[Intel-gfx] 82845G and xf86-video-intel-2.10.901
Haroldo Stenger
haroldo.stenger at gmail.com
Tue Mar 16 02:35:05 CET 2010
Hi there,
This is the lspci line of the vidoe hardware of a machine I'm having
trouble configuring
[prisma at atahua-ibm ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
DRAM Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
I'm running arch linux with kernel 2.6.32
The machine is an IBM ant the video hardware is embedded at the
motherboard level.
The BIOS setup lets me choose between PCI or AGP mode for the intel video.
The first problem is that when the intel_agp and the i915 kermel
modules are inserted in the boot process, the text console goes "out
of range" in the LCD monitor I'm using. I also tried with another LCD
monitor, and it's the same. I last tried with a CRT monitor and the
problem goes away, it naturally changes to "framebuffer" view.
I was initially working fine with version 2.9 of xf86-video-intel.
I upgraded to 2.10 , and started having problems, and lastly tried
2.10.901, and the problems continue. Please see my dmesg trail:
Linux version 2.6.32-ARCH (tobias at T-POWA-LX) (gcc version 4.4.3 (GCC)
) #1 SMP PREEMPT Tue Feb 23 19:24:08 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable)
BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 000000001f780000 (usable)
BIOS-e820: 000000001f780000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x1f780 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-E3FFF uncachable
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 01FF80000 mask FFFF80000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000001f6f0000 (usable)
modified: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
modified: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
modified: 000000001f700000 - 000000001f780000 (usable)
modified: 000000001f780000 - 0000000020000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff800000 - 00000000ffc00000 (reserved)
modified: 00000000fffffc00 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001f780000
0000000000 - 0000400000 page 4k
0000400000 - 001f400000 page 2M
001f400000 - 001f780000 page 4k
kernel direct mapping tables up to 1f780000 @ 7000-c000
RAMDISK: 1f553000 - 1f6dff0b
ACPI: RSDP 000f6360 00014 (v00 PTLTD )
ACPI: RSDT 1f6f73ec 00034 (v01 PTLTD RSDT 060400D0 LTP 00000000)
ACPI: FACP 1f6faee2 00074 (v01 IBM NETVISTA 060400D0 PTL 00000001)
ACPI: DSDT 1f6f7420 03AC2 (v01 IBM Yelotail 060400D0 MSFT 0100000E)
ACPI: FACS 1f6fbfc0 00040
ACPI: TCPA 1f6faf56 00032 (v01 IBM NETVISTA 060400D0 PTL 00000001)
ACPI: APIC 1f6faf88 00050 (v01 PTLTD ? APIC 060400D0 LTP 00000000)
ACPI: BOOT 1f6fafd8 00028 (v01 PTLTD $SBFTBL$ 060400D0 LTP 00000001)
ACPI: Local APIC address 0xfee00000
0MB HIGHMEM available.
503MB LOWMEM available.
mapped low ram: 0 - 1f780000
low ram: 0 - 1f780000
node 0 low ram: 00000000 - 1f780000
node 0 bootmap 00008000 - 0000bef0
(9 early reservations) ==> bootmem [0000000000 - 001f780000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000152f024] TEXT DATA BSS ==> [0001000000 - 000152f024]
#4 [001f553000 - 001f6dff0b] RAMDISK ==> [001f553000 - 001f6dff0b]
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#6 [0001530000 - 00015360d8] BRK ==> [0001530000 - 00015360d8]
#7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000]
found SMP MP-table at [c00f62d0] f62d0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001f780
HighMem 0x0001f780 -> 0x0001f780
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0001f6f0
0: 0x0001f700 -> 0x0001f780
On node 0 totalpages: 128779
free_area_init_node: node 0, pgdat c13dbe40, node_mem_map c1538000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 975 pages used for memmap
Normal zone: 123809 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000001f6f0000 - 000000001f6fb000
PM: Registered nosave memory: 000000001f6fb000 - 000000001f700000
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34680 r0 d22664 u4194304
pcpu-alloc: s34680 r0 d22664 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127772
Kernel command line:
root=/dev/disk/by-uuid/0adf8f68-b0d8-4dca-9dee-a18566428d58 ro
video="DAC-5:1024x768 at 72"
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 503244k/515584k available (2796k kernel code, 11460k reserved,
1185k data, 412k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdff80000 - 0xff7fe000 ( 504 MB)
lowmem : 0xc0000000 - 0xdf780000 ( 503 MB)
.init : 0xc13e4000 - 0xc144b000 ( 412 kB)
.data : 0xc12bb1da - 0xc13e39c8 (1185 kB)
.text : 0xc1000000 - 0xc12bb1da (2796 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2259.014 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4519.27 BogoMIPS (lpj=7530046)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090903
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 04
APIC calibration not consistent with PM-Timer: 96ms instead of 100ms
APIC delta adjusted to PM-Timer: 830564 (802830)
Brought up 1 CPUs
Total of 1 processors activated (4519.27 BogoMIPS).
CPU0 attaching NULL sched-domain.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0x88000000-0x8fffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0x80000000-0x8007ffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0080000-0xc00803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0080c00-0xc0080dff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0080800-0xc00808ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:02:08.0: reg 10 32bit mmio: [0xc0100000-0xc0100fff]
pci 0000:02:08.0: reg 14 io port: [0x2000-0x203f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0xfe00-0xfe00 has been reserved
system 00:01: ioport range 0x800-0x87f has been reserved
system 00:01: ioport range 0x1000-0x107f has been reserved
system 00:01: ioport range 0x1100-0x111f has been reserved
system 00:01: ioport range 0x1180-0x11bf has been reserved
system 00:01: iomem range 0xeffffc00-0xefffffff has been reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xc0100000-0xc01fffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
Unpacking initramfs...
Freeing initrd memory: 1587k freed
Simple Boot Flag at 0x6c set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1268702707.326:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 986
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PSM] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata2.00: ATAPI: HL-DT-ST CD-ROM GCR-8480B, 1.02, max UDMA/33
ata1.00: ATA-5: IC35L040AVVN07-0, VA2OAF1A, max UDMA/100
ata1.00: 78156288 sectors, multi 16: LBA
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA IC35L040AVVN07-0 VA2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8480B 1.02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78156288 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda:sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
udev: starting version 151
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input2
psmouse serio1: ID: 10 00 64
lp: driver loaded but no devices found
input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001).
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (46 C)
processor LNXCPU:00: registered as cooling_device0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc0080000
ppdev: user-space parallel port driver
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
iTCO_vendor_support: vendor-support=0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: detected 8060K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0x88000000
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ACPI: I/O resource 0000:00:1f.3 [0x1880-0x189f] conflicts with ACPI
region SMBR [0x1880-0x1887]
ACPI: If an ACPI driver is available for this device, you should use
it instead of the native driver
lp0: using parport0 (interrupt-driven).
[drm] Initialized drm 1.1.0 20060810
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 15M of stolen space
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xc0100000, irq 20, MAC addr 00:09:6b:62:4f:9f
[drm:edid_is_valid] *ERROR* Raw EDID:
<3>00 a0 00 00 00 00 00 00 00 ac 55 51 54 43 57 48 ..........UQTCWH
<3>1b 09 01 01 2e 21 18 96 e8 0d c9 a0 57 47 98 27 .....!......WG.'
<3>12 48 4c a5 4b 00 31 59 45 59 61 59 a9 45 01 01 .HL.K.1YEYaY.E..
<3>01 01 01 01 01 01 10 0b d0 b4 20 5e 63 10 12 6c .......... ^c..l
<3>62 08 fa b8 00 00 00 1a 00 00 00 ff 00 35 35 33 b............553
<3>34 31 43 48 57 43 54 36 39 0a 00 00 00 fc 00 44 41CHWCT69......D
<3>45 4c 4c 20 44 31 30 32 35 54 4d 0a 00 00 00 fd ELL D1025TM.....
<3>00 32 78 1e 55 ff 00 0a 20 20 20 20 20 20 00 14 .2x.U... ..
i915 0000:00:02.0: VGA-1: EDID invalid.
[drm] DAC-5: set mode 800x600 13
Console: switching to colour frame buffer device 100x37
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50624 usecs (2440 samples)
intel8x0: clocking to 48000
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
e100: eth0 NIC Link is Up 100 Mbps Full Duplex
---------
How can I fix it ? Do I have to downgrade again ?
Xorg now fails (but that follows from the errors in dmesg, I believe).
thank you very much
regards
haroldo
More information about the Intel-gfx
mailing list