[Intel-gfx] [PATCH 00/58] modeset-rework, the basic conversion

[Daniel Vetter]

On Wed, Aug 22, 2012 at 08:13:37PM +0100, Lespiau, Damien wrote:
> On Wed, Aug 22, 2012 at 12:03 PM, Lespiau, Damien
> <damien.lespiau at intel.com> wrote:
> > On Wed, Aug 22, 2012 at 11:46 AM, Lespiau, Damien
> > <damien.lespiau at intel.com> wrote:
> >> On Tue, Aug 21, 2012 at 7:11 PM, Daniel Vetter <daniel at ffwll.ch> wrote:
> >>>> Smoke-tested the new modeset-rework branch and found a regression on
> >>>> my IVB with a pristine f17 userland:
> >>>>
> >>>> * start with LVDS + VGA
> >>>> * unplug VGA
> >>>> * LVDS goes black
> >>>
> >>> Hm, not yet seen this one here. Can you attach a full dmesg with
> >>> drm.debug=0xe when this is happening, please?
> 
> Adding more information to track this regression, a diff between the
> failure state and bringing back the panel with a off/on cycle (note
> the disabled DPLL).

Please test the for-damien branch in my personal fdo git repo. I'm rather
positive that the patch there should fix this (but in the least it should
unearth the real culprit).
-Daniel

> 
> $ diff -u vga-out-lvds-fail.dump vga-out-lvds-off-on.dump
> --- vga-out-lvds-fail.dump      2012-08-22 14:05:44.732293487 +0100
> +++ vga-out-lvds-off-on.dump    2012-08-22 14:06:21.690275915 +0100
> @@ -28,10 +28,10 @@
>                   PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
>                   PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
>                   PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
> -                      DSPACNTR: 0x58004400 (disabled)
> +                      DSPACNTR: 0xd8004400 (enabled)
>                        DSPABASE: 0x00000000
>                      DSPASTRIDE: 0x00001600 (88)
> -                      DSPASURF: 0x041c6008
> +                      DSPASURF: 0x0155c008
>                     DSPATILEOFF: 0x00000000 (0, 0)
>                       PIPEBCONF: 0x00000000 (disabled, inactive,
> pf-pd, rotate 0, 8bpc)
>                        HTOTAL_B: 0x0897077f (1920 active, 2200 total)
> @@ -102,7 +102,7 @@
>              PCH_SSC4_AUX_PARMS: 0x000029c5
>                    PCH_DPLL_SEL: 0x00000008 (TransA DPLL enable (DPLL
> A), TransB DPLL disable (DPLL (null)))
>             PCH_DPLL_ANALOG_CTL: 0x00008000
> -                    PCH_DPLL_A: 0x08046004 (disable, sdvo high speed
> no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi
> mul 1)
> +                    PCH_DPLL_A: 0x88046004 (enable, sdvo high speed
> no, mode LVDS, p2 Div 14, FPA0 P1 3, FPA1 P1 3, refclk SSC, sdvo/hdmi
> mul 1)
>                      PCH_DPLL_B: 0x04020002 (disable, sdvo high speed
> no, mode (null), p2 (null), FPA0 P1 2, FPA1 P1 2, refclk default
> 120Mhz, sdvo/hdmi mul 1)
>                        PCH_FPA0: 0x00021108 (n = 2, m1 = 17, m2 = 8)
>                        PCH_FPA1: 0x00021108 (n = 2, m1 = 17, m2 = 8)

-- 
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48