[Intel-gfx] [PATCH intel-gpu-tools] tools: Added intel_dpio_read and intel_dpio_write
Ben Widawsky
ben at bwidawsk.net
Mon Aug 6 23:26:19 CEST 2012
On Mon, 6 Aug 2012 13:10:33 +0530
Vijay Purushothaman <vijay.a.purushothaman at intel.com> wrote:
> On Thu, 2 Aug 2012 09:06:48 -0700
> Ben Widawsky <ben at bwidawsk.net> wrote:
>
> > On 2012-08-02 05:07, Vijay Purushothaman wrote:
> > > In Valleyview the DPLL and lane control registers are accessible
> > > only through side band fabric called DPIO. Added two tools to read
> > > and write
> > > registers residing in this space.
> >
> > Could I convince you to use the centralized read/write mmio functions?
> > Otherwise, everything seems fine to me here.
> >
> Sure. I will move these read, write functions to intel_reg_read &
> intel_reg_write.
>
> Thanks,
> Vijay
Actually, I didn't mind them being a separate application (and I agree
read and write should be separated). I just wanted the DPIO
functionality in the core functions, ie. in i-g-t/lib/whatever.
>
> > >
> > > Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
> > > ---
> > > tools/Makefile.am | 2 +
> > > tools/intel_dpio_read.c | 105
> > > ++++++++++++++++++++++++++++++++++++++++++++++
> > > tools/intel_dpio_write.c | 103
> > > +++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 210 insertions(+)
> > > create mode 100644 tools/intel_dpio_read.c
> > > create mode 100644 tools/intel_dpio_write.c
> > >
> > > diff --git a/tools/Makefile.am b/tools/Makefile.am
> > > index d461f38..71fb087 100644
> > > --- a/tools/Makefile.am
> > > +++ b/tools/Makefile.am
> > > @@ -15,6 +15,8 @@ bin_PROGRAMS = \
> > > intel_reg_write \
> > > intel_reg_read \
> > > intel_forcewaked \
> > > + intel_dpio_read \
> > > + intel_dpio_write \
> > > intel_l3_parity
> > >
> > > noinst_PROGRAMS = \
> > > diff --git a/tools/intel_dpio_read.c b/tools/intel_dpio_read.c
> > > new file mode 100644
> > > index 0000000..8b924fd
> > > --- /dev/null
> > > +++ b/tools/intel_dpio_read.c
> > > @@ -0,0 +1,105 @@
> > > +/*
> > > + * Copyright © 2012 Intel Corporation
> > > + *
> > > + * Permission is hereby granted, free of charge, to any person
> > > obtaining a
> > > + * copy of this software and associated documentation files (the
> > > "Software"),
> > > + * to deal in the Software without restriction, including without
> > > limitation
> > > + * the rights to use, copy, modify, merge, publish, distribute,
> > > sublicense,
> > > + * and/or sell copies of the Software, and to permit persons to
> > > whom the
> > > + * Software is furnished to do so, subject to the following
> > > conditions:
> > > + *
> > > + * The above copyright notice and this permission notice
> > > (including the next
> > > + * paragraph) shall be included in all copies or substantial
> > > portions of the
> > > + * Software.
> > > + *
> > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > > EXPRESS OR
> > > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > > MERCHANTABILITY,
> > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> > > EVENT SHALL
> > > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> > > DAMAGES OR OTHER
> > > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> > > ARISING
> > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > > OTHER
> > > + * DEALINGS IN THE SOFTWARE.
> > > + *
> > > + * Authors:
> > > + * Vijay Purushothaman
> > > <vijay.a.purushothaman at intel.com>
> > > + *
> > > + */
> > > +
> > > +#include <unistd.h>
> > > +#include <stdlib.h>
> > > +#include <stdio.h>
> > > +#include <err.h>
> > > +#include <string.h>
> > > +#include "intel_gpu_tools.h"
> > > +
> > > +#define VLV_DISPLAY_BASE 0x180000
> > > +#define DPIO_PKT 0x2100
> > > +#define DPIO_RID (0 << 24)
> > > +#define DPIO_OP_WRITE (1 << 16)
> > > +#define DPIO_OP_READ (0 << 16)
> > > +#define DPIO_PORTID (0x12 << 8)
> > > +#define DPIO_BYTE (0xf << 4)
> > > +#define DPIO_BUSY (1 << 0)
> > > +#define DPIO_DATA 0x2104
> > > +#define DPIO_REG 0x2108
> > > +
> > > +static uint32_t vlv_display_reg_read(uint32_t reg)
> > > +{
> > > + reg += VLV_DISPLAY_BASE;
> > > + return (*(volatile uint32_t *)((volatile char*)mmio +
> > > reg)); +}
> > > +
> > > +static void vlv_display_reg_write(uint32_t reg, uint32_t val)
> > > +{
> > > + volatile uint32_t *ptr;
> > > +
> > > + reg += VLV_DISPLAY_BASE;
> > > + ptr = (volatile uint32_t *)((volatile char *) mmio + reg);
> > > + *ptr = val;
> > > +}
> > > +
> > > +static void usage(char *cmdname)
> > > +{
> > > + printf("Warning : This program will work only on
> > > Valleyview\n");
> > > + printf("Usage: %s [addr]\n", cmdname);
> > > + printf("\t addr : in 0xXXXX format\n");
> > > +}
> > > +
> > > +int main(int argc, char** argv)
> > > +{
> > > + int ret = 0;
> > > + uint32_t reg, val;
> > > + char *cmdname = strdup(argv[0]);
> > > +
> > > + if (argc != 2) {
> > > + usage(cmdname);
> > > + ret = 1;
> > > + goto out;
> > > + }
> > > +
> > > + sscanf(argv[1], "0x%x", ®);
> > > +
> > > + intel_register_access_init(intel_get_pci_device(), 0);
> > > +
> > > + /* Check whether the side band fabric is ready to accept
> > > commands */
> > > + do {
> > > + usleep(1);
> > > + } while (vlv_display_reg_read(DPIO_PKT) & DPIO_BUSY);
> > > +
> > > + vlv_display_reg_write(DPIO_REG, reg);
> > > + vlv_display_reg_write(DPIO_PKT, DPIO_RID | DPIO_OP_READ |
> > > DPIO_PORTID |
> > > + DPIO_BYTE);
> > > + do {
> > > + usleep(1);
> > > + } while (vlv_display_reg_read(DPIO_PKT) & DPIO_BUSY);
> > > +
> > > + val = vlv_display_reg_read(DPIO_DATA);
> > > +
> > > + printf("Read DPIO register: 0x%x - Value : 0x%x\n", reg,
> > > val); +
> > > + intel_register_access_fini();
> > > +
> > > +out:
> > > + free(cmdname);
> > > + return ret;
> > > +}
> > > diff --git a/tools/intel_dpio_write.c b/tools/intel_dpio_write.c
> > > new file mode 100644
> > > index 0000000..96b72dd
> > > --- /dev/null
> > > +++ b/tools/intel_dpio_write.c
> > > @@ -0,0 +1,103 @@
> > > +/*
> > > + * Copyright © 2012 Intel Corporation
> > > + *
> > > + * Permission is hereby granted, free of charge, to any person
> > > obtaining a
> > > + * copy of this software and associated documentation files (the
> > > "Software"),
> > > + * to deal in the Software without restriction, including without
> > > limitation
> > > + * the rights to use, copy, modify, merge, publish, distribute,
> > > sublicense,
> > > + * and/or sell copies of the Software, and to permit persons to
> > > whom the
> > > + * Software is furnished to do so, subject to the following
> > > conditions:
> > > + *
> > > + * The above copyright notice and this permission notice
> > > (including the next
> > > + * paragraph) shall be included in all copies or substantial
> > > portions of the
> > > + * Software.
> > > + *
> > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > > EXPRESS OR
> > > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > > MERCHANTABILITY,
> > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> > > EVENT SHALL
> > > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> > > DAMAGES OR OTHER
> > > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> > > ARISING
> > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > > OTHER
> > > + * DEALINGS IN THE SOFTWARE.
> > > + *
> > > + * Authors:
> > > + * Vijay Purushothaman
> > > <vijay.a.purushothaman at intel.com>
> > > + *
> > > + */
> > > +
> > > +#include <unistd.h>
> > > +#include <stdlib.h>
> > > +#include <stdio.h>
> > > +#include <err.h>
> > > +#include <string.h>
> > > +#include "intel_gpu_tools.h"
> > > +
> > > +#define VLV_DISPLAY_BASE 0x180000
> > > +#define DPIO_PKT 0x2100
> > > +#define DPIO_RID (0 << 24)
> > > +#define DPIO_OP_WRITE (1 << 16)
> > > +#define DPIO_OP_READ (0 << 16)
> > > +#define DPIO_PORTID (0x12 << 8)
> > > +#define DPIO_BYTE (0xf << 4)
> > > +#define DPIO_BUSY (1 << 0)
> > > +#define DPIO_DATA 0x2104
> > > +#define DPIO_REG 0x2108
> > > +
> > > +static uint32_t vlv_display_reg_read(uint32_t reg)
> > > +{
> > > + reg += VLV_DISPLAY_BASE;
> > > + return (*(volatile uint32_t *)((volatile char*)mmio +
> > > reg)); +}
> > > +
> > > +static void vlv_display_reg_write(uint32_t reg, uint32_t val)
> > > +{
> > > + volatile uint32_t *ptr;
> > > +
> > > + reg += VLV_DISPLAY_BASE;
> > > + ptr = (volatile uint32_t *)((volatile char *) mmio + reg);
> > > + *ptr = val;
> > > +}
> > > +
> > > +static void usage(char *cmdname)
> > > +{
> > > + printf("Warning : This program will work only on
> > > Valleyview\n");
> > > + printf("Usage: %s [addr] [val]\n", cmdname);
> > > + printf("\t addr : in 0xXXXX format\n");
> > > +}
> > > +
> > > +int main(int argc, char** argv)
> > > +{
> > > + int ret = 0;
> > > + uint32_t reg, val;
> > > + char *cmdname = strdup(argv[0]);
> > > +
> > > + if (argc != 3) {
> > > + usage(cmdname);
> > > + ret = 1;
> > > + goto out;
> > > + }
> > > +
> > > + sscanf(argv[1], "0x%x", ®);
> > > + sscanf(argv[2], "0x%x", &val);
> > > +
> > > + intel_register_access_init(intel_get_pci_device(), 0);
> > > +
> > > + /* Check whether the side band fabric is ready to accept
> > > commands */
> > > + do {
> > > + usleep(1);
> > > + } while (vlv_display_reg_read(DPIO_PKT) & DPIO_BUSY);
> > > +
> > > + vlv_display_reg_write(DPIO_DATA, val);
> > > + vlv_display_reg_write(DPIO_REG, reg);
> > > + vlv_display_reg_write(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE |
> > > DPIO_PORTID |
> > > + DPIO_BYTE);
> > > + do {
> > > + usleep(1);
> > > + } while (vlv_display_reg_read(DPIO_PKT) & DPIO_BUSY);
> > > +
> > > + intel_register_access_fini();
> > > +
> > > +out:
> > > + free(cmdname);
> > > + return ret;
> > > +}
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ben Widawsky, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list