April 2023 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Apr 1 00:54:58 UTC 2023
Ending: Fri Apr 28 21:41:39 UTC 2023
Messages: 245

• [i-g-t 1/2] lib/kms: Get pipe enum from debugfs   Bhanuprakash Modem
• [i-g-t 1/2] tests/kms_vrr: New VRR test to toggle the VRR during fastsets   Bhanuprakash Modem
• [i-g-t 2/2] HAX: Add VRR tests to BAT   Bhanuprakash Modem
• [i-g-t 2/2] tests/kms_lease: Fix the usage of pipe for lessee   Bhanuprakash Modem
• [i-g-t] testplan: Testplan for kms BAT tests   Bhanuprakash Modem
• [PATCH 0/1] kUnit testing   Dominik Karol Piatkowski
• [PATCH 0/2] Handle dma fences in dirtyfb ioctl   Jouni Högander
• [PATCH 0/2] Handle dma fences in dirtyfb ioctl   Jouni Högander
• [PATCH 0/2] Handle dma fences in dirtyfb ioctl   Jouni Högander
• [PATCH 0/2] Handle dma fences in dirtyfb ioctl   Jouni Högander
• [PATCH 0/2] Handle dma fences in dirtyfb ioctl   Jouni Högander
• [PATCH 0/2] Handle dma fences in dirtyfb ioctl   Jouni Högander
• [PATCH 0/6] drm/i915/mtl: C10 phy support   Mika Kahola
• [PATCH 0/7] drm/i915/mtl: C10 phy testing   Mika Kahola
• [PATCH 0/8] drm/i915/mtl: C10 phy support   Mika Kahola
• [PATCH 0/8] drm/i915/mtl: C10 phy support   Mika Kahola
• [PATCH 00/12] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes   Ankit Nautiyal
• [PATCH 00/13] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes   Ankit Nautiyal
• [PATCH 00/16] Add DSC fractional bpp support   Ankit Nautiyal
• [PATCH 01/12] drm/i915/display: Add new member to configure PCON color conversion   Ankit Nautiyal
• [PATCH 01/13] drm/i915/display: Add new member to configure PCON color conversion   Ankit Nautiyal
• [PATCH 01/16] drm/i915/dp: Remove extra logs for printing DSC info   Ankit Nautiyal
• [PATCH 02/12] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format   Ankit Nautiyal
• [PATCH 02/13] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap   Ankit Nautiyal
• [PATCH 02/16] drm/i915/dp: Avoid forcing DSC BPC for MST case   Ankit Nautiyal
• [PATCH 03/12] drm/i915/dp: Configure PCON for conversion of output_format to YCbCr444   Ankit Nautiyal
• [PATCH 03/13] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format   Ankit Nautiyal
• [PATCH 03/16] drm/i915/dp: Do not check for min DSC BPC for MST case   Ankit Nautiyal
• [PATCH 04/12] drm/i915/display: Use sink_format instead of ycbcr420_output flag   Ankit Nautiyal
• [PATCH 04/13] drm/i915/dp: Configure PCON for conversion of output_format to YCbCr444   Ankit Nautiyal
• [PATCH 04/16] drm/i915/dp: Check if dsc forced bpc is in allowed limits   Ankit Nautiyal
• [PATCH 05/12] drm/i915/dp: Add helper to get sink_format   Ankit Nautiyal
• [PATCH 05/13] drm/i915/display: Use sink_format instead of ycbcr420_output flag   Ankit Nautiyal
• [PATCH 05/16] drm/i915/dp: Avoid left shift of DSC output bpp by 4   Ankit Nautiyal
• [PATCH 06/12] drm/i915/dp: Rearrange check for illegal mode and comments in mode_valid   Ankit Nautiyal
• [PATCH 06/13] drm/i915/dp: Add helper to get sink_format   Ankit Nautiyal
• [PATCH 06/16] drm/i915/dp: Rename helpers to get DSC max pipe_bpp/output_bpp   Ankit Nautiyal
• [PATCH 07/12] drm/i915/dp: Consider output_format while computing dsc bpp   Ankit Nautiyal
• [PATCH 07/13] drm/i915/dp: Rearrange check for illegal mode and comments in mode_valid   Ankit Nautiyal
• [PATCH 07/16] drm/i915/dp: Get optimal link config to have best compressed bpp   Ankit Nautiyal
• [PATCH 08/12] drm/i915/dp_mst: Use output_format to get the final link bpp   Ankit Nautiyal
• [PATCH 08/13] drm/i915/dp: Consider output_format while computing dsc bpp   Ankit Nautiyal
• [PATCH 08/16] drm/i915/display: Store compressed bpp in U6.4 format   Ankit Nautiyal
• [PATCH 09/12] drm/i915/dp: Use consistent name for link bpp and compressed bpp   Ankit Nautiyal
• [PATCH 09/13] drm/i915/dp_mst: Use output_format to get the final link bpp   Ankit Nautiyal
• [PATCH 09/16] drm/i915/display: Consider fractional vdsc bpp while computing m_n values   Ankit Nautiyal
• [PATCH 1/1] HAX: i915/Kconfig: enable KUNIT   Dominik Karol Piatkowski
• [PATCH 1/1] HAX: i915/Kconfig: enable KUNIT   Dominik Karol Piatkowski
• [PATCH 1/1] HAX: i915/Kconfig: enable KUNIT   Dominik Karol Piatkowski
• [PATCH 1/1] kUnit testing   Dominik Karol Piatkowski
• [PATCH 1/2] drm/i915/mtl: Set has_llc=0   Nirmoy Das
• [PATCH 1/2] drm/i915: Add new frontbuffer tracking interface to queue flush   Jouni Högander
• [PATCH 1/2] drm/i915: Add new frontbuffer tracking interface to queue flush   Jouni Högander
• [PATCH 1/2] drm/i915: Add new frontbuffer tracking interface to queue flush   Jouni Högander
• [PATCH 1/2] drm/i915: Add new frontbuffer tracking interface to queue flush   Jouni Högander
• [PATCH 1/2] drm/i915: Add new frontbuffer tracking interface to queue flush   Jouni Högander
• [PATCH 1/2] drm/i915: Add new frontbuffer tracking interface to queue flush   Jouni Högander
• [PATCH 1/2] drm/i915: Use separate "DC off" power well for ADL-P and DG2   Imre Deak
• [PATCH 1/2] Revert "drm/i915/mtl: fix mocs selftest"   Andi Shyti
• [PATCH 1/2] Revert "drm/i915: Explain the magic numbers for AUX SYNC/precharge length"   Swati Sharma
• [PATCH 1/3] drm/i915: Add a function to mmap framebuffer obj   Nirmoy Das
• [PATCH 1/5] drm/i915/gem: Add I915_BO_PREALLOC   Nirmoy Das
• [PATCH 1/6] drm/i915/mtl: Initial DDI port setup   Mika Kahola
• [PATCH 1/7] drm/i915/mtl: Initial DDI port setup   Mika Kahola
• [PATCH 1/8] drm/i915/mtl: Initial DDI port setup   Mika Kahola
• [PATCH 1/8] drm/i915: Make IRQ reset and postinstall multi-gt aware   Mika Kahola
• [PATCH 10/12] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC   Ankit Nautiyal
• [PATCH 10/13] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC   Ankit Nautiyal
• [PATCH 10/16] drm/i915/audio : Consider fractional vdsc bpp while computing tu_data   Ankit Nautiyal
• [PATCH 11/12] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP   Ankit Nautiyal
• [PATCH 11/13] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP   Ankit Nautiyal
• [PATCH 11/16] drm/display/dp: Fix the DP DSC Receiver cap size   Ankit Nautiyal
• [PATCH 12/12] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints   Ankit Nautiyal
• [PATCH 12/13] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints   Ankit Nautiyal
• [PATCH 12/16] drm/display/dp: Add helper function to get DSC bpp prescision   Ankit Nautiyal
• [PATCH 13/13] drm/i915/dp: Use consistent name for link bpp and compressed bpp   Ankit Nautiyal
• [PATCH 13/16] drm/i915/dsc/mtl: Add support for fractional bpp   Ankit Nautiyal
• [PATCH 14/16] drm/i915/dp: Iterate over output bpp with fractional step size   Ankit Nautiyal
• [PATCH 15/16] drm/i915/dsc: Add debugfs entry to validate DSC fractional bpp   Ankit Nautiyal
• [PATCH 16/16] drm/i915/dsc: Allow DSC only with fractional bpp when forced from debugfs   Ankit Nautiyal
• [PATCH 2/2] drm/i915/mtl: Define MOCS and PAT tables for MTL   Nirmoy Das
• [PATCH 2/2] drm/i915/mtl: Re-use ADL-P's "DC off" power well   Imre Deak
• [PATCH 2/2] drm/i915: Handle dma fences in dirtyfb callback   Jouni Högander
• [PATCH 2/2] drm/i915: Handle dma fences in dirtyfb callback   Jouni Högander
• [PATCH 2/2] drm/i915: Handle dma fences in dirtyfb callback   Jouni Högander
• [PATCH 2/2] drm/i915: Handle dma fences in dirtyfb callback   Jouni Högander
• [PATCH 2/2] drm/i915: Handle dma fences in dirtyfb callback   Jouni Högander
• [PATCH 2/2] drm/i915: Handle dma fences in dirtyfb callback   Jouni Högander
• [PATCH 2/2] Revert "drm/i915/mtl: Define MOCS and PAT tables for MTL"   Andi Shyti
• [PATCH 2/2] Revert "drm/i915: Fix fast wake AUX sync len"   Swati Sharma
• [PATCH 2/3] drm/i915/display: Add helper func to get intel_fbdev from drm_fb_helper   Nirmoy Das
• [PATCH 2/5] drm/i915/display: Set I915_BO_ALLOC_USER for fb   Nirmoy Das
• [PATCH 2/6] drm/i915/mtl: Add DP rates   Mika Kahola
• [PATCH 2/7] drm/i915/mtl: Add DP rates   Mika Kahola
• [PATCH 2/8] drm/i915/mtl: Add DP rates   Mika Kahola
• [PATCH 2/8] drm/i915/mtl: Initial DDI port setup   Mika Kahola
• [PATCH 3/3] drm/i915/display: Implement fb_mmap callback function   Nirmoy Das
• [PATCH 3/5] drm/i915: Add a function to mmap framebuffer obj   Nirmoy Das
• [PATCH 3/6] drm/i915/mtl: Create separate reg file for PICA registers   Mika Kahola
• [PATCH 3/7] drm/i915/mtl: Create separate reg file for PICA registers   Mika Kahola
• [PATCH 3/8] drm/i915/mtl: Add DP rates   Mika Kahola
• [PATCH 3/8] drm/i915/mtl: Create separate reg file for PICA registers   Mika Kahola
• [PATCH 4/5] drm/i915/display: Add helper func to get intel_fbdev from drm_fb_helper   Nirmoy Das
• [PATCH 4/6] drm/i915/mtl: Add Support for C10 PHY message bus and pll programming   Mika Kahola
• [PATCH 4/7] drm/i915/mtl: Add Support for C10 PHY message bus and pll programming   Mika Kahola
• [PATCH 4/8] drm/i915/mtl: Add Support for C10 PHY message bus and pll programming   Mika Kahola
• [PATCH 4/8] drm/i915/mtl: Create separate reg file for PICA registers   Mika Kahola
• [PATCH 5/5] drm/i915/display: Implement fb_mmap callback function   Nirmoy Das
• [PATCH 5/6] drm/i915/mtl: Add vswing programming for C10 phys   Mika Kahola
• [PATCH 5/7] c10 msgbus fixes   Mika Kahola
• [PATCH 5/8] drm/i915/mtl: Add Support for C10 PHY message bus and pll programming   Mika Kahola
• [PATCH 5/8] drm/i915/mtl: Add vswing programming for C10 phys   Mika Kahola
• [PATCH 5/9] c10 msgbus fixes   Mika Kahola
• [PATCH 6/6] drm/i915/mtl: MTL PICA hotplug detection   Mika Kahola
• [PATCH 6/7] drm/i915/mtl: Add vswing programming for C10 phys   Mika Kahola
• [PATCH 6/8] c10 msgbus fixes   Mika Kahola
• [PATCH 6/8] drm/i915/mtl: MTL PICA hotplug detection   Mika Kahola
• [PATCH 6/9] drm/i915/mtl: Add vswing programming for C10 phys   Mika Kahola
• [PATCH 7/7] drm/i915/mtl: MTL PICA hotplug detection   Mika Kahola
• [PATCH 7/8] drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI   Mika Kahola
• [PATCH 7/8] drm/i915/mtl: Add vswing programming for C10 phys   Mika Kahola
• [PATCH 7/9] drm/i915/mtl: MTL PICA hotplug detection   Mika Kahola
• [PATCH 8/8] drm/i915/mtl/display: Implement DisplayPort sequences   Mika Kahola
• [PATCH 8/8] drm/i915/mtl: MTL PICA hotplug detection   Mika Kahola
• [PATCH 9/9] drm/i915/display/mtl: Fill port width in DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI   Mika Kahola
• [PATCH] drm/i915/adlp: Disable DC5/6 states for TypeC ports   Imre Deak
• [PATCH] drm/i915/mtl: Set has_llc=0   Nirmoy Das
• [PATCH] drm/i915/selftests: add forcewake_with_spinners tests   Andrzej Hajda
• [PATCH] drm/i915: Make IRQ reset and postinstall multi-gt aware   Andi Shyti
• [PATCH] drm/i915: Make IRQ reset and postinstall multi-gt aware   Andi Shyti
• [PATCH] Revert "drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams"   Swati Sharma
• [PATCH] Revert "lockdep: Swap storage for pin_count and references"   Nirmoy Das
• [PATCH i-g-t 0/2] Fix arm and mips container compile error   Kamil Konieczny
• [PATCH i-g-t 0/3] Testcases for dirtyfb ioctl   Jouni Högander
• [PATCH i-g-t 0/3] Testcases for dirtyfb ioctl   Jouni Högander
• [PATCH i-g-t 0/4] Testcases for dirtyfb ioctl   Jouni Högander
• [PATCH i-g-t 0/6] Introduce KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 1/2] tests/i915_pm_freq_api: add missing include   Kamil Konieczny
• [PATCH i-g-t 1/3] tests/i915/kms_frontbuffer_tracking: Split fbc into separate helper   Jouni Högander
• [PATCH i-g-t 1/3] tests/i915/kms_frontbuffer_tracking: Split fbc into separate helper   Jouni Högander
• [PATCH i-g-t 1/4] tests/i915/kms_frontbuffer_tracking: Split fbc into separate helper   Jouni Högander
• [PATCH i-g-t 1/6] lib/igt_kmod: rename kselftest functions to ktest   Dominik Karol Piatkowski
• [PATCH i-g-t 1/6] lib/igt_kmod: rename kselftest functions to ktest   Dominik Karol Piatkowski
• [PATCH i-g-t 1/6] lib/igt_kmod: rename kselftest functions to ktest   Dominik Karol Piatkowski
• [PATCH i-g-t 1/6] lib/igt_kmod: rename kselftest functions to ktest   Dominik Karol Piatkowski
• [PATCH i-g-t 2/2] HAX: run only one vgem test   Kamil Konieczny
• [PATCH i-g-t 2/3] tests/i915/kms_frontbuffer_tracking: Split drrs   Jouni Högander
• [PATCH i-g-t 2/3] tests/i915/kms_frontbuffer_tracking: Split drrs into separate helper   Jouni Högander
• [PATCH i-g-t 2/4] tests/i915/kms_frontbuffer_tracking: Split drrs into separate helper   Jouni Högander
• [PATCH i-g-t 2/6] lib/igt_kmod.c: check if module is builtin before attempting to unload it   Dominik Karol Piatkowski
• [PATCH i-g-t 2/6] lib/igt_kmod.c: check if module is builtin before attempting to unload it   Dominik Karol Piatkowski
• [PATCH i-g-t 2/6] lib/igt_kmod.c: check if module is builtin before attempting to unload it   Dominik Karol Piatkowski
• [PATCH i-g-t 2/6] lib/igt_kmod.c: check if module is builtin before attempting to unload it   Dominik Karol Piatkowski
• [PATCH i-g-t 3/3] tests/kms_dirtyfb: Add new test for dirtyfb ioctl   Jouni Högander
• [PATCH i-g-t 3/3] tests/kms_dirtyfb: Add new test for dirtyfb ioctl   Jouni Högander
• [PATCH i-g-t 3/4] lib/igt_draw: Ensure drawing is complete when draw_rect_render returns   Jouni Högander
• [PATCH i-g-t 3/6] lib/igt_kmod: add compatibility for KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 3/6] lib/igt_kmod: add compatibility for KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 3/6] lib/igt_kmod: add compatibility for KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 3/6] lib/igt_kmod: add compatibility for KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 4/4] tests/kms_dirtyfb: Add new test for dirtyfb ioctl   Jouni Högander
• [PATCH i-g-t 4/6] tests: DRM selftests: switch to KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 4/6] tests: DRM selftests: switch to KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 4/6] tests: DRM selftests: switch to KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 4/6] tests: DRM selftests: switch to KUnit   Dominik Karol Piatkowski
• [PATCH i-g-t 5/6] Change logic of ktap parser to run on a thread   Dominik Karol Piatkowski
• [PATCH i-g-t 5/6] Change logic of ktap parser to run on a thread   Dominik Karol Piatkowski
• [PATCH i-g-t 5/6] Change logic of ktap parser to run on a thread   Dominik Karol Piatkowski
• [PATCH i-g-t 5/6] Change logic of ktap parser to run on a thread   Dominik Karol Piatkowski
• [PATCH i-g-t 6/6] HAX: kUnit testlist   Dominik Karol Piatkowski
• [PATCH i-g-t 6/6] HAX: kUnit testlist   Dominik Karol Piatkowski
• [PATCH i-g-t 6/6] HAX: kUnit testlist   Dominik Karol Piatkowski
• [PATCH i-g-t 6/6] HAX: kUnit testlist   Dominik Karol Piatkowski
• [PATCH v2 0/1] kUnit testing   Dominik Karol Piatkowski
• [PATCH v2 i-g-t 0/6] Introduce KUnit   Dominik Karol Piatkowski
• [PATCH v3 0/1] kUnit testing   Dominik Karol Piatkowski
• [PATCH v3 i-g-t 0/6] Introduce KUnit   Dominik Karol Piatkowski
• [PATCH v4 0/1] kUnit testing   Dominik Karol Piatkowski
• [PATCH v4 i-g-t 0/6] Introduce KUnit   Dominik Karol Piatkowski
• ✓ Fi.CI.BAT: success for drm/i915/adlp: Disable DC5/6 states for TypeC ports   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/mtl: Set has_llc=0   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/selftests: add forcewake_with_spinners tests (rev4)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915/selftests: add forcewake_with_spinners tests (rev5)   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Make IRQ reset and postinstall multi-gt aware   Patchwork
• ✓ Fi.CI.BAT: success for drm/i915: Make IRQ reset and postinstall multi-gt aware (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for Fix arm and mips container compile error   Patchwork
• ✓ Fi.CI.BAT: success for Handle dma fences in dirtyfb ioctl (rev5)   Patchwork
• ✓ Fi.CI.BAT: success for Handle dma fences in dirtyfb ioctl (rev6)   Patchwork
• ✓ Fi.CI.BAT: success for Revert "lockdep: Swap storage for pin_count and references"   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915/mtl: Set has_llc=0   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Use separate "DC off" power well for ADL-P and DG2   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/2] lib/kms: Get pipe enum from debugfs (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/2] tests/kms_vrr: New VRR test to toggle the VRR during fastsets   Patchwork
• ✓ Fi.CI.BAT: success for series starting with [1/5] drm/i915/gem: Add I915_BO_PREALLOC   Patchwork
• ✓ Fi.CI.BAT: success for Testcases for dirtyfb ioctl (rev2)   Patchwork
• ✓ Fi.CI.BAT: success for Testcases for dirtyfb ioctl (rev3)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/adlp: Disable DC5/6 states for TypeC ports   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/mtl: Add C10 phy support   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/mtl: Set has_llc=0   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915/selftests: add forcewake_with_spinners tests (rev5)   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: Make IRQ reset and postinstall multi-gt aware   Patchwork
• ✓ Fi.CI.IGT: success for drm/i915: Make IRQ reset and postinstall multi-gt aware (rev2)   Patchwork
• ✓ Fi.CI.IGT: success for Fix arm and mips container compile error   Patchwork
• ✓ Fi.CI.IGT: success for Handle dma fences in dirtyfb ioctl (rev5)   Patchwork
• ✓ Fi.CI.IGT: success for Handle dma fences in dirtyfb ioctl (rev6)   Patchwork
• ✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915: Use separate "DC off" power well for ADL-P and DG2   Patchwork
• ✓ Fi.CI.IGT: success for series starting with [1/2] lib/kms: Get pipe enum from debugfs (rev2)   Patchwork
• ✓ Fi.CI.IGT: success for series starting with [1/2] tests/kms_vrr: New VRR test to toggle the VRR during fastsets   Patchwork
• ✓ Fi.CI.IGT: success for series starting with [1/5] drm/i915/gem: Add I915_BO_PREALLOC   Patchwork
• ✓ Fi.CI.IGT: success for series starting with [1/5] drm/i915/gem: Add I915_BO_PREALLOC   Patchwork
• ✓ Fi.CI.IGT: success for Testcases for dirtyfb ioctl (rev2)   Patchwork
• ✓ Fi.CI.IGT: success for Testcases for dirtyfb ioctl (rev3)   Patchwork
• ✓ Fi.CI.IGT: success for Update DSC Bigjoiner BW check   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/selftests: add forcewake_with_spinners tests   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/selftests: add forcewake_with_spinners tests (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/selftests: add forcewake_with_spinners tests (rev3)   Patchwork
• ✗ Fi.CI.BAT: failure for drm/i915/selftests: add forcewake_with_spinners tests (rev4)   Patchwork
• ✗ Fi.CI.BAT: failure for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev11)   Patchwork
• ✗ Fi.CI.BAT: failure for Handle dma fences in dirtyfb ioctl   Patchwork
• ✗ Fi.CI.BAT: failure for Handle dma fences in dirtyfb ioctl (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for Handle dma fences in dirtyfb ioctl (rev3)   Patchwork
• ✗ Fi.CI.BAT: failure for Handle dma fences in dirtyfb ioctl (rev4)   Patchwork
• ✗ Fi.CI.BAT: failure for Introduce KUnit   Patchwork
• ✗ Fi.CI.BAT: failure for Introduce KUnit (rev2)   Patchwork
• ✗ Fi.CI.BAT: failure for Introduce KUnit (rev3)   Patchwork
• ✗ Fi.CI.BAT: failure for Introduce KUnit (rev4)   Patchwork
• ✗ Fi.CI.BAT: failure for kUnit testing   Patchwork
• ✗ Fi.CI.BAT: failure for kUnit testing (rev3)   Patchwork
• ✗ Fi.CI.BAT: failure for kUnit testing (rev4)   Patchwork
• ✗ Fi.CI.BAT: failure for Revert "drm/i915/dp_mst: Fix active port PLL selection for secondary MST streams"   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] lib/kms: Get pipe enum from debugfs   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/2] Revert "drm/i915: Explain the magic numbers for AUX SYNC/precharge length"   Patchwork
• ✗ Fi.CI.BAT: failure for series starting with [1/3] drm/i915: Add a function to mmap framebuffer obj   Patchwork
• ✗ Fi.CI.BAT: failure for testplan: Testplan for kms BAT tests   Patchwork
• ✗ Fi.CI.BUILD: failure for Add DSC fractional bpp support (rev4)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/mtl: C10 phy support   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/mtl: C10 phy support (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/mtl: C10 phy support (rev3)   Patchwork
• ✗ Fi.CI.BUILD: failure for drm/i915/mtl: C10 phy testing   Patchwork
• ✗ Fi.CI.IGT: failure for Revert "lockdep: Swap storage for pin_count and references"   Patchwork
• ✗ Fi.CI.IGT: failure for series starting with [1/2] drm/i915/mtl: Set has_llc=0   Patchwork
• ✗ GitLab.Pipeline: warning for Introduce KUnit (rev2)   Patchwork
• ✗ GitLab.Pipeline: warning for Introduce KUnit (rev3)   Patchwork
• ✗ GitLab.Pipeline: warning for Introduce KUnit (rev4)   Patchwork
• ✗ GitLab.Pipeline: warning for testplan: Testplan for kms BAT tests   Patchwork

Last message date: Fri Apr 28 21:41:39 UTC 2023
Archived on: Fri Apr 28 21:41:40 UTC 2023

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...