[i-g-t V5 1/8] lib/igt_kms: Split the bigjoiner check into multiple

[Jani Nikula]

On Mon, 29 Apr 2024, Bhanuprakash Modem <bhanuprakash.modem at intel.com> wrote:
> To increase the readabilty, split the bigjoiner check
> into multiple small ones. So that it would be easy to
> extend/fix the logic further.

Please use primary/secondary instead of master/slave terminology.

BR,
Jani.


>
> Cc: Kunal Joshi <kunal1.joshi at intel.com>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> ---
>  lib/igt_kms.c | 57 ++++++++++++++++++++++++++++++++++++++++++---------
>  1 file changed, 47 insertions(+), 10 deletions(-)
>
> diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> index 98d3fb79c..6a41b535b 100644
> --- a/lib/igt_kms.c
> +++ b/lib/igt_kms.c
> @@ -6357,6 +6357,7 @@ bool igt_check_bigjoiner_support(igt_display_t *display)
>  	struct {
>  		enum pipe idx;
>  		drmModeModeInfo *mode;
> +		igt_output_t *output;
>  	} pipes[IGT_MAX_PIPES];
>  	int max_dotclock;
>  
> @@ -6374,11 +6375,12 @@ bool igt_check_bigjoiner_support(igt_display_t *display)
>  
>  		pipes[pipes_in_use].idx = output->pending_pipe;
>  		pipes[pipes_in_use].mode = igt_output_get_mode(output);
> +		pipes[pipes_in_use].output = output;
>  		pipes_in_use++;
>  	}
>  
>  	if (!pipes_in_use) {
> -		igt_debug("We must set at least one output to pipe.\n");
> +		igt_info("We must set at least one output to pipe.\n");
>  		return true;
>  	}
>  
> @@ -6395,16 +6397,51 @@ bool igt_check_bigjoiner_support(igt_display_t *display)
>  	 *  - current & previous crtcs are consecutive
>  	 */
>  	for (i = 0; i < pipes_in_use; i++) {
> -		if ((igt_bigjoiner_possible(pipes[i].mode, max_dotclock) &&
> -		     ((pipes[i].idx >= (total_pipes - 1)) ||
> -		      (!display->pipes[pipes[i].idx + 1].enabled) ||
> -		      ((i < (pipes_in_use - 1)) && (abs(pipes[i + 1].idx - pipes[i].idx) <= 1)))) ||
> -		    ((i > 0) && igt_bigjoiner_possible(pipes[i - 1].mode, max_dotclock) &&
> -		     ((!display->pipes[pipes[i - 1].idx + 1].enabled) ||
> -		      (abs(pipes[i].idx - pipes[i - 1].idx) <= 1)))) {
> -			igt_debug("Pipe/Output combo is not possible with selected mode(s).\n");
> +		if (igt_bigjoiner_possible(pipes[i].mode, max_dotclock)) {
> +			igt_info("pipe-%s-%s: (Max dot-clock: %d KHz)",
> +				 kmstest_pipe_name(pipes[i].idx),
> +				 igt_output_name(pipes[i].output),
> +				 max_dotclock);
> +			kmstest_dump_mode(pipes[i].mode);
> +
> +			if (pipes[i].idx >= (total_pipes - 1)) {
> +				igt_info("pipe-%s: Last pipe couldn't be used as a bigjoiner master.\n",
> +					 kmstest_pipe_name(pipes[i].idx));
> +				return false;
> +			}
>  
> -			return false;
> +			if (!display->pipes[pipes[i].idx + 1].enabled) {
> +				igt_info("Consecutive pipe-%s: not available to use it as a bigjoiner slave.\n",
> +					 kmstest_pipe_name(display->pipes[pipes[i].idx + 1].pipe));
> +				return false;
> +			}
> +
> +			if ((i < (pipes_in_use - 1)) &&
> +			    (abs(pipes[i + 1].idx - pipes[i].idx) <= 1)) {
> +				igt_info("Consecutive pipe-%s: not free to use it as a bigjoiner slave.\n",
> +					 kmstest_pipe_name(pipes[i + 1].idx));
> +				return false;
> +			}
> +		}
> +
> +		if ((i > 0) && igt_bigjoiner_possible(pipes[i - 1].mode, max_dotclock)) {
> +			igt_info("pipe-%s-%s: (Max dot-clock: %d KHz)",
> +				 kmstest_pipe_name(pipes[i - 1].idx),
> +				 igt_output_name(pipes[i - 1].output),
> +				 max_dotclock);
> +			kmstest_dump_mode(pipes[i - 1].mode);
> +
> +			if (!display->pipes[pipes[i - 1].idx + 1].enabled) {
> +				igt_info("Consecutive pipe-%s: not available to use it as a bigjoiner slave.\n",
> +					 kmstest_pipe_name(display->pipes[pipes[i - 1].idx + 1].pipe));
> +				return false;
> +			}
> +
> +			if (abs(pipes[i].idx - pipes[i - 1].idx) <= 1) {
> +				igt_info("Consecutive pipe-%s: not free to use it as a bigjoiner slave.\n",
> +					 kmstest_pipe_name(pipes[i].idx));
> +				return false;
> +			}
>  		}
>  	}

-- 
Jani Nikula, Intel