[Intel-gfx] [PATCH 18/22] drm/i915: ValleyView IRQ support
Daniel Vetter
daniel at ffwll.ch
Fri Mar 30 18:46:55 CEST 2012
On Wed, Mar 28, 2012 at 01:39:38PM -0700, Jesse Barnes wrote:
> ValleyView has a new interrupt architecture; best to put it in a new set
> of functions. Also make sure the ring mask functions handle ValleyView.
>
> FIXME: fix flipping; need to enable interrupts and call prepare/finish
>
> Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
> ---
> drivers/gpu/drm/i915/i915_debugfs.c | 40 ++++-
> drivers/gpu/drm/i915/i915_irq.c | 338 ++++++++++++++++++++++++++++++-
> drivers/gpu/drm/i915/i915_reg.h | 7 +-
> drivers/gpu/drm/i915/intel_ringbuffer.c | 4 +-
> 4 files changed, 383 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index e74674b..d226f2f 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -468,7 +468,45 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
> if (ret)
> return ret;
>
> - if (!HAS_PCH_SPLIT(dev)) {
> + if (IS_VALLEYVIEW(dev)) {
> + seq_printf(m, "Display IER:\t%08x\n",
> + I915_READ(VLV_IER));
> + seq_printf(m, "Display IIR:\t%08x\n",
> + I915_READ(VLV_IIR));
> + seq_printf(m, "Display IIR_RW:\t%08x\n",
> + I915_READ(VLV_IIR_RW));
> + seq_printf(m, "Display IMR:\t%08x\n",
> + I915_READ(VLV_IMR));
> + for_each_pipe(pipe)
> + seq_printf(m, "Pipe %c stat:\t%08x\n",
> + pipe_name(pipe),
> + I915_READ(PIPESTAT(pipe)));
> +
> + seq_printf(m, "Master IER:\t%08x\n",
> + I915_READ(VLV_MASTER_IER));
> +
> + seq_printf(m, "Render IER:\t%08x\n",
> + I915_READ(GTIER));
> + seq_printf(m, "Render IIR:\t%08x\n",
> + I915_READ(GTIIR));
> + seq_printf(m, "Render IMR:\t%08x\n",
> + I915_READ(GTIMR));
> +
> + seq_printf(m, "PM IER:\t\t%08x\n",
> + I915_READ(GEN6_PMIER));
> + seq_printf(m, "PM IIR:\t\t%08x\n",
> + I915_READ(GEN6_PMIIR));
> + seq_printf(m, "PM IMR:\t\t%08x\n",
> + I915_READ(GEN6_PMIMR));
> +
> + seq_printf(m, "Port hotplug:\t%08x\n",
> + I915_READ(PORT_HOTPLUG_EN));
> + seq_printf(m, "DPFLIPSTAT:\t%08x\n",
> + I915_READ(VLV_DPFLIPSTAT));
> + seq_printf(m, "DPINVGTT:\t%08x\n",
> + I915_READ(DPINVGTT));
> +
> + } else if (!HAS_PCH_SPLIT(dev)) {
> seq_printf(m, "Interrupt enable: %08x\n",
> I915_READ(IER));
> seq_printf(m, "Interrupt identity: %08x\n",
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 998116e..01fb650 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -120,6 +120,10 @@ void intel_enable_asle(struct drm_device *dev)
> drm_i915_private_t *dev_priv = dev->dev_private;
> unsigned long irqflags;
>
> + /* FIXME: opregion/asle for VLV */
> + if (IS_VALLEYVIEW(dev))
> + return;
> +
> spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
>
> if (HAS_PCH_SPLIT(dev))
> @@ -426,6 +430,119 @@ static void gen6_pm_rps_work(struct work_struct *work)
> mutex_unlock(&dev_priv->dev->struct_mutex);
> }
>
> +static irqreturn_t valleyview_irq_handler(DRM_IRQ_ARGS)
> +{
> + struct drm_device *dev = (struct drm_device *) arg;
> + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> + u32 iir, gt_iir, pm_iir;
> + irqreturn_t ret = IRQ_NONE;
> + unsigned long irqflags;
> + int pipe;
> + u32 pipe_stats[I915_MAX_PIPES];
> + u32 vblank_status;
> + int vblank = 0;
> + bool blc_event;
> +
> + atomic_inc(&dev_priv->irq_received);
> +
> + vblank_status = PIPE_START_VBLANK_INTERRUPT_STATUS |
> + PIPE_VBLANK_INTERRUPT_STATUS;
> +
> + while (true) {
> + iir = I915_READ(VLV_IIR);
> + gt_iir = I915_READ(GTIIR);
> + pm_iir = I915_READ(GEN6_PMIIR);
> +
> + if (gt_iir == 0 && pm_iir == 0 && iir == 0)
> + goto out;
> +
> + ret = IRQ_HANDLED;
> +
> + if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
> + notify_ring(dev, &dev_priv->ring[RCS]);
> + if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT)
> + notify_ring(dev, &dev_priv->ring[VCS]);
> + if (gt_iir & GT_BLT_USER_INTERRUPT)
> + notify_ring(dev, &dev_priv->ring[BCS]);
> +
> + if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
> + GT_GEN6_BSD_CS_ERROR_INTERRUPT |
> + GT_RENDER_CS_ERROR_INTERRUPT)) {
> + DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
> + i915_handle_error(dev, false);
> + }
Ben just cleaned up this code slightly (well, the reg definitions mostly
in i915_irq.c). I'm also wondering whether we should share the gt_iir
handling a bit - after all we share the gt core with ilk. But this can
easily be done in a follow-up patch.
> +
> + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> + for_each_pipe(pipe) {
> + int reg = PIPESTAT(pipe);
> + pipe_stats[pipe] = I915_READ(reg);
> +
> + /*
> + * Clear the PIPE*STAT regs before the IIR
> + */
> + if (pipe_stats[pipe] & 0x8000ffff) {
> + if (pipe_stats[pipe] & PIPE_FIFO_UNDERRUN_STATUS)
> + DRM_DEBUG_DRIVER("pipe %c underrun\n",
> + pipe_name(pipe));
> + I915_WRITE(reg, pipe_stats[pipe]);
> + }
> + }
> + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +
> + /* Consume port. Then clear IIR or we'll miss events */
> + if (iir & I915_DISPLAY_PORT_INTERRUPT) {
> + u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
> +
> + DRM_DEBUG_DRIVER("hotplug event received, stat 0x%08x\n",
> + hotplug_status);
> + if (hotplug_status & dev_priv->hotplug_supported_mask)
> + queue_work(dev_priv->wq,
> + &dev_priv->hotplug_work);
> +
> + I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
> + I915_READ(PORT_HOTPLUG_STAT);
> + }
> +
> +
> + if (iir & I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT) {
> + drm_handle_vblank(dev, 0);
> + vblank++;
> + if (!dev_priv->flip_pending_is_done) {
> + intel_finish_page_flip(dev, 0);
> + }
> + }
> +
> + if (iir & I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT) {
> + drm_handle_vblank(dev, 1);
> + vblank++;
> + if (!dev_priv->flip_pending_is_done) {
> + intel_finish_page_flip(dev, 0);
> + }
> + }
> +
> + if (pipe_stats[pipe] & PIPE_LEGACY_BLC_EVENT_STATUS)
> + blc_event = true;
> +
> + if (pm_iir & GEN6_PM_DEFERRED_EVENTS) {
> + unsigned long flags;
> + spin_lock_irqsave(&dev_priv->rps_lock, flags);
> + WARN(dev_priv->pm_iir & pm_iir, "Missed a PM interrupt\n");
> + dev_priv->pm_iir |= pm_iir;
> + I915_WRITE(GEN6_PMIMR, dev_priv->pm_iir);
> + POSTING_READ(GEN6_PMIMR);
> + spin_unlock_irqrestore(&dev_priv->rps_lock, flags);
> + queue_work(dev_priv->wq, &dev_priv->rps_work);
> + }
> +
> + I915_WRITE(GTIIR, gt_iir);
> + I915_WRITE(GEN6_PMIIR, pm_iir);
> + I915_WRITE(VLV_IIR, iir);
> + }
> +
> +out:
> + return ret;
> +}
> +
> static void pch_irq_handler(struct drm_device *dev)
> {
> drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> @@ -1567,6 +1684,32 @@ static int ivybridge_enable_vblank(struct drm_device *dev, int pipe)
> return 0;
> }
>
> +static int valleyview_enable_vblank(struct drm_device *dev, int pipe)
> +{
> + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> + unsigned long irqflags;
> + u32 dpfl, imr;
> +
> + if (!i915_pipe_enabled(dev, pipe))
> + return -EINVAL;
> +
> + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> + dpfl = I915_READ(VLV_DPFLIPSTAT);
> + imr = I915_READ(VLV_IMR);
> + if (pipe == 0) {
> + dpfl |= PIPEA_VBLANK_INT_EN;
> + imr &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
> + } else {
> + dpfl |= PIPEA_VBLANK_INT_EN;
> + imr &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
> + }
> + I915_WRITE(VLV_DPFLIPSTAT, dpfl);
> + I915_WRITE(VLV_IMR, imr);
> + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +
> + return 0;
> +}
> +
> /* Called from drm generic code, passed 'crtc' which
> * we use as a pipe index
> */
> @@ -1608,6 +1751,28 @@ static void ivybridge_disable_vblank(struct drm_device *dev, int pipe)
> spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> }
>
> +static void valleyview_disable_vblank(struct drm_device *dev, int pipe)
> +{
> + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> + unsigned long irqflags;
> + u32 dpfl, imr;
> +
> + spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
> + dpfl = I915_READ(VLV_DPFLIPSTAT);
> + imr = I915_READ(VLV_IMR);
> + if (pipe == 0) {
> + dpfl &= ~PIPEA_VBLANK_INT_EN;
> + imr |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
> + } else {
> + dpfl &= ~PIPEB_VBLANK_INT_EN;
> + imr |= I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
> + }
> + I915_WRITE(VLV_IMR, imr);
> + I915_WRITE(VLV_DPFLIPSTAT, dpfl);
> + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> +}
> +
> +
> /* Set the vblank monitor pipe
> */
> int i915_vblank_pipe_set(struct drm_device *dev, void *data,
> @@ -1817,6 +1982,53 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
> POSTING_READ(SDEIER);
> }
>
> +static void valleyview_irq_preinstall(struct drm_device *dev)
> +{
> + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> + int pipe;
> +
> + atomic_set(&dev_priv->irq_received, 0);
> +
> + INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
> + INIT_WORK(&dev_priv->error_work, i915_error_work_func);
> +
> + /* VLV magic */
> + I915_WRITE(VLV_IMR, 0);
> + I915_WRITE(RING_IMR(RENDER_RING_BASE), 0);
> + I915_WRITE(RING_IMR(GEN6_BSD_RING_BASE), 0);
> + I915_WRITE(RING_IMR(BLT_RING_BASE), 0);
> +
> + if (IS_GEN6(dev) || IS_GEN7(dev)) {
> + /* Workaround stalls observed on Sandy Bridge GPUs by
> + * making the blitter command streamer generate a
> + * write to the Hardware Status Page for
> + * MI_USER_INTERRUPT. This appears to serialize the
> + * previous seqno write out before the interrupt
> + * happens.
> + */
> + I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT);
> + I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT);
> + }
That wa hopefully doesn't apply to vlv. And it's dead by now anyway.
Please kill it.
> +
> + /* and GT */
> + I915_WRITE(GTIIR, I915_READ(GTIIR));
> + I915_WRITE(GTIIR, I915_READ(GTIIR));
> + I915_WRITE(GTIMR, 0xffffffff);
> + I915_WRITE(GTIER, 0x0);
> + POSTING_READ(GTIER);
> +
> + I915_WRITE(DPINVGTT, 0xff);
> +
> + I915_WRITE(PORT_HOTPLUG_EN, 0);
> + I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
> + for_each_pipe(pipe)
> + I915_WRITE(PIPESTAT(pipe), 0xffff);
> + I915_WRITE(VLV_IIR, 0xffffffff);
> + I915_WRITE(VLV_IMR, 0xffffffff);
> + I915_WRITE(VLV_IER, 0x0);
> + POSTING_READ(VLV_IER);
> +}
> +
> /*
> * Enable digital hotplug on the PCH, and configure the DP short pulse
> * duration to 2ms (which is the minimum in the Display Port spec)
> @@ -1963,6 +2175,96 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
> return 0;
> }
>
> +static int valleyview_irq_postinstall(struct drm_device *dev)
> +{
> + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> + u32 render_irqs;
> + u32 enable_mask;
> + u32 hotplug_en = I915_READ(PORT_HOTPLUG_EN);
> + u16 msid;
> +
> + enable_mask = I915_DISPLAY_PORT_INTERRUPT;
> + enable_mask |= I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT |
> + I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
> +
> + dev_priv->irq_mask = ~enable_mask;
> +
> +
> + DRM_INIT_WAITQUEUE(&dev_priv->ring[RCS].irq_queue);
> + DRM_INIT_WAITQUEUE(&dev_priv->ring[VCS].irq_queue);
> + DRM_INIT_WAITQUEUE(&dev_priv->ring[BCS].irq_queue);
> +
> + dev_priv->pipestat[0] = 0;
> + dev_priv->pipestat[1] = 0;
> +
> + dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
> +
> + /* Hack for broken MSIs on VLV */
> + pci_write_config_dword(dev_priv->dev->pdev, 0x94, 0xfee00000);
> + pci_read_config_word(dev->pdev, 0x98, &msid);
> + msid &= 0xff; /* mask out delivery bits */
> + msid |= (1<<14);
> + pci_write_config_word(dev_priv->dev->pdev, 0x98, msid);
> +
> + I915_WRITE(VLV_IMR, dev_priv->irq_mask);
> + I915_WRITE(VLV_IER, enable_mask);
> + I915_WRITE(VLV_IIR, 0xffffffff);
> + I915_WRITE(PIPESTAT(0), 0xffff);
> + I915_WRITE(PIPESTAT(1), 0xffff);
> + POSTING_READ(VLV_IER);
> +
> + I915_WRITE(VLV_IIR, 0xffffffff);
> + I915_WRITE(VLV_IIR, 0xffffffff);
> +
> + render_irqs = GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT |
> + GT_GEN6_BLT_CS_ERROR_INTERRUPT |
> + GT_BLT_USER_INTERRUPT |
> + GT_GEN6_BSD_USER_INTERRUPT |
> + GT_GEN6_BSD_CS_ERROR_INTERRUPT |
> + GT_GEN7_L3_PARITY_ERROR_INTERRUPT |
> + GT_PIPE_NOTIFY |
> + GT_RENDER_CS_ERROR_INTERRUPT |
> + GT_SYNC_STATUS |
> + GT_USER_INTERRUPT;
> +
> + dev_priv->gt_irq_mask = ~render_irqs;
> +
> + I915_WRITE(GTIIR, I915_READ(GTIIR));
> + I915_WRITE(GTIIR, I915_READ(GTIIR));
> + I915_WRITE(GTIMR, 0);
> + I915_WRITE(GTIER, render_irqs);
> + POSTING_READ(GTIER);
> +
> + /* ack & enable invalid PTE error interrupts */
> +#if 0 /* FIXME: add support to irq handler for checking these bits */
> + I915_WRITE(DPINVGTT, DPINVGTT_STATUS_MASK);
> + I915_WRITE(DPINVGTT, DPINVGTT_EN_MASK);
> +#endif
> +
> + I915_WRITE(VLV_MASTER_IER, MASTER_INTERRUPT_ENABLE);
> +#if 0 /* FIXME: check register definitions; some have moved */
> + /* Note HDMI and DP share bits */
> + if (dev_priv->hotplug_supported_mask & HDMIB_HOTPLUG_INT_STATUS)
> + hotplug_en |= HDMIB_HOTPLUG_INT_EN;
> + if (dev_priv->hotplug_supported_mask & HDMIC_HOTPLUG_INT_STATUS)
> + hotplug_en |= HDMIC_HOTPLUG_INT_EN;
> + if (dev_priv->hotplug_supported_mask & HDMID_HOTPLUG_INT_STATUS)
> + hotplug_en |= HDMID_HOTPLUG_INT_EN;
> + if (dev_priv->hotplug_supported_mask & SDVOC_HOTPLUG_INT_STATUS)
> + hotplug_en |= SDVOC_HOTPLUG_INT_EN;
> + if (dev_priv->hotplug_supported_mask & SDVOB_HOTPLUG_INT_STATUS)
> + hotplug_en |= SDVOB_HOTPLUG_INT_EN;
> + if (dev_priv->hotplug_supported_mask & CRT_HOTPLUG_INT_STATUS) {
> + hotplug_en |= CRT_HOTPLUG_INT_EN;
> + hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
> + }
> +#endif
> +
> + I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
> +
> + return 0;
> +}
> +
> static void i915_driver_irq_preinstall(struct drm_device * dev)
> {
> drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> @@ -2066,6 +2368,30 @@ static int i915_driver_irq_postinstall(struct drm_device *dev)
> return 0;
> }
>
> +static void valleyview_irq_uninstall(struct drm_device *dev)
> +{
> + drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> + int pipe;
> +
> + if (!dev_priv)
> + return;
> +
> + dev_priv->vblank_pipe = 0;
> +
> + for_each_pipe(pipe)
> + I915_WRITE(PIPESTAT(pipe), 0xffff);
> +
> + I915_WRITE(HWSTAM, 0xffffffff);
> + I915_WRITE(PORT_HOTPLUG_EN, 0);
> + I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
> + for_each_pipe(pipe)
> + I915_WRITE(PIPESTAT(pipe), 0xffff);
> + I915_WRITE(VLV_IIR, 0xffffffff);
> + I915_WRITE(VLV_IMR, 0xffffffff);
> + I915_WRITE(VLV_IER, 0x0);
> + POSTING_READ(VLV_IER);
> +}
> +
> static void ironlake_irq_uninstall(struct drm_device *dev)
> {
> drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
> @@ -2121,7 +2447,8 @@ void intel_irq_init(struct drm_device *dev)
> {
> dev->driver->get_vblank_counter = i915_get_vblank_counter;
> dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
> - if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) {
> + if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev) ||
> + IS_VALLEYVIEW(dev)) {
> dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
> dev->driver->get_vblank_counter = gm45_get_vblank_counter;
> }
> @@ -2132,7 +2459,14 @@ void intel_irq_init(struct drm_device *dev)
> dev->driver->get_vblank_timestamp = NULL;
> dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
>
> - if (IS_IVYBRIDGE(dev)) {
> + if (IS_VALLEYVIEW(dev)) {
> + dev->driver->irq_handler = valleyview_irq_handler;
> + dev->driver->irq_preinstall = valleyview_irq_preinstall;
> + dev->driver->irq_postinstall = valleyview_irq_postinstall;
> + dev->driver->irq_uninstall = valleyview_irq_uninstall;
> + dev->driver->enable_vblank = valleyview_enable_vblank;
> + dev->driver->disable_vblank = valleyview_disable_vblank;
> + } else if (IS_IVYBRIDGE(dev)) {
> /* Share pre & uninstall handlers with ILK/SNB */
> dev->driver->irq_handler = ivybridge_irq_handler;
> dev->driver->irq_preinstall = ironlake_irq_preinstall;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index ddd445a..e7fab25 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -510,6 +510,11 @@
> #define IIR 0x020a4
> #define IMR 0x020a8
> #define ISR 0x020ac
> +#define VLV_IIR_RW 0x182084
> +#define VLV_IER 0x1820a0
> +#define VLV_IIR 0x1820a4
> +#define VLV_IMR 0x1820a8
> +#define VLV_ISR 0x1820ac
> #define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
> #define I915_DISPLAY_PORT_INTERRUPT (1<<17)
> #define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
> @@ -2534,7 +2539,7 @@
> #define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL)
> #define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT)
>
> -#define DPFLIPSTAT_VLV 0x70028
> +#define VLV_DPFLIPSTAT 0x70028
> #define PIPEB_LINE_COMPARE_STATUS (1<<29)
> #define PIPEB_HLINE_INT_EN (1<<28)
> #define PIPEB_VBLANK_INT_EN (1<<27)
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index b7b50a5..75081f1 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -687,7 +687,7 @@ render_ring_get_irq(struct intel_ring_buffer *ring)
>
> spin_lock(&ring->irq_lock);
> if (ring->irq_refcount++ == 0) {
> - if (HAS_PCH_SPLIT(dev))
> + if (HAS_PCH_SPLIT(dev) || IS_VALLEYVIEW(dev))
Bikeshed I've just noticed: Imo irq handling is core gt stuff, so makes
sense to check for gen >=5 instead of HAS_PCH_SPLIT (which is just an
output feature). I know, the master irq control is associated with the
display crap, but these functions here just frob around with ring (i.e.
gt) stuff.
-Daniel
> ironlake_enable_irq(dev_priv,
> GT_PIPE_NOTIFY | GT_USER_INTERRUPT);
> else
> @@ -706,7 +706,7 @@ render_ring_put_irq(struct intel_ring_buffer *ring)
>
> spin_lock(&ring->irq_lock);
> if (--ring->irq_refcount == 0) {
> - if (HAS_PCH_SPLIT(dev))
> + if (HAS_PCH_SPLIT(dev) || IS_VALLEYVIEW(dev))
> ironlake_disable_irq(dev_priv,
> GT_USER_INTERRUPT |
> GT_PIPE_NOTIFY);
> --
> 1.7.5.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48
More information about the Intel-gfx
mailing list