[Intel-gfx] Interlaced mode on intel Clarkdale only colored stripes

[Rodrigo Vivi]

The git repo is right, but are you sure you are using the
remotes/origin/interlaced branch?

It is strange that you couldn't see any interlace mode without using
the handmade modeline.

On Mon, Feb 13, 2012 at 4:44 PM, Atechsystem <Atechsystem at freenet.de> wrote:
>
>
> -----Ursprüngliche Nachricht-----
> Von: Atechsystem [mailto:Atechsystem at freenet.de]
> Gesendet: Montag, 13. Februar 2012 19:44
> An: 'Paulo Zanoni'
> Betreff: AW: [Intel-gfx] Interlaced mode on intel Clarkdale only colored
> stripes
>
> Hi,
>
> thanks for your quick reply.
>
>>Paulo Zanoni [mailto:przanoni at gmail.com] Which git repo and which
>>branch exactly? You may have a repo without the patches that fix interlaced
> modes.
>
> I compiled it from here: git://people.freedesktop.org/~danvet/drm
>
>>Which line did you add to xorg.conf? What exactly did you do in this
>>step? Please try to remove every xorg configuration file and test again
>>with the default configuration
>
> I added for example:
> Modeline    "1920x1080 at 50i"     74.25 1920 2448 2492 2640 1080 1084 1094
> 1124 interlace +hsync +vsync
>
> Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, 30Hz,
> 25Hz and 24Hz.
>
>>Please attach the TV, then run "xrandr --verbose" and send us the output.
> Please also send the output of intel_reg_dumper:
>>http://intellinuxgraphics.org/intel_reg_dumper.html
>
> Please find files attached.
>
> -----Ursprüngliche Nachricht-----
> Von: Paulo Zanoni [mailto:przanoni at gmail.com]
> Gesendet: Montag, 13. Februar 2012 18:58
> An: Atechsystem
> Cc: daniel at ffwll.ch; intel-gfx at lists.freedesktop.org
> Betreff: Re: [Intel-gfx] Interlaced mode on intel Clarkdale only colored
> stripes
>
> Hi
>
> 2012/2/13 Atechsystem <Atechsystem at freenet.de>:
>> I compiled the kernel from your git repro to test interlaced output
>> with my Clarkdale (H55) Chipset.
>
> Which git repo and which branch exactly? You may have a repo without the
> patches that fix interlaced modes.
>
>> After installing and reboot I put the interlaced line to my xorg.conf
>> and activate them (first by xorg.conf and after that by lxdm
>> resolution set tool).
>
> Which line did you add to xorg.conf? What exactly did you do in this step?
> Please try to remove every xorg configuration file and test again with the
> default configuration
>
>>
>> I only get a screen full of colored stripes after switching from
>> progressive to interlaced mode.  My  TV shows 1080i as input mode.
>> After that I read all mode lines from my TV by using the xorg server
>> log and tried every interlaced modeline I found but always the same
>> striped screen. To get sure that I use correct modelines I checked
>> them with an plugged in card from another brand and it works immediately.
>
> Please attach the TV, then run "xrandr --verbose" and send us the output.
> Please also send the output of intel_reg_dumper:
> http://intellinuxgraphics.org/intel_reg_dumper.html
>
> --
> Paulo Zanoni
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>



-- 
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
GPG: 0x905BE242 @ wwwkeys.pgp.net