[Intel-gfx] HDMI problems when using a A/V receiver
linux at clnt.de
linux at clnt.de
Wed May 2 22:03:03 CEST 2012
Hi
I'm currently using the Intel Core i3 integrated graphics:
[ 68585.994] (II) intel(0): Integrated Graphics Chipset: Intel(R) Clarkdale
I'm running Debian wheezy and I have my system connected via HDMI to my
flatscreen TV. I'm using a resolution of 1280x720 and everything is
working fine:
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 68585.825] X Protocol Version 11, Revision 0
[ 68585.825] Build Operating System: Linux 3.2.0-1-amd64 x86_64 Debian
[ 68585.825] Current Operating System: Linux brian 3.2.0-2-amd64 #1 SMP
Tue Mar 20 18:36:37 UTC 2012 x86_64
[ 68585.825] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64
root=UUID=94a1038c-931b-4cb0-a0bc-2d38d4aafbdf ro drm.debug=0x0e
[ 68585.825] Build Date: 04 March 2012 11:42:13PM
[ 68585.825] xorg-server 2:1.11.4-1 (Cyril Brulebois <kibi at debian.org>)
I have no special xorg.conf but use the automatically calculated config.
Now I want to put a multimedia receiver (Marantz NR1501) inbetween my pc
and the TV but I do not get any picture one my tv anymore as soon as the
i915 driver gets loaded. I tested a lot with different resolutions and
refresh rates but I do not have success :-(
I also tested with my laptop (also i3 graphics) running Ubuntu 10.04 -
the same problem: running fine when directly connected to the TV but no
pictire when the receiver is inbetween. When I run windows on the laptop
everything is working fine! No matter which resolution/refresh rate I
use... So I assume it's a problem with the linux driver for i915.
I did a lot of googleing but wihtout success: The only thing I found was
this blog:
http://software.intel.com/en-us/blogs/2008/04/22/hdcp-hdmi-repeaters-and-you-well-me-anyway/
talking about HDCP problems with windows when repeaters are inbetween
the pc and the TV (the problem descriptions sounds identically to my
problem).
My question is: Is it possible that the i915-driver activates HDCP by
default (by fault)? I was assuming that there is no HDCP under linux...
Or: does anybody have an idea what the problem could be or how I could
locate it?
Best regards,
Joerg
More information about the Intel-gfx
mailing list