[Intel-gfx] [PATCH 00/58] modeset-rework, the basic conversion

[Lespiau, Damien]

On Wed, Aug 22, 2012 at 12:03 PM, Lespiau, Damien
<damien.lespiau at intel.com> wrote:
> On Wed, Aug 22, 2012 at 11:46 AM, Lespiau, Damien
> <damien.lespiau at intel.com> wrote:
>> On Tue, Aug 21, 2012 at 7:11 PM, Daniel Vetter <daniel at ffwll.ch> wrote:
>>>> Smoke-tested the new modeset-rework branch and found a regression on
>>>> my IVB with a pristine f17 userland:
>>>>
>>>> * start with LVDS + VGA
>>>> * unplug VGA
>>>> * LVDS goes black
>>>
>>> Hm, not yet seen this one here. Can you attach a full dmesg with
>>> drm.debug=0xe when this is happening, please?

Adding more information to track this regression, a diff between the
failure state and bringing back the panel with a off/on cycle (note
the disabled DPLL).

$ diff -u vga-out-lvds-fail.dump vga-out-lvds-off-on.dump
--- vga-out-lvds-fail.dump      2012-08-22 14:05:44.732293487 +0100
+++ vga-out-lvds-off-on.dump    2012-08-22 14:06:21.690275915 +0100
@@ -28,10 +28,10 @@
                  PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
                  PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
                  PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
-                      DSPACNTR: 0x58004400 (disabled)
+                      DSPACNTR: 0xd8004400 (enabled)
                       DSPABASE: 0x00000000
                     DSPASTRIDE: 0x00001600 (88)
-                      DSPASURF: 0x041c6008
+                      DSPASURF: 0x0155c008
                    DSPATILEOFF: 0x00000000 (0, 0)
                      PIPEBCONF: 0x00000000 (disabled, inactive,
pf-pd, rotate 0, 8bpc)
                       HTOTAL_B: 0x0897077f (1920 active, 2200 total)
@@ -102,7 +102,7 @@
             PCH_SSC4_AUX_PARMS: 0x000029c5
                   PCH_DPLL_SEL: 0x00000008 (TransA DPLL enable (DPLL
A), TransB DPLL disable (DPLL (null)))
            PCH_DPLL_ANALOG_CTL: 0x00008000
-                    PCH_DPLL_A: 0x08046004 (disable, sdvo high speed
no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi
mul 1)
+                    PCH_DPLL_A: 0x88046004 (enable, sdvo high speed
no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi
mul 1)
                     PCH_DPLL_B: 0x04020002 (disable, sdvo high speed
no, mode (null), p2 (null), FPA0 P1 2, FPA1 P1 2, refclk default
120Mhz, sdvo/hdmi mul 1)
                       PCH_FPA0: 0x00021108 (n = 2, m1 = 17, m2 = 8)
                       PCH_FPA1: 0x00021108 (n = 2, m1 = 17, m2 = 8)