[Intel-gfx] [PATCH 2/4] drm/i915: load boot context at driver init time
Jesse Barnes
jbarnes at virtuousgeek.org
Thu Jun 14 20:04:48 CEST 2012
According to the bspec for MBCTL:
Driver must set bit in the following scenarios:
- to realod teh h/w boot context every time it gets loaded through OS
- after an FLR clears the register (BIOS won't run afterwards)
References: https://bugs.freedesktop.org/show_bug.cgi?id=50237
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_pm.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 4565512..c50d5e4 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3361,6 +3361,9 @@ static void gen6_init_clock_gating(struct drm_device *dev)
ILK_DPARB_CLK_GATE |
ILK_DPFD_CLK_GATE);
+ I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
+ GEN6_MBCTL_ENABLE_BOOT_FETCH);
+
for_each_pipe(pipe) {
I915_WRITE(DSPCNTR(pipe),
I915_READ(DSPCNTR(pipe)) |
@@ -3438,6 +3441,9 @@ static void ivybridge_init_clock_gating(struct drm_device *dev)
intel_flush_display_plane(dev_priv, pipe);
}
+ I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
+ GEN6_MBCTL_ENABLE_BOOT_FETCH);
+
gen7_setup_fixed_func_scheduler(dev_priv);
/* WaDisable4x2SubspanOptimization */
@@ -3476,6 +3482,9 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+ I915_WRITE(GEN6_MBCTL, I915_READ(GEN6_MBCTL) |
+ GEN6_MBCTL_ENABLE_BOOT_FETCH);
+
/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
* gating disable must be set. Failure to set it results in
--
1.7.9.5
More information about the Intel-gfx
mailing list