[PATCH 09/10] drm/i915/vrr/xe2lpd: Use VRR timing generator whenever panel supports VRR

[Ankit Nautiyal]

Currently VRR timing generator is used only when VRR is enabled by
userspace. From XE2LPD, gradually move away from older timing
generator and use VRR timing generator if panel supports VRR but
VRR is not enabled by the userspace.
In such a case, Flipline VMin and VMax all are set to the Vtotal of the
mode, which effectively makes the VRR timing generator work in
fixed refresh rate mode.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
---
 drivers/gpu/drm/i915/display/intel_vrr.c | 47 +++++++++++++++---------
 1 file changed, 30 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
index ae9bea854282..240bfb5633ad 100644
--- a/drivers/gpu/drm/i915/display/intel_vrr.c
+++ b/drivers/gpu/drm/i915/display/intel_vrr.c
@@ -189,33 +189,46 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state,
 	if (HAS_LRR(i915))
 		crtc_state->update_lrr = true;
 
-	vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
-			    adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq);
-	vmax = adjusted_mode->crtc_clock * 1000 /
-		(adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq);
+	if (!crtc_state->uapi.vrr_enabled && DISPLAY_VER(i915) >= 20) {
+		/*
+		 * for LNL+ if panel supports VRR and user has not set VRR,
+		 * always go for fixed average Vtotal mode.
+		 */
+		crtc_state->vrr.vmin = adjusted_mode->crtc_vtotal;
+		crtc_state->vrr.vmax = adjusted_mode->crtc_vtotal;
+		crtc_state->vrr.flipline = adjusted_mode->crtc_vtotal;
+		crtc_state->vrr.fixed_rr = true;
+	} else {
 
-	vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal);
-	vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal);
+		vmin = DIV_ROUND_UP(adjusted_mode->crtc_clock * 1000,
+				    adjusted_mode->crtc_htotal * info->monitor_range.max_vfreq);
+		vmax = adjusted_mode->crtc_clock * 1000 /
+			(adjusted_mode->crtc_htotal * info->monitor_range.min_vfreq);
 
-	if (vmin >= vmax)
-		return;
+		vmin = max_t(int, vmin, adjusted_mode->crtc_vtotal);
+		vmax = max_t(int, vmax, adjusted_mode->crtc_vtotal);
 
-	/*
-	 * flipline determines the min vblank length the hardware will
-	 * generate, and flipline>=vmin+1, hence we reduce vmin by one
-	 * to make sure we can get the actual min vblank length.
-	 */
-	crtc_state->vrr.vmin = vmin - 1;
-	crtc_state->vrr.vmax = vmax;
+		if (vmin >= vmax)
+			return;
 
-	crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
+		/*
+		 * flipline determines the min vblank length the hardware will
+		 * generate, and flipline>=vmin+1, hence we reduce vmin by one
+		 * to make sure we can get the actual min vblank length.
+		 */
+		crtc_state->vrr.vmin = vmin - 1;
+		crtc_state->vrr.vmax = vmax;
+
+		crtc_state->vrr.flipline = crtc_state->vrr.vmin + 1;
+		crtc_state->vrr.fixed_rr = false;
+	}
 
 	/*
 	 * When panel is VRR capable and userspace has
 	 * not enabled adaptive sync mode then Fixed Average
 	 * Vtotal mode should be enabled.
 	 */
-	if (crtc_state->uapi.vrr_enabled) {
+	if (crtc_state->uapi.vrr_enabled || crtc_state->vrr.fixed_rr) {
 		crtc_state->vrr.enable = true;
 		crtc_state->mode_flags |= I915_MODE_FLAG_VRR;
 	} else if (is_cmrr_frac_required(crtc_state) && is_edp) {
-- 
2.40.1