[Bug 89945] xf86-video-intel-2.99.917 should allow edid override to known edid.bin file for AVR+TV combinations

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=89945

--- Comment #17 from lucas oldfield <lucas.oldfield at gmail.com> ---
Ok I've finally got a new TV up in my living room and time to try some of this
debuggging.. it took a while to get everything built and installed but I
finally got there tonight :)

FYI the old hack was still working just fine.

I can get the display to fail by just changing the TV from HDMI1 to HDMI2 when
connected through the AVR.

I've attached the log to the issue.

lucas at tvbox:~$ sudo sh -c "echo
'*********************************************************************' >
/dev/kmsg"
lucas at tvbox:~$ sudo service lightdm restart
lucas at tvbox:~$ sudo sh -c "echo LIGHTDM IS UP ALL OK > /dev/kmsg"
lucas at tvbox:~$ sudo sh -c "echo SWITCHING FROM HDMI1 to HDMI2 on TV >
/dev/kmsg"
lucas at tvbox:~$ sudo sh -c "echo HDMI2 enabled on TV.. as in NOT the input used
from linux > /dev/kmsg"
lucas at tvbox:~$ sudo sh -c "echo SWITCHING FROM HDMI2 to HDMI1 on TV >
/dev/kmsg"
lucas at tvbox:~$ sudo sh -c "echo HDMI1 enabled and TV is blank. no display! >
/dev/kmsg"


these are my text markers..

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/intel-gfx-bugs/attachments/20150710/dddae29d/attachment.html>