_lower, h_lower,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR,
0.0, 0.0, 1.0, &fb_lower);
igt_assert(fb_id_lower);
- fb_id_upper = igt_create_color_fb(display->drm_fd,
+ fb_id_upper = igt_create_color_fb(data->drm_fd,
w_upper, h_upper,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_MOD_LINEAR,
@@ -508,8 +514,8 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
igt_info("Committing with the plane[%d] underneath "\
"plane[%d]\n", i, (i + 1));
- igt_display_commit2(display, COMMIT_ATOMIC);
- igt_pipe_crc_get_current(pipe->display->drm_fd, pipe_crc, &new_crc);
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+ igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &new_crc);
igt_assert_crc_equal(&ref_crc, &new_crc);
@@ -517,9 +523,9 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
igt_plane_set_fb(plane_upper, NULL);
}
- igt_remove_fb(display->drm_fd, &fb_ref);
- igt_remove_fb(display->drm_fd, &fb_lower);
- igt_remove_fb(display->drm_fd, &fb_upper);
+ igt_remove_fb(data->drm_fd, &fb_ref);
+ igt_remove_fb(data->drm_fd, &fb_lower);
+ igt_remove_fb(data->drm_fd, &fb_upper);
}
/**
@@ -537,17 +543,15 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
* @overlay: Overlay plane
* @primary: Primary plane
*/
-static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *plane)
+static void plane_overlay(data_t *data, igt_output_t *output, igt_plane_t *plane,
+ uint32_t format)
{
- drmModeModeInfo *mode = igt_output_get_mode(output);
- uint32_t format = plane_get_igt_format(plane);
struct igt_fb fb;
+ drmModeModeInfo *mode = igt_output_get_mode(output);
uint32_t w = mode->hdisplay / 2;
uint32_t h = mode->vdisplay / 2;
- igt_require(format != 0);
-
- igt_create_pattern_fb(pipe->display->drm_fd, w, h,
+ igt_create_pattern_fb(data->drm_fd, w, h,
format, DRM_FORMAT_MOD_LINEAR, &fb);
igt_plane_set_fb(plane, &fb);
@@ -580,49 +584,49 @@ static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *p
igt_plane_set_position(plane, 0, 0);
plane_commit(plane, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
- igt_remove_fb(pipe->display->drm_fd, &fb);
+ igt_remove_fb(data->drm_fd, &fb);
}
-static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *fb)
+static void plane_primary(data_t *data)
{
struct igt_fb fb2;
- igt_create_color_pattern_fb(pipe->display->drm_fd,
- fb->width, fb->height,
- fb->drm_format, DRM_FORMAT_MOD_LINEAR,
+ igt_create_color_pattern_fb(data->drm_fd,
+ data->fb.width, data->fb.height,
+ data->fb.drm_format, I915_TILING_NONE,
0.2, 0.2, 0.2, &fb2);
/*
* Flip the primary plane using the atomic API, and double-check
* state is what we think it should be.
*/
- igt_plane_set_fb(plane, &fb2);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &fb2);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* Restore the primary plane and check the state matches the old. */
- igt_plane_set_fb(plane, fb);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Set the plane through the legacy CRTC/primary-plane API, and
* verify through atomic.
*/
- igt_plane_set_fb(plane, &fb2);
- crtc_commit(pipe, plane, COMMIT_LEGACY, CRTC_RELAX_MODE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Restore the plane to its original settings through the legacy CRTC
* API, and verify through atomic.
*/
- igt_plane_set_fb(plane, fb);
- crtc_commit(pipe, plane, COMMIT_LEGACY, CRTC_RELAX_MODE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ crtc_commit(data->pipe, data->primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
/*
* Set the plane through the universal setplane API, and
* verify through atomic.
*/
- igt_plane_set_fb(plane, &fb2);
- plane_commit(plane, COMMIT_UNIVERSAL, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &fb2);
+ plane_commit(data->primary, COMMIT_UNIVERSAL, ATOMIC_RELAX_NONE);
}
/**
@@ -639,61 +643,58 @@ static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *f
* Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches the
* free-standing state objects and nothing else.
*/
-static void test_only(igt_pipe_t *pipe_obj, igt_plane_t *primary,
- igt_output_t *output, uint32_t format)
+static void test_only(data_t *data, igt_output_t *output, enum pipe pipe, uint32_t format)
{
- drmModeModeInfo *mode = igt_output_get_mode(output);
struct igt_fb fb;
uint64_t old_plane_values[IGT_NUM_PLANE_PROPS], old_crtc_values[IGT_NUM_CRTC_PROPS];
+ drmModeModeInfo *mode = igt_output_get_mode(output);
- plane_get_current_state(primary, old_plane_values);
- crtc_get_current_state(pipe_obj, old_crtc_values);
+ plane_get_current_state(data->primary, old_plane_values);
+ crtc_get_current_state(data->pipe, old_crtc_values);
igt_assert(!old_crtc_values[IGT_CRTC_MODE_ID]);
- igt_create_pattern_fb(pipe_obj->display->drm_fd,
- mode->hdisplay, mode->vdisplay,
- format, DRM_FORMAT_MOD_LINEAR, &fb);
- igt_plane_set_fb(primary, &fb);
- igt_output_set_pipe(output, pipe_obj->pipe);
+ igt_create_pattern_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ format, I915_TILING_NONE, &fb);
+ igt_plane_set_fb(data->primary, &fb);
+ igt_output_set_pipe(output, pipe);
- igt_display_commit_atomic(pipe_obj->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ igt_display_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
/* check the state, should still be old state */
- crtc_check_current_state(pipe_obj, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
- plane_check_current_state(primary, old_plane_values, ATOMIC_RELAX_NONE);
+ crtc_check_current_state(data->pipe, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
+ plane_check_current_state(data->primary, old_plane_values, ATOMIC_RELAX_NONE);
/*
* Enable the plane through the legacy CRTC/primary-plane API, and
* verify through atomic.
*/
- crtc_commit(pipe_obj, primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
+ crtc_commit(data->pipe, data->primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
/* Same for disable.. */
- plane_get_current_state(primary, old_plane_values);
- crtc_get_current_state(pipe_obj, old_crtc_values);
+ plane_get_current_state(data->primary, old_plane_values);
+ crtc_get_current_state(data->pipe, old_crtc_values);
- igt_plane_set_fb(primary, NULL);
+ igt_plane_set_fb(data->primary, NULL);
igt_output_set_pipe(output, PIPE_NONE);
- igt_display_commit_atomic(pipe_obj->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ igt_display_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
/* for extra stress, go through dpms off/on cycle */
kmstest_set_connector_dpms(output->display->drm_fd, output->config.connector, DRM_MODE_DPMS_OFF);
kmstest_set_connector_dpms(output->display->drm_fd, output->config.connector, DRM_MODE_DPMS_ON);
/* check the state, should still be old state */
- crtc_check_current_state(pipe_obj, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
- plane_check_current_state(primary, old_plane_values, ATOMIC_RELAX_NONE);
+ crtc_check_current_state(data->pipe, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
+ plane_check_current_state(data->primary, old_plane_values, ATOMIC_RELAX_NONE);
/* And disable the pipe and remove fb, test complete */
- crtc_commit(pipe_obj, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- igt_remove_fb(pipe_obj->display->drm_fd, &fb);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_remove_fb(data->drm_fd, &fb);
}
-static void plane_cursor(igt_pipe_t *pipe_obj,
- igt_output_t *output,
- igt_plane_t *cursor)
+static void plane_cursor(data_t *data, igt_output_t *output, igt_plane_t *cursor)
{
drmModeModeInfo *mode = igt_output_get_mode(output);
struct igt_fb fb;
@@ -702,12 +703,12 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
int y = mode->vdisplay / 2;
/* Any kernel new enough for atomic, also has the cursor size caps. */
- do_or_die(drmGetCap(pipe_obj->display->drm_fd,
+ do_or_die(drmGetCap(data->drm_fd,
DRM_CAP_CURSOR_WIDTH, &width));
- do_or_die(drmGetCap(pipe_obj->display->drm_fd,
+ do_or_die(drmGetCap(data->drm_fd,
DRM_CAP_CURSOR_HEIGHT, &height));
- igt_create_color_fb(pipe_obj->display->drm_fd,
+ igt_create_color_fb(data->drm_fd,
width, height, DRM_FORMAT_ARGB8888,
DRM_FORMAT_MOD_LINEAR,
0.0, 0.0, 0.0, &fb);
@@ -759,69 +760,64 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
* @params: plane parameters
* @params-fence: plane fence parameters
*/
-static void plane_invalid_params(igt_pipe_t *pipe,
- igt_output_t *output,
- igt_plane_t *plane,
- struct igt_fb *fb)
+static void plane_invalid_params(data_t *data, igt_output_t *output)
{
struct igt_fb fb2;
/* Pass a series of invalid object IDs for the FB ID. */
- igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, plane->drm_plane->plane_id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, data->primary->drm_plane->plane_id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, pipe->crtc_id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, data->pipe->crtc_id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, output->id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, output->id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, pipe->values[IGT_CRTC_MODE_ID]);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, data->pipe->values[IGT_CRTC_MODE_ID]);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
/* Valid, but invalid because CRTC_ID is set. */
- igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, 0);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, 0);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_fb(plane, fb);
- plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* Pass a series of invalid object IDs for the CRTC ID. */
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, plane->drm_plane->plane_id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->primary->drm_plane->plane_id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, fb->fb_id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->fb.fb_id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, output->id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, output->id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, pipe->values[IGT_CRTC_MODE_ID]);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->pipe->values[IGT_CRTC_MODE_ID]);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
/* Valid, but invalid because FB_ID is set. */
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, 0);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, 0);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_plane_set_fb(plane, fb);
- plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* Create a framebuffer too small for the plane configuration. */
- igt_create_pattern_fb(pipe->display->drm_fd,
- fb->width - 1, fb->height - 1,
- fb->drm_format, DRM_FORMAT_MOD_LINEAR, &fb2);
+ igt_create_pattern_fb(data->drm_fd,
+ data->fb.width - 1, data->fb.height - 1,
+ data->fb.drm_format, I915_TILING_NONE, &fb2);
- igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, fb2.fb_id);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, ENOSPC);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, fb2.fb_id);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, ENOSPC);
/* Restore the primary plane and check the state matches the old. */
- igt_plane_set_fb(plane, fb);
- plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
}
-static void plane_invalid_params_fence(igt_pipe_t *pipe,
- igt_output_t *output,
- igt_plane_t *plane)
+static void plane_invalid_params_fence(data_t *data, igt_output_t *output)
{
int timeline, fence_fd;
@@ -830,19 +826,19 @@ static void plane_invalid_params_fence(igt_pipe_t *pipe,
timeline = sw_sync_timeline_create();
/* invalid fence fd */
- igt_plane_set_fence_fd(plane, pipe->display->drm_fd);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_fence_fd(data->primary, data->drm_fd);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
/* Valid fence_fd but invalid CRTC */
fence_fd = sw_sync_timeline_create_fence(timeline, 1);
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, ~0);
- igt_plane_set_fence_fd(plane, fence_fd);
- plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, ~0);
+ igt_plane_set_fence_fd(data->primary, fence_fd);
+ plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
sw_sync_timeline_inc(timeline, 1);
- igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, pipe->crtc_id);
- plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->pipe->crtc_id);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
close(fence_fd);
close(timeline);
@@ -861,62 +857,55 @@ static void plane_invalid_params_fence(igt_pipe_t *pipe,
* @params: crtc parameters
* @params-fence: crtc fence parameters
*/
-static void crtc_invalid_params(igt_pipe_t *pipe,
- igt_output_t *output,
- igt_plane_t *plane,
- struct igt_fb *fb)
+static void crtc_invalid_params(data_t *data, igt_output_t *output)
{
- uint64_t old_mode_id = pipe->values[IGT_CRTC_MODE_ID];
+ uint64_t old_mode_id = data->pipe->values[IGT_CRTC_MODE_ID];
drmModeModeInfo *mode = igt_output_get_mode(output);
/* Pass a series of invalid object IDs for the mode ID. */
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, plane->drm_plane->plane_id);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->primary->drm_plane->plane_id);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, pipe->crtc_id);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->pipe->crtc_id);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, output->id);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->fb.fb_id);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, fb->fb_id);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, old_mode_id);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY, ATOMIC_RELAX_NONE, 0);
/* Can we restore mode? */
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, old_mode_id);
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY, ATOMIC_RELAX_NONE, 0);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, old_mode_id);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY, ATOMIC_RELAX_NONE, 0);
/*
* TEST_ONLY cannot be combined with DRM_MODE_PAGE_FLIP_EVENT,
* but DRM_MODE_PAGE_FLIP_EVENT will always generate EINVAL
* without valid crtc, so test it here.
*/
- crtc_commit_atomic_flags_err(pipe, plane,
+ crtc_commit_atomic_flags_err(data->pipe, data->primary,
DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
/* Create a blob which is the wrong size to be a valid mode. */
- igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) - 1);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
-
- igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) + 1);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
+ igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) - 1);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
+ igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) + 1);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
/* Restore the CRTC and check the state matches the old. */
- igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode));
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode));
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
}
-static void crtc_invalid_params_fence(igt_pipe_t *pipe,
- igt_output_t *output,
- igt_plane_t *plane,
- struct igt_fb *fb)
+static void crtc_invalid_params_fence(data_t *data, igt_output_t *output)
{
int timeline, fence_fd;
void *map;
const ptrdiff_t PAGE_SIZE = sysconf(_SC_PAGE_SIZE);
- uint64_t old_mode_id = pipe->values[IGT_CRTC_MODE_ID];
+ uint64_t old_mode_id = data->pipe->values[IGT_CRTC_MODE_ID];
igt_require_sw_sync();
@@ -926,86 +915,86 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
map = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
igt_assert(map != MAP_FAILED);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EFAULT);
munmap(map, PAGE_SIZE);
/* invalid out_fence_ptr */
map = mmap(NULL, PAGE_SIZE, PROT_EXEC, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
igt_assert(map != MAP_FAILED);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EFAULT);
munmap(map, PAGE_SIZE);
/* invalid out_fence_ptr */
map = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
igt_assert(map != MAP_FAILED);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
- crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
+ crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EFAULT);
munmap(map, PAGE_SIZE);
/* valid in fence but not allowed prop on crtc */
fence_fd = sw_sync_timeline_create_fence(timeline, 1);
- igt_plane_set_fence_fd(plane, fence_fd);
+ igt_plane_set_fence_fd(data->primary, fence_fd);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_ACTIVE, 0);
- igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_ACTIVE, 0);
+ igt_pipe_obj_clear_prop_changed(data->pipe, IGT_CRTC_OUT_FENCE_PTR);
- crtc_commit_atomic_flags_err(pipe, plane, 0, ATOMIC_RELAX_NONE, EINVAL);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, 0, ATOMIC_RELAX_NONE, EINVAL);
/* valid out fence ptr and flip event but not allowed prop on crtc */
- igt_pipe_request_out_fence(pipe);
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
+ igt_pipe_request_out_fence(data->pipe);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
/* valid flip event but not allowed prop on crtc */
- igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
+ igt_pipe_request_out_fence(data->pipe);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_ACTIVE, 1);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_ACTIVE, 1);
/* Configuration should be valid again */
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY,
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY,
ATOMIC_RELAX_NONE, 0);
/* Set invalid prop */
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, fb->fb_id);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->fb.fb_id);
/* valid out fence but invalid prop on crtc */
- igt_pipe_request_out_fence(pipe);
- crtc_commit_atomic_flags_err(pipe, plane, 0,
+ igt_pipe_request_out_fence(data->pipe);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, 0,
ATOMIC_RELAX_NONE, EINVAL);
/* valid out fence ptr and flip event but invalid prop on crtc */
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
/* valid page flip event but invalid prop on crtc */
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
/* successful TEST_ONLY with fences set */
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, old_mode_id);
- crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY,
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, old_mode_id);
+ crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY,
ATOMIC_RELAX_NONE, 0);
- igt_assert(pipe->out_fence_fd == -1);
+ igt_assert(data->pipe->out_fence_fd == -1);
close(fence_fd);
close(timeline);
/* reset fences */
- igt_plane_set_fence_fd(plane, -1);
- igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, 0);
- igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fence_fd(data->primary, -1);
+ igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, 0);
+ igt_pipe_obj_clear_prop_changed(data->pipe, IGT_CRTC_OUT_FENCE_PTR);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* out fence ptr but not page flip event */
- igt_pipe_request_out_fence(pipe);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_pipe_request_out_fence(data->pipe);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- igt_assert(pipe->out_fence_fd != -1);
+ igt_assert(data->pipe->out_fence_fd != -1);
}
/**
@@ -1023,12 +1012,8 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
* Abuse the atomic ioctl directly in order to test various invalid conditions,
* which the libdrm wrapper won't allow us to create.
*/
-static void atomic_invalid_params(igt_pipe_t *pipe,
- igt_plane_t *plane,
- igt_output_t *output,
- struct igt_fb *fb)
+static void atomic_invalid_params(data_t *data, igt_output_t *output)
{
- igt_display_t *display = pipe->display;
struct drm_mode_atomic ioc;
uint32_t obj_raw[16]; /* array of objects (sized by count_objs) */
uint32_t num_props_raw[16]; /* array of num props per obj (ditto) */
@@ -1039,7 +1024,7 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
memset(&ioc, 0, sizeof(ioc));
/* An empty request should do nothing. */
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
obj_raw[i] = 0;
@@ -1056,109 +1041,109 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
ioc.prop_values_ptr = (uintptr_t) values_raw;
/* Valid pointers, but still should copy nothing. */
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Valid noop, but with event set should fail. */
ioc.flags = DRM_MODE_PAGE_FLIP_EVENT;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
/* Nonsense flags. */
ioc.flags = 0xdeadbeef;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
ioc.flags = 0;
/* Safety check that flags is reset properly. */
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Reserved/MBZ. */
ioc.reserved = 1;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
ioc.reserved = 0;
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Zero is not a valid object ID. */
ioc.count_objs = ARRAY_SIZE(obj_raw);
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
/* Invalid object type (not a thing we can set properties on). */
ioc.count_objs = 1;
- obj_raw[0] = pipe->values[IGT_CRTC_MODE_ID];
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- obj_raw[0] = fb->fb_id;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ obj_raw[0] = data->pipe->values[IGT_CRTC_MODE_ID];
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ obj_raw[0] = data->fb.fb_id;
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
/* Filled object but with no properties; no-op. */
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
- obj_raw[i] = pipe->crtc_id;
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ obj_raw[i] = data->pipe->crtc_id;
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Pass in all sorts of things other than the property ID. */
num_props_raw[0] = 1;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- props_raw[0] = pipe->crtc_id;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- props_raw[0] = plane->drm_plane->plane_id;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ props_raw[0] = data->pipe->crtc_id;
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ props_raw[0] = data->primary->drm_plane->plane_id;
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
props_raw[0] = output->id;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- props_raw[0] = pipe->values[IGT_CRTC_MODE_ID];
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ props_raw[0] = data->pipe->values[IGT_CRTC_MODE_ID];
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
/* Valid property, valid value. */
for (i = 0; i < ARRAY_SIZE(props_raw); i++) {
- props_raw[i] = pipe->props[IGT_CRTC_MODE_ID];
- values_raw[i] = pipe->values[IGT_CRTC_MODE_ID];
+ props_raw[i] = data->pipe->props[IGT_CRTC_MODE_ID];
+ values_raw[i] = data->pipe->values[IGT_CRTC_MODE_ID];
}
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Setting the same thing multiple times is OK. */
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
num_props_raw[i] = ARRAY_SIZE(props_raw) / ARRAY_SIZE(obj_raw);
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
ioc.count_objs = ARRAY_SIZE(obj_raw);
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Pass a series of outlandish addresses. */
ioc.objs_ptr = 0;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
ioc.objs_ptr = (uintptr_t) obj_raw;
ioc.count_props_ptr = 0;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
ioc.count_props_ptr = (uintptr_t) num_props_raw;
ioc.props_ptr = 0;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
ioc.props_ptr = (uintptr_t) props_raw;
ioc.prop_values_ptr = 0;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
ioc.prop_values_ptr = (uintptr_t) values_raw;
- do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
+ do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
/* Attempt to overflow and/or trip various boundary conditions. */
ioc.count_objs = UINT32_MAX / sizeof(uint32_t);
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
ioc.count_objs = ARRAY_SIZE(obj_raw);
ioc.objs_ptr = UINT64_MAX - sizeof(uint32_t);
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
ioc.count_objs = 1;
ioc.objs_ptr = UINT64_MAX - sizeof(uint32_t);
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
num_props_raw[0] = UINT32_MAX / sizeof(uint32_t);
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
num_props_raw[0] = UINT32_MAX - 1;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
num_props_raw[i] = (UINT32_MAX / ARRAY_SIZE(obj_raw)) + 1;
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
num_props_raw[i] = ARRAY_SIZE(props_raw) / ARRAY_SIZE(obj_raw);
- do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
+ do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
}
/**
@@ -1169,27 +1154,27 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
* Mega feature: General Display Features
* Test category: functionality test
*/
-static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *fb)
+static void atomic_plane_damage(data_t *data)
{
struct drm_mode_rect damage[2];
struct igt_fb fb_1, fb_2;
cairo_t *cr_1, *cr_2;
/* Color fb with white rect at center */
- igt_create_color_fb(pipe->display->drm_fd, fb->width, fb->height,
- fb->drm_format, DRM_FORMAT_MOD_LINEAR, 0.2, 0.2, 0.2,
+ igt_create_color_fb(data->drm_fd, data->fb.width, data->fb.height,
+ data->fb.drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
&fb_1);
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
- igt_paint_color(cr_1, fb->width/4, fb->height/4, fb->width/2,
- fb->height/2, 1.0, 1.0, 1.0);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
+ igt_paint_color(cr_1, data->fb.width/4, data->fb.height/4, data->fb.width/2,
+ data->fb.height/2, 1.0, 1.0, 1.0);
igt_put_cairo_ctx(cr_1);
/*
* Flip the primary plane to new color fb using atomic API and check the
* state.
*/
- igt_plane_set_fb(plane, &fb_1);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &fb_1);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Change the color of top left clip from center and issue plane update
@@ -1197,35 +1182,35 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
*/
damage[0].x1 = 0;
damage[0].y1 = 0;
- damage[0].x2 = fb->width/2;
- damage[0].y2 = fb->height/2;
+ damage[0].x2 = data->fb.width/2;
+ damage[0].y2 = data->fb.height/2;
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
damage_rect_width(&damage[0]),
damage_rect_height(&damage[0]), 1.0, 0, 0);
igt_put_cairo_ctx(cr_1);
- igt_plane_set_fb(plane, &fb_1);
- igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
+ igt_plane_set_fb(data->primary, &fb_1);
+ igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
sizeof(*damage));
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Change the color of top left and bottom right clip from center and
* issue plane update with damage and verify the state.
*/
- igt_create_color_fb(pipe->display->drm_fd, fb->width, fb->height,
- fb->drm_format, DRM_FORMAT_MOD_LINEAR, 0.2, 0.2, 0.2,
+ igt_create_color_fb(data->drm_fd, data->fb.width, data->fb.height,
+ data->fb.drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
&fb_2);
- damage[0].x1 = fb->width/2;
+ damage[0].x1 = data->fb.width/2;
damage[0].y1 = 0;
- damage[0].x2 = fb->width;
- damage[0].y2 = fb->height/2;
+ damage[0].x2 = data->fb.width;
+ damage[0].y2 = data->fb.height/2;
- cr_2 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_2);
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
+ cr_2 = igt_get_cairo_ctx(data->drm_fd, &fb_2);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
cairo_set_source_surface(cr_2, fb_1.cairo_surface, 0, 0);
cairo_paint(cr_2);
igt_paint_color(cr_2, damage[0].x1, damage[0].y1,
@@ -1233,10 +1218,10 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
damage_rect_height(&damage[0]), 0, 1.0, 0);
igt_put_cairo_ctx(cr_1);
igt_put_cairo_ctx(cr_2);
- igt_plane_set_fb(plane, &fb_2);
- igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
+ igt_plane_set_fb(data->primary, &fb_2);
+ igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
sizeof(*damage));
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Issue plane update with damage with a clip outside of plane src.
@@ -1244,18 +1229,18 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
* will see no change on the screen.
*/
/* Resize fb_1 to be bigger than plane */
- igt_remove_fb(pipe->display->drm_fd, &fb_1);
- igt_create_color_fb(pipe->display->drm_fd, fb->width * 2, fb->height,
- fb->drm_format, DRM_FORMAT_MOD_LINEAR, 0.2, 0.2, 0.2,
+ igt_remove_fb(data->drm_fd, &fb_1);
+ igt_create_color_fb(data->drm_fd, data->fb.width * 2, data->fb.height,
+ data->fb.drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
&fb_1);
- damage[0].x1 = fb->width;
+ damage[0].x1 = data->fb.width;
damage[0].y1 = 0;
- damage[0].x2 = fb->width + fb->width/2;
- damage[0].y2 = fb->height/2;
+ damage[0].x2 = data->fb.width + data->fb.width/2;
+ damage[0].y2 = data->fb.height/2;
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
- cr_2 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_2);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
+ cr_2 = igt_get_cairo_ctx(data->drm_fd, &fb_2);
cairo_set_source_surface(cr_1, fb_2.cairo_surface, 0, 0);
cairo_paint(cr_1);
igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
@@ -1263,13 +1248,13 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
damage_rect_height(&damage[0]), 0, 1.0, 0);
igt_put_cairo_ctx(cr_2);
igt_put_cairo_ctx(cr_1);
- igt_plane_set_fb(plane, &fb_1);
- igt_plane_set_size(plane, fb->width, fb->height);
- igt_fb_set_position(&fb_1, plane, 0, 0);
- igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
- igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
+ igt_plane_set_fb(data->primary, &fb_1);
+ igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
+ igt_fb_set_position(&fb_1, data->primary, 0, 0);
+ igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
+ igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
sizeof(*damage));
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Issue a plane update with damage with a clip that overlap with plane
@@ -1277,23 +1262,23 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
* NOTE: Here drm core should take care of intersecting the clip to
* plane src.
*/
- damage[0].x1 = fb->width/2;
+ damage[0].x1 = data->fb.width/2;
damage[0].y1 = 0;
- damage[0].x2 = fb->width/2 + fb->width;
- damage[0].y2 = fb->height/2;
+ damage[0].x2 = data->fb.width/2 + data->fb.width;
+ damage[0].y2 = data->fb.height/2;
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
damage_rect_width(&damage[0]),
damage_rect_height(&damage[0]), 1.0, 1.0, 0);
igt_put_cairo_ctx(cr_1);
- igt_plane_set_fb(plane, &fb_1);
- igt_plane_set_size(plane, fb->width, fb->height);
- igt_fb_set_position(&fb_1, plane, 0, 0);
- igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
- igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
+ igt_plane_set_fb(data->primary, &fb_1);
+ igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
+ igt_fb_set_position(&fb_1, data->primary, 0, 0);
+ igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
+ igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
sizeof(*damage));
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Issue a plane update with damage with two clips one inside plane src
@@ -1301,16 +1286,16 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
* NOTE: This will result in plane update with clip inside plane src.
*/
damage[0].x1 = 0;
- damage[0].y1 = fb->height/2;
- damage[0].x2 = fb->width/2;
- damage[0].y2 = fb->height;
+ damage[0].y1 = data->fb.height/2;
+ damage[0].x2 = data->fb.width/2;
+ damage[0].y2 = data->fb.height;
- damage[1].x1 = fb->width + fb->width/2;
- damage[1].y1 = fb->height/2;
- damage[1].x2 = fb->width * 2;
- damage[1].y2 = fb->height;
+ damage[1].x1 = data->fb.width + data->fb.width/2;
+ damage[1].y1 = data->fb.height/2;
+ damage[1].x2 = data->fb.width * 2;
+ damage[1].y2 = data->fb.height;
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
damage_rect_width(&damage[0]),
damage_rect_height(&damage[0]), 0, 1.0, 1.0);
@@ -1318,13 +1303,13 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
damage_rect_width(&damage[1]),
damage_rect_height(&damage[1]), 0, 1.0, 0);
igt_put_cairo_ctx(cr_1);
- igt_plane_set_fb(plane, &fb_1);
- igt_plane_set_size(plane, fb->width, fb->height);
- igt_fb_set_position(&fb_1, plane, 0, 0);
- igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
- igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
+ igt_plane_set_fb(data->primary, &fb_1);
+ igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
+ igt_fb_set_position(&fb_1, data->primary, 0, 0);
+ igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
+ igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
sizeof(*damage) * 2);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/*
* Issue a plane update with overlapping damage clips. White rect in
@@ -1335,15 +1320,15 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
*/
damage[0].x1 = 0;
damage[0].y1 = 0;
- damage[0].x2 = fb->width/2;
- damage[0].y2 = fb->height/2;
+ damage[0].x2 = data->fb.width/2;
+ damage[0].y2 = data->fb.height/2;
- damage[1].x1 = fb->width/4;
- damage[1].y1 = fb->height/4;
- damage[1].x2 = fb->width/4 + fb->width/2;
- damage[1].y2 = fb->height/4 + fb->height/2;
+ damage[1].x1 = data->fb.width/4;
+ damage[1].y1 = data->fb.height/4;
+ damage[1].x2 = data->fb.width/4 + data->fb.width/2;
+ damage[1].y2 = data->fb.height/4 + data->fb.height/2;
- cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
+ cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
damage_rect_width(&damage[0]),
damage_rect_height(&damage[0]), 1.0, 0, 0);
@@ -1351,224 +1336,266 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
damage_rect_width(&damage[1]),
damage_rect_height(&damage[1]), 1.0, 1.0, 1.0);
igt_put_cairo_ctx(cr_1);
- igt_plane_set_fb(plane, &fb_1);
- igt_plane_set_size(plane, fb->width, fb->height);
- igt_fb_set_position(&fb_1, plane, 0, 0);
- igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
- igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
+ igt_plane_set_fb(data->primary, &fb_1);
+ igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
+ igt_fb_set_position(&fb_1, data->primary, 0, 0);
+ igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
+ igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
sizeof(*damage) * 2);
- crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* Restore the primary plane */
- igt_plane_set_fb(plane, fb);
- plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_plane_set_fb(data->primary, &data->fb);
+ plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
/* Remove the fb created for this test */
- igt_remove_fb(pipe->display->drm_fd, &fb_1);
- igt_remove_fb(pipe->display->drm_fd, &fb_2);
+ igt_remove_fb(data->drm_fd, &fb_1);
+ igt_remove_fb(data->drm_fd, &fb_2);
}
-static void atomic_setup(igt_display_t *display, enum pipe pipe, igt_output_t *output, igt_plane_t *primary, struct igt_fb *fb)
+static void atomic_setup(data_t *data, enum pipe pipe, igt_output_t *output)
{
- igt_info("Using (pipe %s + %s) to run the subtest.\n",
- kmstest_pipe_name(pipe), igt_output_name(output));
-
- igt_display_reset(display);
+ drmModeModeInfo *mode;
+ igt_display_reset(&data->display);
igt_output_set_pipe(output, pipe);
- igt_plane_set_fb(primary, fb);
- crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ data->primary = igt_pipe_get_plane_type(&data->display.pipes[pipe], DRM_PLANE_TYPE_PRIMARY);
+ data->pipe = &data->display.pipes[pipe];
+ mode = igt_output_get_mode(output);
+
+ igt_create_pattern_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ plane_get_igt_format(data->primary),
+ DRM_FORMAT_MOD_LINEAR, &data->fb);
+
+ igt_plane_set_fb(data->primary, &data->fb);
+
+ crtc_commit(data->primary->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
}
-static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *primary,
- igt_output_t *output, struct igt_fb *fb)
+static void atomic_clear(data_t *data, enum pipe pipe, igt_output_t *output)
{
igt_plane_t *plane;
- for_each_plane_on_pipe(display, pipe, plane) {
+ for_each_plane_on_pipe(&data->display, pipe, plane) {
igt_plane_set_fb(plane, NULL);
igt_plane_set_position(plane, 0, 0);
}
igt_output_set_pipe(output, PIPE_NONE);
- crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- igt_remove_fb(display->drm_fd, fb);
+ crtc_commit(data->primary->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+/* Returns true if plane supports zpos property. */
+static bool has_zpos(igt_plane_t *plane)
+{
+ return igt_plane_has_prop(plane, IGT_PLANE_ZPOS);
}
igt_main
{
- igt_display_t display;
enum pipe pipe = PIPE_NONE;
- igt_pipe_t *pipe_obj;
igt_output_t *output = NULL;
- igt_plane_t *primary = NULL;
- drmModeModeInfo *mode;
- struct igt_fb fb;
- bool valid_config = false;
+ data_t data = { 0 };
igt_fixture {
- display.drm_fd = drm_open_driver_master(DRIVER_ANY);
+ data.drm_fd = drm_open_driver_master(DRIVER_ANY);
kmstest_set_vt_graphics_mode();
- igt_display_require(&display, display.drm_fd);
- igt_require(display.is_atomic);
- igt_display_require_output(&display);
-
- for_each_pipe_with_valid_output(&display, pipe, output) {
- igt_display_reset(&display);
-
- igt_output_set_pipe(output, pipe);
- if (i915_pipe_output_combo_valid(&display)) {
- valid_config = true;
- break;
- }
- }
- igt_require(valid_config);
-
- pipe_obj = &display.pipes[pipe];
- primary = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_PRIMARY);
-
- mode = igt_output_get_mode(output);
-
- igt_create_pattern_fb(display.drm_fd,
- mode->hdisplay, mode->vdisplay,
- plane_get_igt_format(primary),
- DRM_FORMAT_MOD_LINEAR, &fb);
+ igt_display_require(&data.display, data.drm_fd);
+ igt_require(data.display.is_atomic);
+ igt_display_require_output(&data.display);
}
igt_describe("Test for KMS atomic modesetting on overlay plane and ensure coherency between "
"the legacy and atomic interfaces.");
- igt_subtest("plane-overlay-legacy") {
- igt_plane_t *overlay =
- igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
- igt_require(overlay);
-
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_overlay(pipe_obj, output, overlay);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("plane-overlay-legacy") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_plane_t *overlay =
+ igt_pipe_get_plane_type(&data.display.pipes[pipe], DRM_PLANE_TYPE_OVERLAY);
+ uint32_t format = plane_get_igt_format(overlay);
+
+ if (!overlay || !format)
+ continue;
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ plane_overlay(&data, output, overlay, format);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test for KMS atomic modesetting on primary plane and ensure coherency between "
"the legacy and atomic interfaces.");
- igt_subtest("plane-primary-legacy") {
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_primary(pipe_obj, primary, &fb);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("plane-primary-legacy") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ plane_primary(&data);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Verify that the overlay plane can cover the primary one (and "\
"vice versa) by changing their zpos property.");
- igt_subtest("plane-primary-overlay-mutable-zpos") {
- uint32_t format_primary = DRM_FORMAT_ARGB8888;
- uint32_t format_overlay = DRM_FORMAT_ARGB1555;
- igt_plane_t *overlay =
- igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
- igt_require(overlay);
-
- igt_info("Using (pipe %s + %s) to run the subtest.\n",
- kmstest_pipe_name(pipe), igt_output_name(output));
+ igt_subtest_with_dynamic("plane-primary-overlay-mutable-zpos") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_plane_t *overlay =
+ igt_pipe_get_plane_type(&data.display.pipes[pipe], DRM_PLANE_TYPE_OVERLAY);
- igt_display_reset(&display);
-
- igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
- igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
-
- igt_require(igt_plane_has_format_mod(primary, format_primary, 0x0));
- igt_require(igt_plane_has_format_mod(overlay, format_overlay, 0x0));
-
- igt_output_set_pipe(output, pipe);
- plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
- format_primary, format_overlay);
- atomic_clear(&display, pipe, primary, output, &fb);
+ atomic_setup(&data, pipe, output);
+ if (!overlay)
+ continue;
+ if (!has_zpos(data.primary) || !has_zpos(overlay))
+ continue;
+ if (!igt_plane_has_format_mod(data.primary, DRM_FORMAT_ARGB8888, 0x0) ||
+ !igt_plane_has_format_mod(overlay, DRM_FORMAT_ARGB1555, 0x0))
+ continue;
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ plane_primary_overlay_mutable_zpos(&data, output, overlay,
+ DRM_FORMAT_ARGB8888, DRM_FORMAT_ARGB1555);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Verify the reported zpos property of planes by making sure "\
"only higher zpos planes cover the lower zpos ones.");
- igt_subtest("plane-immutable-zpos") {
- int n_planes = pipe_obj->n_planes;
- igt_require(n_planes >= 2);
+ igt_subtest_with_dynamic("plane-immutable-zpos") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ int n_planes = data.display.pipes[pipe].n_planes;
- igt_info("Using (pipe %s + %s) to run the subtest.\n",
- kmstest_pipe_name(pipe), igt_output_name(output));
-
- igt_display_reset(&display);
- igt_output_set_pipe(output, pipe);
- plane_immutable_zpos(&display, pipe_obj, output, primary, n_planes);
- atomic_clear(&display, pipe, primary, output, &fb);
+ if (n_planes < 2)
+ continue;
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ plane_immutable_zpos(&data, output, pipe, n_planes);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches "
"the free-standing state objects and nothing else.");
- igt_subtest("test-only") {
- uint32_t format = plane_get_igt_format(primary);
- igt_require(format != 0);
+ igt_subtest_with_dynamic("test-only") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ uint32_t format;
- igt_info("Using (pipe %s + %s) to run the subtest.\n",
- kmstest_pipe_name(pipe), igt_output_name(output));
+ atomic_setup(&data, pipe, output);
+ format = plane_get_igt_format(data.primary);
- atomic_clear(&display, pipe, primary, output, &fb);
- test_only(pipe_obj, primary, output, format);
+ if (!format)
+ continue;
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_clear(&data, pipe, output);
+ test_only(&data, output, pipe, format);
+ }
+ break;
+ }
}
igt_describe("Test for KMS atomic modesetting on cursor plane and ensure coherency between "
"legacy and atomic interfaces.");
- igt_subtest("plane-cursor-legacy") {
- igt_plane_t *cursor =
- igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_CURSOR);
- igt_require(cursor);
-
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_cursor(pipe_obj, output, cursor);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("plane-cursor-legacy") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_plane_t *cursor =
+ igt_pipe_get_plane_type(&data.display.pipes[pipe], DRM_PLANE_TYPE_CURSOR);
+
+ if (!cursor)
+ continue;
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ plane_cursor(&data, output, cursor);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test error handling when invalid plane parameters are passed");
- igt_subtest("plane-invalid-params") {
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_invalid_params(pipe_obj, output, primary, &fb);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("plane-invalid-params") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ plane_invalid_params(&data, output);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test error handling when invalid plane fence parameters are passed");
- igt_subtest("plane-invalid-params-fence") {
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_invalid_params_fence(pipe_obj, output, primary);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("plane-invalid-params-fence") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ plane_invalid_params_fence(&data, output);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test error handling when invalid crtc parameters are passed");
- igt_subtest("crtc-invalid-params") {
- atomic_setup(&display, pipe, output, primary, &fb);
- crtc_invalid_params(pipe_obj, output, primary, &fb);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("crtc-invalid-params") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ crtc_invalid_params(&data, output);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test error handling when invalid crtc fence parameters are passed");
- igt_subtest("crtc-invalid-params-fence") {
- atomic_setup(&display, pipe, output, primary, &fb);
- crtc_invalid_params_fence(pipe_obj, output, primary, &fb);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("crtc-invalid-params-fence") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ crtc_invalid_params_fence(&data, output);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Test abuse the atomic ioctl directly in order to test "
"various invalid conditions which the libdrm wrapper won't "
"allow us to create.");
- igt_subtest("atomic-invalid-params") {
- atomic_setup(&display, pipe, output, primary, &fb);
- atomic_invalid_params(pipe_obj, primary, output, &fb);
- atomic_clear(&display, pipe, primary, output, &fb);
+ igt_subtest_with_dynamic("atomic-invalid-params") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&data, pipe, output);
+ atomic_invalid_params(&data, output);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_describe("Simple test cases to use FB_DAMAGE_CLIPS plane property");
- igt_subtest("atomic-plane-damage") {
- igt_require(igt_plane_has_prop(primary, IGT_PLANE_FB_DAMAGE_CLIPS));
+ igt_subtest_with_dynamic("atomic-plane-damage") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ atomic_setup(&data, pipe, output);
- atomic_setup(&display, pipe, output, primary, &fb);
- atomic_plane_damage(pipe_obj, primary, &fb);
- atomic_clear(&display, pipe, primary, output, &fb);
+ if (!igt_plane_has_prop(data.primary, IGT_PLANE_FB_DAMAGE_CLIPS))
+ continue;
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_plane_damage(&data);
+ atomic_clear(&data, pipe, output);
+ }
+ break;
+ }
}
igt_fixture {
- igt_display_fini(&display);
- drm_close_driver(display.drm_fd);
+ igt_display_fini(&data.display);
+ drm_close_driver(data.drm_fd);
}
}
--
2.25.1
More information about the igt-dev
mailing list