[Intel-gfx] i915 problem with DVI to HDMI adapter: crazy colors
Dan Callahan
dan.callahan at gmail.com
Mon Jul 9 01:33:14 CEST 2012
Hi all,
I'm running Debian Wheezy (testing) on an Asus Eee Box B202 nettop which
has an Intel 945GME chip and a DVI-I output.
I'm trying to connect it to a Panasonic Viera TC-L42E50 HDTV via a
DVI-to-HDMI adapter. The resolution and rendering acceleration all seem
to be working fine, but the colors are very wrong: Black appears green,
and white appears pink.
This only happens when KMS kicks in and I'm going from DVI to HDMI.
During POST and at the GRUB selection screen, everything looks great.
Things also look fine over a DVI to VGA adapter, or when KMS is
disabled via i915.modeset=0. For photos, check out http://imgur.com/a/sVAx7
I'm using Debian's stock 3.2.0-2-686-pae i686 kernel. A slightly similar
issue was reported at http://bugs.debian.org/607529 and in an old thread
here:
http://lists.freedesktop.org/archives/intel-gfx/2010-October/008315.html
Alas, the patches mentioned in the above threads appear to have made it
into the upstream kernel without resolving the issue on my hardware.
I've attached the output of dmesg when booting with drm.debug=0x0e to
this message. Please let me know if I can provide other information or
be of further help. I'm all set up to recompile the i915 module, so I'm
happy to test patches.
Thank you,
-Dan Callahan
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.20-1) (debian-kernel at lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 18:27:04 UTC 2012
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer B202/P5LD2EB-DHS, BIOS 0303 06/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 183f000-1a00000
[ 0.000000] RAMDISK: 36c18000 - 37604000
[ 0.000000] ACPI: RSDP 000fbb80 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7f7a0000 00038 (v01 A_M_I_ OEMRSDT 06000805 MSFT 00000097)
[ 0.000000] ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 06000805 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000820/0x0 (20110623/tbfadt-560)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 0, using default 8 (20110623/tbfadt-610)
[ 0.000000] ACPI: DSDT 7f7a05b0 04727 (v01 A0990 A0990000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 7f7ae000 00040
[ 0.000000] ACPI: APIC 7f7a0390 0005C (v01 A_M_I_ OEMAPIC 06000805 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f7a03f0 0003C (v01 A_M_I_ OEMMCFG 06000805 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f7ae040 00061 (v01 A_M_I_ AMI_OEM 06000805 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f7a4ce0 00038 (v01 A_M_I_ OEMHPET 06000805 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1149MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522031
[ 0.000000] free_area_init_node: node 0, pgdat c1411d80, node_mem_map f5c28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2300 pages used for memmap
[ 0.000000] HighMem zone: 292006 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79d5000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=/dev/mapper/minion-root ro drm.debug=0x0e
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f7a0)
[ 0.000000] Memory: 2053728k/2088576k available (2845k kernel code, 34396k reserved, 1352k data, 416k init, 1177224k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c75ec - 0xc1419640 (1352 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c75ec (2845 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1607.960 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3215.92 BogoMIPS (lpj=6431840)
[ 0.004161] pid_max: default: 32768 minimum: 301
[ 0.004330] Security Framework initialized
[ 0.008014] AppArmor: AppArmor disabled by boot time parameter
[ 0.008134] Mount-cache hash table entries: 512
[ 0.008470] Initializing cgroup subsys cpuacct
[ 0.008556] Initializing cgroup subsys memory
[ 0.008645] Initializing cgroup subsys devices
[ 0.008723] Initializing cgroup subsys freezer
[ 0.008798] Initializing cgroup subsys net_cls
[ 0.008876] Initializing cgroup subsys blkio
[ 0.008961] Initializing cgroup subsys perf_event
[ 0.009088] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.009170] Disabled fast string operations
[ 0.009249] CPU: Physical Processor ID: 0
[ 0.009322] CPU: Processor Core ID: 0
[ 0.009397] mce: CPU supports 5 MCE banks
[ 0.009480] CPU0: Thermal monitoring enabled (TM2)
[ 0.009559] using mwait in idle threads.
[ 0.010225] ACPI: Core revision 20110623
[ 0.016122] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059762] CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
[ 0.060003] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
[ 0.060003] APIC delta adjusted to PM-Timer: 837498 (971487)
[ 0.060003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.060003] ... version: 3
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f58b4000 soft=f58b6000
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] Disabled fast string operations
[ 0.152077] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152442] Brought up 2 CPUs
[ 0.152520] Total of 2 processors activated (6431.86 BogoMIPS).
[ 0.153202] devtmpfs: initialized
[ 0.153202] PM: Registering ACPI NVS region at 7f7ae000 (270336 bytes)
[ 0.153202] print_constraints: dummy:
[ 0.153202] NET: Registered protocol family 16
[ 0.153202] ACPI: bus type pci registered
[ 0.153335] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153443] PCI: not using MMCONFIG
[ 0.153765] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.156029] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.156112] PCI: Using configuration type 1 for base access
[ 0.157693] bio: create slab <bio-0> at 0
[ 0.157693] ACPI: Added _OSI(Module Device)
[ 0.157693] ACPI: Added _OSI(Processor Device)
[ 0.157693] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.157693] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.160453] ACPI: EC: Look up EC in DSDT
[ 0.162496] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.168394] ACPI: Interpreter enabled
[ 0.168482] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.168831] ACPI: Using IOAPIC for interrupt routing
[ 0.168974] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172905] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.173015] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[ 0.173121] PCI: Using MMCONFIG for extended config space
[ 0.196080] ACPI: No dock devices found.
[ 0.196161] HEST: Table not found.
[ 0.196241] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.196535] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.197017] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.197102] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.197185] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.197288] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.197389] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xffffffff]
[ 0.197519] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.197593] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.197611] pci 0000:00:02.0: reg 10: [mem 0xfeb80000-0xfebfffff]
[ 0.197622] pci 0000:00:02.0: reg 14: [io 0xec80-0xec87]
[ 0.197634] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.197645] pci 0000:00:02.0: reg 1c: [mem 0xfeb40000-0xfeb7ffff]
[ 0.197708] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.197724] pci 0000:00:02.1: reg 10: [mem 0xfea80000-0xfeafffff]
[ 0.197854] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.197884] pci 0000:00:1b.0: reg 10: [mem 0xfeb38000-0xfeb3bfff 64bit]
[ 0.198004] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.198014] pci 0000:00:1b.0: PME# disabled
[ 0.198059] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.198184] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.198193] pci 0000:00:1c.0: PME# disabled
[ 0.198237] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.198362] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.198371] pci 0000:00:1c.1: PME# disabled
[ 0.198420] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.198546] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.198555] pci 0000:00:1c.2: PME# disabled
[ 0.198600] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.198665] pci 0000:00:1d.0: reg 20: [io 0xe480-0xe49f]
[ 0.198724] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.198789] pci 0000:00:1d.1: reg 20: [io 0xe800-0xe81f]
[ 0.198845] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.198910] pci 0000:00:1d.2: reg 20: [io 0xe880-0xe89f]
[ 0.198967] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.199032] pci 0000:00:1d.3: reg 20: [io 0xec00-0xec1f]
[ 0.199101] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.199131] pci 0000:00:1d.7: reg 10: [mem 0xfeb3fc00-0xfeb3ffff]
[ 0.199251] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.199261] pci 0000:00:1d.7: PME# disabled
[ 0.199296] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.199411] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.199543] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.199647] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.199750] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
[ 0.199928] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.199957] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.199974] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.199991] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.200022] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.200040] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf]
[ 0.200106] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.200115] pci 0000:00:1f.2: PME# disabled
[ 0.200143] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.200225] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.200385] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.200415] pci 0000:04:00.0: reg 10: [io 0xdc00-0xdcff]
[ 0.200461] pci 0000:04:00.0: reg 18: [mem 0xfe8ff000-0xfe8fffff 64bit]
[ 0.200492] pci 0000:04:00.0: reg 20: [mem 0xbfef0000-0xbfefffff 64bit pref]
[ 0.200514] pci 0000:04:00.0: reg 30: [mem 0xfe8c0000-0xfe8dffff pref]
[ 0.200616] pci 0000:04:00.0: supports D1 D2
[ 0.200622] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.200632] pci 0000:04:00.0: PME# disabled
[ 0.208049] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.208135] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.208145] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.208158] pci 0000:00:1c.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref]
[ 0.208264] pci 0000:03:00.0: [1814:0781] type 0 class 0x000280
[ 0.208294] pci 0000:03:00.0: reg 10: [mem 0xfe7f0000-0xfe7fffff]
[ 0.208470] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.208480] pci 0000:03:00.0: PME# disabled
[ 0.216043] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.216129] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.216210] pci 0000:00:1c.2: PCI bridge to [bus 01-02]
[ 0.216292] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.216302] pci 0000:00:1c.2: bridge window [mem 0xfa700000-0xfe6fffff]
[ 0.216314] pci 0000:00:1c.2: bridge window [mem 0xbbe00000-0xbfdfffff 64bit pref]
[ 0.216417] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.216512] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.216520] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.216527] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.216534] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.216542] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xffffffff] (subtractive decode)
[ 0.216576] pci_bus 0000:00: on NUMA node 0
[ 0.216586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.216850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.216972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.217064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.217219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.217315] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.217399] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.220018] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.236744] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.237480] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.238211] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.238941] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.239669] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.240494] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.241335] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.242177] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.243223] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.243223] vgaarb: loaded
[ 0.243223] vgaarb: bridge control possible 0000:00:02.0
[ 0.243223] PCI: Using ACPI for IRQ routing
[ 0.243223] PCI: pci_cache_line_size set to 64 bytes
[ 0.243223] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.243223] reserve RAM buffer: 000000007f7a0000 - 000000007fffffff
[ 0.244101] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.244193] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.244450] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.248220] Switching to clocksource hpet
[ 0.252172] pnp: PnP ACPI init
[ 0.252289] ACPI: bus type pnp registered
[ 0.252597] pnp 00:00: [bus 00-ff]
[ 0.252605] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.252612] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.252618] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.252625] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.252631] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.252638] pnp 00:00: [mem 0x7f800000-0xffffffff window]
[ 0.252763] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.252793] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[ 0.252911] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.252998] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.253401] pnp 00:02: [dma 4]
[ 0.253408] pnp 00:02: [io 0x0000-0x000f]
[ 0.253414] pnp 00:02: [io 0x0081-0x0083]
[ 0.253420] pnp 00:02: [io 0x0087]
[ 0.253425] pnp 00:02: [io 0x0089-0x008b]
[ 0.253431] pnp 00:02: [io 0x008f]
[ 0.253436] pnp 00:02: [io 0x00c0-0x00df]
[ 0.253510] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.253543] pnp 00:03: [io 0x0070-0x0071]
[ 0.253565] pnp 00:03: [irq 8]
[ 0.253640] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.253667] pnp 00:04: [io 0x0061]
[ 0.253737] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.253769] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.253782] pnp 00:05: [irq 13]
[ 0.253853] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.254254] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.254262] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.254269] pnp 00:06: [io 0x0290-0x0297]
[ 0.254393] system 00:06: [io 0x0290-0x0297] has been reserved
[ 0.254478] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254790] pnp 00:07: [io 0x0010-0x001f]
[ 0.254797] pnp 00:07: [io 0x0022-0x003f]
[ 0.254804] pnp 00:07: [io 0x0044-0x004d]
[ 0.254809] pnp 00:07: [io 0x0050-0x005e]
[ 0.254815] pnp 00:07: [io 0x0063]
[ 0.254820] pnp 00:07: [io 0x0060]
[ 0.254826] pnp 00:07: [io 0x0064]
[ 0.254831] pnp 00:07: [io 0x0065]
[ 0.254837] pnp 00:07: [io 0x0067-0x006f]
[ 0.254843] pnp 00:07: [io 0x0072-0x007f]
[ 0.254848] pnp 00:07: [io 0x0080]
[ 0.254854] pnp 00:07: [io 0x0084-0x0086]
[ 0.254859] pnp 00:07: [io 0x0088]
[ 0.254865] pnp 00:07: [io 0x008c-0x008e]
[ 0.254871] pnp 00:07: [io 0x0090-0x009f]
[ 0.254876] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.254882] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.254888] pnp 00:07: [io 0x025c-0x025f]
[ 0.254894] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.254900] pnp 00:07: [io 0x0800-0x087f]
[ 0.254906] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.254912] pnp 00:07: [io 0x0480-0x04bf]
[ 0.254918] pnp 00:07: [mem 0x8c000000-0x8c01ffff]
[ 0.254924] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.254930] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.254936] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.254942] pnp 00:07: [mem 0xffb00000-0xffbfffff]
[ 0.254948] pnp 00:07: [mem 0xfff00000-0xffffffff]
[ 0.255106] system 00:07: [io 0x025c-0x025f] has been reserved
[ 0.255191] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.255273] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.255355] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.255436] system 00:07: [mem 0x8c000000-0x8c01ffff] has been reserved
[ 0.255520] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.255603] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.255687] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.255770] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.255854] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.255938] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256169] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.256258] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.256397] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.256405] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.256520] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.256608] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.256692] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256792] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
[ 0.256908] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.256994] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257478] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.257485] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.257492] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.257498] pnp 00:0b: [mem 0x00100000-0x7f7fffff]
[ 0.257505] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.257645] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.257732] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.257818] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.257902] system 00:0b: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.257988] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.258344] pnp: PnP ACPI: found 12 devices
[ 0.258421] ACPI: ACPI bus type pnp unregistered
[ 0.258502] PnPBIOS: Disabled by ACPI PNP
[ 0.300686] PCI: max bus depth: 1 pci_try_num: 2
[ 0.300760] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f800000-0x7f9fffff 64bit pref]
[ 0.300872] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.300954] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.301034] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.301119] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.301204] pci 0000:00:1c.0: bridge window [mem 0xbfe00000-0xbfefffff 64bit pref]
[ 0.301311] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.301390] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.301475] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.301560] pci 0000:00:1c.1: bridge window [mem 0x7f800000-0x7f9fffff 64bit pref]
[ 0.301666] pci 0000:00:1c.2: PCI bridge to [bus 01-02]
[ 0.301745] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.301830] pci 0000:00:1c.2: bridge window [mem 0xfa700000-0xfe6fffff]
[ 0.301914] pci 0000:00:1c.2: bridge window [mem 0xbbe00000-0xbfdfffff 64bit pref]
[ 0.302021] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.302148] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.302235] pci 0000:00:1c.0: setting latency timer to 64
[ 0.302249] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.302340] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.302425] pci 0000:00:1c.1: setting latency timer to 64
[ 0.302447] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.302532] pci 0000:00:1c.2: setting latency timer to 64
[ 0.302547] pci 0000:00:1e.0: setting latency timer to 64
[ 0.302556] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.302562] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.302569] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.302575] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.302582] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xffffffff]
[ 0.302589] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.302596] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.302602] pci_bus 0000:04: resource 2 [mem 0xbfe00000-0xbfefffff 64bit pref]
[ 0.302609] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.302616] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.302623] pci_bus 0000:03: resource 2 [mem 0x7f800000-0x7f9fffff 64bit pref]
[ 0.302630] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.302636] pci_bus 0000:01: resource 1 [mem 0xfa700000-0xfe6fffff]
[ 0.302643] pci_bus 0000:01: resource 2 [mem 0xbbe00000-0xbfdfffff 64bit pref]
[ 0.302650] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.302656] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.302663] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.302669] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.302676] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xffffffff]
[ 0.302831] NET: Registered protocol family 2
[ 0.303058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.303789] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.304932] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.305500] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.305588] TCP reno registered
[ 0.305671] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.305767] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306168] NET: Registered protocol family 1
[ 0.306292] pci 0000:00:02.0: Boot video device
[ 0.306361] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.306465] pci 0000:00:1d.0: PCI INT A disabled
[ 0.306565] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.306665] pci 0000:00:1d.1: PCI INT B disabled
[ 0.306754] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.306854] pci 0000:00:1d.2: PCI INT C disabled
[ 0.306940] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.307041] pci 0000:00:1d.3: PCI INT D disabled
[ 0.307130] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.307257] pci 0000:00:1d.7: PCI INT A disabled
[ 0.307367] PCI: CLS 32 bytes, default 64
[ 0.307518] Unpacking initramfs...
[ 0.839826] Freeing initrd memory: 10160k freed
[ 0.851466] audit: initializing netlink socket (disabled)
[ 0.851572] type=2000 audit(1341787845.844:1): initialized
[ 0.885615] highmem bounce pool size: 64 pages
[ 0.885702] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.886207] VFS: Disk quotas dquot_6.5.2
[ 0.886356] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.886592] msgmni has been set to 1731
[ 0.887096] alg: No test for stdrng (krng)
[ 0.887262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.887365] io scheduler noop registered
[ 0.887440] io scheduler deadline registered
[ 0.887550] io scheduler cfq registered (default)
[ 0.887823] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.887908] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.888086] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.888157] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.888289] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.888358] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.888571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.888722] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.888804] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.889377] acpiphp: Slot [1] registered
[ 0.889715] intel_idle: MWAIT substates: 0x20220
[ 0.889735] intel_idle: v0.4 model 0x1C
[ 0.889740] intel_idle: lapic_timer_reliable_states 0x2
[ 0.889746] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.889935] ERST: Table is not found!
[ 0.890010] GHES: HEST is not enabled!
[ 0.890116] isapnp: Scanning for PnP cards...
[ 1.244146] isapnp: No Plug & Play device found
[ 1.244412] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.248996] Linux agpgart interface v0.103
[ 1.249305] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.249542] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.249803] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.250116] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.250599] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.253676] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.253768] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.254240] mousedev: PS/2 mouse device common for all mice
[ 1.254442] rtc_cmos 00:03: RTC can wake from S4
[ 1.254759] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.254882] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.255185] cpuidle: using governor ladder
[ 1.255579] cpuidle: using governor menu
[ 1.256273] TCP cubic registered
[ 1.256478] NET: Registered protocol family 10
[ 1.257888] Mobile IPv6
[ 1.257965] NET: Registered protocol family 17
[ 1.258048] Registering the dns_resolver key type
[ 1.258186] Using IPI No-Shortcut mode
[ 1.258660] PM: Hibernation image not present or could not be loaded.
[ 1.258687] registered taskstats version 1
[ 1.259381] rtc_cmos 00:03: setting system clock to 2012-07-08 22:50:46 UTC (1341787846)
[ 1.259590] Initializing network drop monitor service
[ 1.259881] Freeing unused kernel memory: 416k freed
[ 1.260451] Write protecting the kernel text: 2848k
[ 1.260613] Write protecting the kernel read-only data: 1092k
[ 1.260695] NX-protecting the kernel data: 3296k
[ 1.292249] udevd[48]: starting version 175
[ 1.399644] usbcore: registered new interface driver usbfs
[ 1.399814] usbcore: registered new interface driver hub
[ 1.401936] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.402088] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.402243] r8169 0000:04:00.0: setting latency timer to 64
[ 1.402358] r8169 0000:04:00.0: irq 43 for MSI/MSI-X
[ 1.404062] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf8208000, 00:22:15:36:20:b1, XID 1c4000c0 IRQ 43
[ 1.404188] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.413188] usbcore: registered new device driver usb
[ 1.415294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.415453] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.415578] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.415589] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.415741] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.415898] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.415995] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.420044] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.445117] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeb3fc00
[ 1.470673] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.476084] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.476256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.476354] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.476470] usb usb1: Product: EHCI Host Controller
[ 1.476556] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.476648] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.477163] hub 1-0:1.0: USB hub found
[ 1.477257] hub 1-0:1.0: 8 ports detected
[ 1.477659] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.477773] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.477784] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.477894] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.478057] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
[ 1.478262] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.478360] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.481753] usb usb2: Product: UHCI Host Controller
[ 1.481841] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.481930] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.483358] hub 2-0:1.0: USB hub found
[ 1.483460] hub 2-0:1.0: 2 ports detected
[ 1.483800] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.483916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.483928] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.484103] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.484297] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 1.484503] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.484595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.484705] usb usb3: Product: UHCI Host Controller
[ 1.484788] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.484875] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.489115] hub 3-0:1.0: USB hub found
[ 1.489224] hub 3-0:1.0: 2 ports detected
[ 1.489585] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.489707] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.489720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.489837] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.490049] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 1.490265] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.490361] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.490475] usb usb4: Product: UHCI Host Controller
[ 1.490566] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.490660] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.497248] hub 4-0:1.0: USB hub found
[ 1.497348] hub 4-0:1.0: 2 ports detected
[ 1.497713] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.497830] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.497841] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.497948] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.498132] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 1.498332] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.498424] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.498534] usb usb5: Product: UHCI Host Controller
[ 1.498619] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.498707] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.507266] hub 5-0:1.0: USB hub found
[ 1.507377] hub 5-0:1.0: 2 ports detected
[ 1.522073] SCSI subsystem initialized
[ 1.534645] libata version 3.00 loaded.
[ 1.535913] ata_piix 0000:00:1f.2: version 2.13
[ 1.535957] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.536197] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.536653] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.537971] scsi0 : ata_piix
[ 1.538440] scsi1 : ata_piix
[ 1.543370] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.543475] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.704392] ata1.00: ATA-8: SAMSUNG HN-M101MBB, 2AR10001, max UDMA/133
[ 1.704485] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.712393] ata1.00: configured for UDMA/133
[ 1.712766] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HN-M101M 2AR1 PQ: 0 ANSI: 5
[ 1.725026] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.725394] sd 0:0:0:0: [sda] Write Protect is off
[ 1.725491] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.725609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.750740] sda: sda1 sda2
[ 1.751749] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.900065] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[ 2.043184] usb 1-6: New USB device found, idVendor=0bda, idProduct=0158
[ 2.043299] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.043389] usb 1-6: Product: USB2.0-CRW
[ 2.043467] usb 1-6: Manufacturer: Generic
[ 2.043547] usb 1-6: SerialNumber: 20071114173400000
[ 2.055185] usbcore: registered new interface driver uas
[ 2.059060] Initializing USB Mass Storage driver...
[ 2.059621] usbcore: registered new interface driver usb-storage
[ 2.059716] USB Mass Storage support registered.
[ 2.064252] scsi2 : usb-storage 1-6:1.0
[ 2.064613] usbcore: registered new interface driver ums-realtek
[ 2.065200] device-mapper: uevent: version 1.0.3
[ 2.066763] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel at redhat.com
[ 2.288068] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.401758] PM: Starting manual resume from disk
[ 2.401862] PM: Hibernation image partition 254:1 present
[ 2.401867] PM: Looking for hibernation image.
[ 2.402161] PM: Image not found (code -22)
[ 2.402165] PM: Hibernation image not present or could not be loaded.
[ 2.448769] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.471523] usb 3-1: New USB device found, idVendor=0472, idProduct=0065
[ 2.471633] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.471717] usb 3-1: Product: Generic USB Hub
[ 2.471792] usb 3-1: Manufacturer: Chicony
[ 2.474604] hub 3-1:1.0: USB hub found
[ 2.476519] hub 3-1:1.0: 3 ports detected
[ 2.757533] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
[ 2.898535] usb 3-1.1: New USB device found, idVendor=0472, idProduct=0065
[ 2.898622] usb 3-1.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 2.898722] usb 3-1.1: Product: PFU-65 USB Keyboard
[ 2.898797] usb 3-1.1: Manufacturer: Chicony
[ 3.070498] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.076475] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 3.635017] udevd[269]: starting version 175
[ 4.075318] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 4.075444] ACPI: Power Button [PWRB]
[ 4.075758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.075874] ACPI: Power Button [PWRF]
[ 4.196995] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.197254] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.197330] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.208836] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 4.208966] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 4.262995] intel_rng: FWH not detected
[ 4.279300] hda_codec: ALC888: BIOS auto-probing.
[ 4.285232] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 4.310757] iTCO_vendor_support: vendor-support=0
[ 4.387292] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.400568] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.418819] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.538128] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.538507] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 4.562917] cfg80211: Calling CRDA to update world regulatory domain
[ 4.689331] leds_ss4200: no LED devices found
[ 4.773051] [drm] Initialized drm 1.1.0 20060810
[ 4.783627] input: Chicony PFU-65 USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input5
[ 4.784608] generic-usb 0003:0472:0065.0001: input,hidraw0: USB HID v1.00 Keyboard [Chicony PFU-65 USB Keyboard] on usb-0000:00:1d.1-1.1/input0
[ 4.784822] usbcore: registered new interface driver usbhid
[ 4.784912] usbhid: USB HID core driver
[ 4.821986] rt2800pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.822142] rt2800pci 0000:03:00.0: setting latency timer to 64
[ 4.848551] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.848645] i915 0000:00:02.0: setting latency timer to 64
[ 4.861814] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.863702] Registered led device: rt2800pci-phy0::radio
[ 4.863787] Registered led device: rt2800pci-phy0::assoc
[ 4.863866] Registered led device: rt2800pci-phy0::quality
[ 4.892339] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
[ 4.892353] [drm:intel_opregion_setup], ACPI OpRegion not supported!
[ 4.892392] [drm:i915_init_phys_hws], Enabled hardware status page
[ 4.892405] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.892496] [drm] Driver supports precise vblank timestamp query.
[ 4.892590] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[ 4.893031] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0
[ 4.893049] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 4.893088] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 4.893098] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 4.893147] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 4.893156] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 4.893176] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
[ 4.893188] [drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
[ 4.893244] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 4.893284] [drm:intel_modeset_init], 2 display pipes available.
[ 4.893310] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 4.893336] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 4.893352] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.893783] [drm:intel_lvds_init], LVDS is not present in VBT
[ 4.893953] [drm:intel_setup_outputs], probing SDVOB
[ 5.008351] [drm:intel_sdvo_debug_write], SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS)
[ 5.011313] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 47 02 01 01 01 01 00
[ 5.026884] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
[ 5.026894] vendor_id: 2
[ 5.026896] device_id: 71
[ 5.026898] device_rev_id: 2
[ 5.026900] sdvo_version_major: 1
[ 5.026902] sdvo_version_minor: 1
[ 5.026904] sdvo_inputs_mask: 1
[ 5.026906] smooth_scaling: 0
[ 5.026908] sharp_scaling: 0
[ 5.026909] up_scaling: 0
[ 5.026911] down_scaling: 0
[ 5.026913] stall_support: 0
[ 5.026915] output_flags: 1
[ 5.027724] [drm:intel_sdvo_debug_write], SDVOB: W: 0E (SDVO_CMD_GET_ACTIVE_HOT_PLUG)
[ 5.030708] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 00 00
[ 5.035890] [drm:intel_sdvo_debug_write], SDVOB: W: 9D (SDVO_CMD_GET_SUPP_ENCODE)
[ 5.038860] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 10 12
[ 5.044177] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[ 5.048386] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.050113] [drm:intel_sdvo_debug_write], SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[ 5.053088] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 74 40
[ 5.061712] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:47.02, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[ 5.061725] [drm:intel_setup_outputs], probing SDVOC
[ 5.063801] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[ 5.063808] [drm:intel_sdvo_init], No SDVO device found on SDVOC
[ 5.063877] [drm:intel_tv_init], Integrated TV is not present.
[ 5.063889] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 5.069336] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.071071] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 5.081010] [drm:intel_update_fbc],
[ 5.081016] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.081024] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.081031] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 5.081038] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 5.081046] [drm:i9xx_update_wm], memory self refresh disabled
[ 5.081054] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
[ 5.081060] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 5.081068] [drm:i915_get_vblank_counter], trying to get vblank count for disabled pipe B
[ 5.081078] [drm:intel_update_fbc],
[ 5.081083] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.081090] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.081097] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 5.081103] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 5.081111] [drm:i9xx_update_wm], memory self refresh disabled
[ 5.084895] [drm] initialized overlay support
[ 5.085003] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 5.090445] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.092197] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[ 5.108041] [drm:intel_crt_detect], CRT not detected via hotplug
[ 5.108049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[ 5.108059] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[ 5.108066] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 5.111022] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 5.116217] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 5.116226] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 5.122141] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 5.177240] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 5.232323] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 5.232331] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 5.238247] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 5.293382] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 5.348466] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[ 5.348496] [drm:drm_mode_debug_printmodeline], Modeline 12:"1920x1080i" 0 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
[ 5.348508] [drm:drm_mode_prune_invalid], Not using 1920x1080i mode 7
[ 5.348517] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] probed modes :
[ 5.348525] [drm:drm_mode_debug_printmodeline], Modeline 11:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 5.348538] [drm:drm_mode_debug_printmodeline], Modeline 13:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 5.348550] [drm:drm_setup_crtcs],
[ 5.348558] [drm:drm_enable_connectors], connector 5 enabled? no
[ 5.348565] [drm:drm_enable_connectors], connector 8 enabled? yes
[ 5.348571] [drm:drm_target_preferred], looking for cmdline mode on connector 8
[ 5.348578] [drm:drm_target_preferred], looking for preferred mode on connector 8
[ 5.348585] [drm:drm_target_preferred], found mode 1920x1080
[ 5.348590] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[ 5.348599] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
[ 5.366337] [drm:intelfb_create], allocated 1920x1080 fb: 0x00020000, bo f708c580
[ 5.366585] fbcon: inteldrmfb (fb0) is primary device
[ 5.368947] [drm:drm_crtc_helper_set_config],
[ 5.368954] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:14] #connectors=1 (x y) (0 0)
[ 5.368972] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 5.368978] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 5.368983] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 5.368992] [drm:drm_mode_debug_printmodeline], Modeline 12:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 5.369004] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 5.369009] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 5.369015] [drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 5.369021] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 5.369027] [drm:drm_mode_debug_printmodeline], Modeline 12:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 5.369043] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[ 5.369049] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 5.374486] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.376623] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[ 5.376629] [drm:drm_mode_debug_printmodeline], Modeline 12:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 5.416040] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 7680
[ 5.416049] [drm:intel_update_fbc],
[ 5.416055] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.416061] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.416067] [drm:intel_calculate_wm], FIFO entries required for mode: 47
[ 5.416072] [drm:intel_calculate_wm], FIFO watermark level: -18
[ 5.416077] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[ 5.416082] [drm:i9xx_update_wm], self-refresh entries: 120
[ 5.416088] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[ 5.416094] [drm:i9xx_update_wm], memory self refresh enabled
[ 5.416100] [drm:drm_crtc_helper_set_mode], [ENCODER:7:TMDS-7] set [MODE:12:1920x1080]
[ 5.416107] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP)
[ 5.423966] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.425696] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00 (SDVO_CMD_SET_TARGET_OUTPUT)
[ 5.431105] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.432844] [drm:intel_sdvo_debug_write], SDVOB: W: 16 02 3A 80 18 71 38 2D 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[ 5.445624] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.447347] [drm:intel_sdvo_debug_write], SDVOB: W: 17 58 2C 45 00 1E 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[ 5.460129] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.461852] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT)
[ 5.466042] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.467765] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 01 (SDVO_CMD_SET_ENCODE)
[ 5.471956] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.473691] [drm:intel_sdvo_debug_write], SDVOB: W: 8E 00 (SDVO_CMD_SET_COLORIMETRY)
[ 5.477882] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.479605] [drm:intel_sdvo_debug_write], SDVOB: W: 93 01 00 (SDVO_CMD_SET_HBUF_INDEX)
[ 5.485101] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.486884] [drm:intel_sdvo_debug_write], SDVOB: W: 98 82 02 0D 00 6F 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[ 5.499740] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.501489] [drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[ 5.514296] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.516049] [drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[ 5.528849] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.530575] [drm:intel_sdvo_debug_write], SDVOB: W: 98 00 00 00 00 00 00 00 00 (SDVO_CMD_SET_HBUF_DATA)
[ 5.543370] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.545118] [drm:intel_sdvo_debug_write], SDVOB: W: 9A C0 (SDVO_CMD_SET_HBUF_TXRATE)
[ 5.549314] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.551039] [drm:intel_sdvo_debug_write], SDVOB: W: 14 02 3A 80 18 71 38 2D 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[ 5.563831] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.565585] [drm:intel_sdvo_debug_write], SDVOB: W: 15 58 2C 45 00 1E 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[ 5.578394] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.580131] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01 (SDVO_CMD_SET_CLOCK_RATE_MULT)
[ 5.584329] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.586059] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 5.586066] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 5.586073] [drm:intel_calculate_wm], FIFO entries required for mode: 47
[ 5.586078] [drm:intel_calculate_wm], FIFO watermark level: -18
[ 5.586083] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[ 5.586088] [drm:i9xx_update_wm], self-refresh entries: 120
[ 5.586093] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[ 5.586100] [drm:i9xx_update_wm], memory self refresh enabled
[ 5.586830] [drm:intel_update_fbc],
[ 5.616039] [drm:intel_sdvo_debug_write], SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS)
[ 5.618992] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[ 5.622446] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[ 5.627857] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[ 5.629600] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 5.629607] [drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] set DPMS on
[ 5.629618] [drm:drm_crtc_helper_set_config],
[ 5.629623] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 5.629799] [drm:drm_crtc_helper_set_config],
[ 5.629806] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:14] #connectors=1 (x y) (0 0)
[ 5.629829] [drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 5.655152] Console: switching to colour frame buffer device 240x67
[ 5.655204] [drm:drm_crtc_helper_set_config],
[ 5.655209] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:14] #connectors=1 (x y) (0 0)
[ 5.655226] [drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 5.680474] fb0: inteldrmfb frame buffer device
[ 5.680478] drm: registered panic notifier
[ 5.680753] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.448887] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 6.651397] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 6.778319] loop: module loaded
[ 7.861472] Adding 4194300k swap on /dev/mapper/minion-swap. Priority:-1 extents:1 across:4194300k
[ 8.249988] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.276179] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.177555] [drm:drm_crtc_helper_set_config],
[ 9.177562] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:14] #connectors=1 (x y) (0 0)
[ 9.177582] [drm:drm_crtc_helper_set_config], [CONNECTOR:8:HDMI-A-1] to [CRTC:3]
[ 9.789553] r8169 0000:04:00.0: eth0: link down
[ 9.789666] r8169 0000:04:00.0: eth0: link down
[ 9.790139] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.178608] r8169 0000:04:00.0: eth0: link up
[ 12.179061] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.728043] [drm:intel_crt_detect], CRT not detected via hotplug
[ 15.728054] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[ 15.728063] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 15.731026] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 15.736269] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 15.736279] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 15.742199] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 15.797328] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 15.852427] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 15.852437] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 1 to 1
[ 22.304028] eth0: no IPv6 routers present
[ 25.904046] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.904056] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[ 25.904066] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 25.907029] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 25.912266] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 25.912276] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 25.918200] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 25.973328] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 26.028424] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 26.028434] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 1 to 1
[ 36.080045] [drm:intel_crt_detect], CRT not detected via hotplug
[ 36.080056] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[ 36.080066] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 36.083027] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 36.088269] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 36.088278] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 36.094201] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 36.149328] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 36.204423] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 36.204434] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 1 to 1
[ 46.256042] [drm:intel_crt_detect], CRT not detected via hotplug
[ 46.256053] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[ 46.256063] [drm:intel_sdvo_debug_write], SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[ 46.259025] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[ 46.264362] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[ 46.264375] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 46.270444] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 46.325565] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[ 46.380661] [drm:drm_detect_monitor_audio], Monitor has basic audio support
[ 46.380672] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 1 to 1
More information about the Intel-gfx
mailing list