[PATCH 03/16] drm/i915/dp: Do not check for min DSC BPC for MST case

Ankit Nautiyal ankit.k.nautiyal at intel.com
Fri Apr 28 11:32:29 UTC 2023


For DSC the min BPC is 8 for ICL+ and so the min pipe_bpp is 24.
Check this condition for cases only where pipe_bpp is to be computed.
For MST case the pipe_bpp is already computed (hardcoded to be 24),
and this check is not required.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 46 ++++++++++++++++---------
 1 file changed, 30 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 3d828ea0894d..d061fc3fa402 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1480,6 +1480,13 @@ static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
 	return drm_dsc_compute_rc_parameters(vdsc_cfg);
 }
 
+static
+bool is_dsc_pipe_bpp_sufficient(struct drm_i915_private *i915, int pipe_bpp)
+{
+	/* Min Input BPC for ICL+ is 8 */
+	return (pipe_bpp < 8 * 3);
+}
+
 int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 				struct intel_crtc_state *pipe_config,
 				struct drm_connector_state *conn_state,
@@ -1491,7 +1498,6 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
 	const struct drm_display_mode *adjusted_mode =
 		&pipe_config->hw.adjusted_mode;
-	int pipe_bpp;
 	int ret;
 
 	pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) &&
@@ -1501,27 +1507,35 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 		return -EINVAL;
 
 	if (intel_dp->force_dsc_bpc && compute_pipe_bpp) {
-		pipe_bpp = intel_dp->force_dsc_bpc * 3;
-		drm_dbg_kms(&dev_priv->drm, "Input DSC BPP forced to %d\n", pipe_bpp);
-	} else if (compute_pipe_bpp) {
-		pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, conn_state->max_requested_bpc);
-	} else {
-		pipe_bpp = pipe_config->pipe_bpp;
-	}
+		int forced_bpc = intel_dp->force_dsc_bpc;
+		int forced_bpp = forced_bpc * 3;
 
-	/* Min Input BPC for ICL+ is 8 */
-	if (pipe_bpp < 8 * 3) {
-		drm_dbg_kms(&dev_priv->drm,
-			    "No DSC support for less than 8bpc\n");
-		return -EINVAL;
+		/* Min Input BPC for ICL+ is 8 */
+		if (forced_bpc < 8) {
+			drm_dbg_kms(&dev_priv->drm,
+				    "Cannot force dsc bpc:%d, due to dsc bpc limits\n",
+				    intel_dp->force_dsc_bpc);
+			return -EINVAL;
+		}
+		pipe_config->pipe_bpp = forced_bpp;
+		drm_dbg_kms(&dev_priv->drm, "Input DSC BPP forced to %d\n",
+			    pipe_config->pipe_bpp);
+	} else if (compute_pipe_bpp) {
+		int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp,
+							conn_state->max_requested_bpc);
+		if (!is_dsc_pipe_bpp_sufficient(dev_priv, pipe_bpp)) {
+			drm_dbg_kms(&dev_priv->drm,
+				    "No DSC support for less than 8bpc\n");
+			return -EINVAL;
+		}
+		pipe_config->pipe_bpp = pipe_bpp;
 	}
 
 	/*
-	 * For now enable DSC for max bpp, max link rate, max lane count.
+	 * For now enable DSC for max link rate, max lane count.
 	 * Optimize this later for the minimum possible link rate/lane count
 	 * with DSC enabled for the requested mode.
 	 */
-	pipe_config->pipe_bpp = pipe_bpp;
 	pipe_config->port_clock = limits->max_rate;
 	pipe_config->lane_count = limits->max_lane_count;
 
@@ -1544,7 +1558,7 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 							    adjusted_mode->crtc_clock,
 							    adjusted_mode->crtc_hdisplay,
 							    pipe_config->bigjoiner_pipes,
-							    pipe_bpp,
+							    pipe_config->pipe_bpp,
 							    timeslots);
 			if (!dsc_max_output_bpp) {
 				drm_dbg_kms(&dev_priv->drm,
-- 
2.25.1



More information about the Intel-gfx-trybot mailing list