[igt-dev] [PATCH i-g-t 3/6] tests/kms_atomic: test cleanup
Swati Sharma
swati2.sharma at intel.com
Mon Sep 18 05:13:29 UTC 2023
Use atomic_clear() for all subtests.
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/kms_atomic.c | 49 ++++++++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 21 deletions(-)
diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
index f984d34f0..c55cb5b2f 100644
--- a/tests/kms_atomic.c
+++ b/tests/kms_atomic.c
@@ -393,27 +393,23 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
*/
static void
plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
- igt_output_t *output)
+ igt_output_t *output, igt_plane_t *primary, int n_planes)
{
cairo_t *cr;
struct igt_fb fb_ref;
- igt_plane_t *primary;
drmModeModeInfo *mode;
igt_pipe_crc_t *pipe_crc;
igt_crc_t ref_crc, new_crc;
int fb_id_lower, fb_id_upper;
- int n_planes = pipe->n_planes;
igt_plane_t *plane_ptr[n_planes];
struct igt_fb fb_lower, fb_upper;
uint32_t w_lower, h_lower, w_upper, h_upper;
memset(plane_ptr, 0, n_planes * sizeof(igt_plane_t *));
- igt_require(n_planes >= 2);
igt_require_pipe_crc(display->drm_fd);
mode = igt_output_get_mode(output);
- primary = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
/* for lower plane */
w_lower = mode->hdisplay;
@@ -643,17 +639,13 @@ static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *f
* Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches the
* free-standing state objects and nothing else.
*/
-static void test_only(igt_pipe_t *pipe_obj,
- igt_plane_t *primary,
- igt_output_t *output)
+static void test_only(igt_pipe_t *pipe_obj, igt_plane_t *primary,
+ igt_output_t *output, uint32_t format)
{
drmModeModeInfo *mode = igt_output_get_mode(output);
- uint32_t format = plane_get_igt_format(primary);
struct igt_fb fb;
uint64_t old_plane_values[IGT_NUM_PLANE_PROPS], old_crtc_values[IGT_NUM_CRTC_PROPS];
- igt_require(format != 0);
-
plane_get_current_state(primary, old_plane_values);
crtc_get_current_state(pipe_obj, old_crtc_values);
@@ -1388,7 +1380,8 @@ static void atomic_setup(igt_display_t *display, enum pipe pipe, igt_output_t *o
crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
}
-static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *primary, igt_output_t *output)
+static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *primary,
+ igt_output_t *output, struct igt_fb *fb)
{
igt_plane_t *plane;
@@ -1399,6 +1392,7 @@ static void atomic_clear(igt_display_t *display, enum pipe pipe, igt_plane_t *pr
igt_output_set_pipe(output, PIPE_NONE);
crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
+ igt_remove_fb(display->drm_fd, fb);
}
igt_main
@@ -1450,6 +1444,7 @@ igt_main
atomic_setup(&display, pipe, output, primary, &fb);
plane_overlay(pipe_obj, output, overlay);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test for KMS atomic modesetting on primary plane and ensure coherency between "
@@ -1457,6 +1452,7 @@ igt_main
igt_subtest("plane-primary-legacy") {
atomic_setup(&display, pipe, output, primary, &fb);
plane_primary(pipe_obj, primary, &fb);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Verify that the overlay plane can cover the primary one (and "\
@@ -1464,14 +1460,14 @@ igt_main
igt_subtest("plane-primary-overlay-mutable-zpos") {
uint32_t format_primary = DRM_FORMAT_ARGB8888;
uint32_t format_overlay = DRM_FORMAT_ARGB1555;
- igt_plane_t *overlay;
+ igt_plane_t *overlay =
+ igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
+ igt_require(overlay);
igt_info("Using (pipe %s + %s) to run the subtest.\n",
kmstest_pipe_name(pipe), igt_output_name(output));
igt_display_reset(&display);
- overlay = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
- igt_require(overlay);
igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
@@ -1482,28 +1478,35 @@ igt_main
igt_output_set_pipe(output, pipe);
plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
format_primary, format_overlay);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Verify the reported zpos property of planes by making sure "\
"only higher zpos planes cover the lower zpos ones.");
igt_subtest("plane-immutable-zpos") {
+ int n_planes = pipe_obj->n_planes;
+ igt_require(n_planes >= 2);
+
igt_info("Using (pipe %s + %s) to run the subtest.\n",
kmstest_pipe_name(pipe), igt_output_name(output));
igt_display_reset(&display);
igt_output_set_pipe(output, pipe);
- plane_immutable_zpos(&display, pipe_obj, output);
+ plane_immutable_zpos(&display, pipe_obj, output, primary, n_planes);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches "
"the free-standing state objects and nothing else.");
igt_subtest("test-only") {
- atomic_clear(&display, pipe, primary, output);
+ uint32_t format = plane_get_igt_format(primary);
+ igt_require(format != 0);
igt_info("Using (pipe %s + %s) to run the subtest.\n",
kmstest_pipe_name(pipe), igt_output_name(output));
- test_only(pipe_obj, primary, output);
+ atomic_clear(&display, pipe, primary, output, &fb);
+ test_only(pipe_obj, primary, output, format);
}
igt_describe("Test for KMS atomic modesetting on cursor plane and ensure coherency between "
@@ -1515,30 +1518,35 @@ igt_main
atomic_setup(&display, pipe, output, primary, &fb);
plane_cursor(pipe_obj, output, cursor);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test error handling when invalid plane parameters are passed");
igt_subtest("plane-invalid-params") {
atomic_setup(&display, pipe, output, primary, &fb);
plane_invalid_params(pipe_obj, output, primary, &fb);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test error handling when invalid plane fence parameters are passed");
igt_subtest("plane-invalid-params-fence") {
atomic_setup(&display, pipe, output, primary, &fb);
plane_invalid_params_fence(pipe_obj, output, primary);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test error handling when invalid crtc parameters are passed");
igt_subtest("crtc-invalid-params") {
atomic_setup(&display, pipe, output, primary, &fb);
crtc_invalid_params(pipe_obj, output, primary, &fb);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test error handling when invalid crtc fence parameters are passed");
igt_subtest("crtc-invalid-params-fence") {
atomic_setup(&display, pipe, output, primary, &fb);
crtc_invalid_params_fence(pipe_obj, output, primary, &fb);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Test abuse the atomic ioctl directly in order to test "
@@ -1547,6 +1555,7 @@ igt_main
igt_subtest("atomic-invalid-params") {
atomic_setup(&display, pipe, output, primary, &fb);
atomic_invalid_params(pipe_obj, primary, output, &fb);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_describe("Simple test cases to use FB_DAMAGE_CLIPS plane property");
@@ -1555,12 +1564,10 @@ igt_main
atomic_setup(&display, pipe, output, primary, &fb);
atomic_plane_damage(pipe_obj, primary, &fb);
+ atomic_clear(&display, pipe, primary, output, &fb);
}
igt_fixture {
- atomic_clear(&display, pipe, primary, output);
- igt_remove_fb(display.drm_fd, &fb);
-
igt_display_fini(&display);
drm_close_driver(display.drm_fd);
}
--
2.25.1
More information about the igt-dev
mailing list