[Intel-gfx] [PATCH] drm/i915: use the correct encoder type when comparing

Jani Nikula jani.nikula at linux.intel.com
Fri Aug 10 15:27:23 CEST 2012


On Fri, 10 Aug 2012, Paulo Zanoni <przanoni at gmail.com> wrote:
> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
>   - intel_encoder->type is INTEL_OUTPUT_SOMETHING
>   - drm_encoder->encoder_type is DRM_MODE_ENCODER_SOMETHING
>
> Here we're using intel_encoder, so compare the oranges against
> oranges. While at it, rename the variable to "intel_encoder" so we
> keep our naming standards used everywhere.

intel_display.c still has plenty of 'struct intel_encoder *encoder'...

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> Luckily this was not a bug because both DRM_MODE_ENCODER_DAC and
> INTEL_OUTPUT_ANALOG are defined as 1. This is the only case where the
> drm definition matches the intel definition.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
>
> This was not tested, just compiled :)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 2e1f28f..ea19a72 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -2837,13 +2837,13 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
>  static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
>  {
>  	struct drm_device *dev = crtc->dev;
> -	struct intel_encoder *encoder;
> +	struct intel_encoder *intel_encoder;
>  
>  	/*
>  	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
>  	 * must be driven by its own crtc; no sharing is possible.
>  	 */
> -	for_each_encoder_on_crtc(dev, crtc, encoder) {
> +	for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
>  
>  		/* On Haswell, LPT PCH handles the VGA connection via FDI, and Haswell
>  		 * CPU handles all others */
> @@ -2851,19 +2851,19 @@ static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
>  			/* It is still unclear how this will work on PPT, so throw up a warning */
>  			WARN_ON(!HAS_PCH_LPT(dev));
>  
> -			if (encoder->type == DRM_MODE_ENCODER_DAC) {
> +			if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
>  				DRM_DEBUG_KMS("Haswell detected DAC encoder, assuming is PCH\n");
>  				return true;
>  			} else {
>  				DRM_DEBUG_KMS("Haswell detected encoder %d, assuming is CPU\n",
> -						encoder->type);
> +					      intel_encoder->type);
>  				return false;
>  			}
>  		}
>  
> -		switch (encoder->type) {
> +		switch (intel_encoder->type) {
>  		case INTEL_OUTPUT_EDP:
> -			if (!intel_encoder_is_pch_edp(&encoder->base))
> +			if (!intel_encoder_is_pch_edp(&intel_encoder->base))
>  				return false;
>  			continue;
>  		}
> -- 
> 1.7.11.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



More information about the Intel-gfx mailing list