[igt-dev] [v2 3/6] tests/kms_atomic: test cleanup
Karthik B S
karthik.b.s at intel.com
Fri Oct 13 03:32:31 UTC 2023
On 10/10/2023 11:29 AM, Swati Sharma wrote:
> Use atomic_clear() for all subtests. Also, move all igt_require()
> before calling test_only().
>
> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
Reviewed-by: Karthik B S <karthik.b.s at intel.com>
> ---
> tests/kms_atomic.c | 49 ++++++++++++++++++++++++++--------------------
> 1 file changed, 28 insertions(+), 21 deletions(-)
>
> diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
> index f984d34f0..c55cb5b2f 100644
> --- a/tests/kms_atomic.c
> +++ b/tests/kms_atomic.c
> @@ -393,27 +393,23 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
> */
> static void
> plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
> - igt_output_t *output)
> + igt_output_t *output, igt_plane_t *primary, int n_planes)
> {
> cairo_t *cr;
> struct igt_fb fb_ref;
> - igt_plane_t *primary;
> drmModeModeInfo *mode;
> igt_pipe_crc_t *pipe_crc;
> igt_crc_t ref_crc, new_crc;
> int fb_id_lower, fb_id_upper;
> - int n_planes = pipe->n_planes;
> igt_plane_t *plane_ptr[n_planes];
> struct igt_fb fb_lower, fb_upper;
> uint32_t w_lower, h_lower, w_upper, h_upper;
>
> memset(plane_ptr, 0, n_planes * sizeof(igt_plane_t *));
>
> - igt_require(n_planes >= 2);
> igt_require_pipe_crc(display->drm_fd);
>
> mode = igt_output_get_mode(output);
> - primary = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
>
> /* for lower plane */
> w_lower = mode->hdisplay;
> @@ -643,17 +639,13 @@ static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *f
> * Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches the
> * free-standing state objects and nothing else.
> */
> -static void test_only(igt_pipe_t *pipe_obj,
> - igt_plane_t *primary,
> - igt_output_t *output)
> +static void test_only(igt_pipe_t *pipe_obj, igt_plane_t *primary,
> + igt_output_t *output, uint32_t format)
> {
> drmModeModeInfo *mode = igt_output_get_mode(output);
> - uint32_t format = plane_get_igt_format(primary);
> struct igt_fb fb;
> uint64_t old_plane_values[IGT_NUM_PLANE_PROPS], old_crtc_values[IGT_NUM_CRTC_PROPS];
>
> - igt_require(format != 0);
> -
> plane_get_current_state(primary, old_plane_values);
> crtc_get_current_state(pipe_obj, old_crtc_values);
>
> @@ -1388,7 +1380,8 @@ static void atomic_setup(igt_display_t *display, enum pipe pipe, igt_output_t *o
> crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> }
>
> -static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *primary, igt_output_t *output)
> +static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *primary,
> + igt_output_t *output, struct igt_fb *fb)
> {
> igt_plane_t *plane;
>
> @@ -1399,6 +1392,7 @@ static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *pr
>
> igt_output_set_pipe(output, PIPE_NONE);
> crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_remove_fb(display->drm_fd, fb);
> }
>
> igt_main
> @@ -1450,6 +1444,7 @@ igt_main
>
> atomic_setup(&display, pipe, output, primary, &fb);
> plane_overlay(pipe_obj, output, overlay);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test for KMS atomic modesetting on primary plane and ensure coherency between "
> @@ -1457,6 +1452,7 @@ igt_main
> igt_subtest("plane-primary-legacy") {
> atomic_setup(&display, pipe, output, primary, &fb);
> plane_primary(pipe_obj, primary, &fb);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Verify that the overlay plane can cover the primary one (and "\
> @@ -1464,14 +1460,14 @@ igt_main
> igt_subtest("plane-primary-overlay-mutable-zpos") {
> uint32_t format_primary = DRM_FORMAT_ARGB8888;
> uint32_t format_overlay = DRM_FORMAT_ARGB1555;
> - igt_plane_t *overlay;
> + igt_plane_t *overlay =
> + igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
> + igt_require(overlay);
>
> igt_info("Using (pipe %s + %s) to run the subtest.\n",
> kmstest_pipe_name(pipe), igt_output_name(output));
>
> igt_display_reset(&display);
> - overlay = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
> - igt_require(overlay);
>
> igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
> igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
> @@ -1482,28 +1478,35 @@ igt_main
> igt_output_set_pipe(output, pipe);
> plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
> format_primary, format_overlay);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Verify the reported zpos property of planes by making sure "\
> "only higher zpos planes cover the lower zpos ones.");
> igt_subtest("plane-immutable-zpos") {
> + int n_planes = pipe_obj->n_planes;
> + igt_require(n_planes >= 2);
> +
> igt_info("Using (pipe %s + %s) to run the subtest.\n",
> kmstest_pipe_name(pipe), igt_output_name(output));
>
> igt_display_reset(&display);
> igt_output_set_pipe(output, pipe);
> - plane_immutable_zpos(&display, pipe_obj, output);
> + plane_immutable_zpos(&display, pipe_obj, output, primary, n_planes);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches "
> "the free-standing state objects and nothing else.");
> igt_subtest("test-only") {
> - atomic_clear(&display, pipe, primary, output);
> + uint32_t format = plane_get_igt_format(primary);
> + igt_require(format != 0);
>
> igt_info("Using (pipe %s + %s) to run the subtest.\n",
> kmstest_pipe_name(pipe), igt_output_name(output));
>
> - test_only(pipe_obj, primary, output);
> + atomic_clear(&display, pipe, primary, output, &fb);
> + test_only(pipe_obj, primary, output, format);
> }
>
> igt_describe("Test for KMS atomic modesetting on cursor plane and ensure coherency between "
> @@ -1515,30 +1518,35 @@ igt_main
>
> atomic_setup(&display, pipe, output, primary, &fb);
> plane_cursor(pipe_obj, output, cursor);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test error handling when invalid plane parameters are passed");
> igt_subtest("plane-invalid-params") {
> atomic_setup(&display, pipe, output, primary, &fb);
> plane_invalid_params(pipe_obj, output, primary, &fb);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test error handling when invalid plane fence parameters are passed");
> igt_subtest("plane-invalid-params-fence") {
> atomic_setup(&display, pipe, output, primary, &fb);
> plane_invalid_params_fence(pipe_obj, output, primary);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test error handling when invalid crtc parameters are passed");
> igt_subtest("crtc-invalid-params") {
> atomic_setup(&display, pipe, output, primary, &fb);
> crtc_invalid_params(pipe_obj, output, primary, &fb);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test error handling when invalid crtc fence parameters are passed");
> igt_subtest("crtc-invalid-params-fence") {
> atomic_setup(&display, pipe, output, primary, &fb);
> crtc_invalid_params_fence(pipe_obj, output, primary, &fb);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Test abuse the atomic ioctl directly in order to test "
> @@ -1547,6 +1555,7 @@ igt_main
> igt_subtest("atomic-invalid-params") {
> atomic_setup(&display, pipe, output, primary, &fb);
> atomic_invalid_params(pipe_obj, primary, output, &fb);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_describe("Simple test cases to use FB_DAMAGE_CLIPS plane property");
> @@ -1555,12 +1564,10 @@ igt_main
>
> atomic_setup(&display, pipe, output, primary, &fb);
> atomic_plane_damage(pipe_obj, primary, &fb);
> + atomic_clear(&display, pipe, primary, output, &fb);
> }
>
> igt_fixture {
> - atomic_clear(&display, pipe, primary, output);
> - igt_remove_fb(display.drm_fd, &fb);
> -
> igt_display_fini(&display);
> drm_close_driver(display.drm_fd);
> }
More information about the igt-dev
mailing list