[Intel-gfx] [PATCH 8/8] drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set

[Daniel Vetter]

Especially getting rid of all things lvds is ... great!

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 114 +----------------------------------
 1 file changed, 1 insertion(+), 113 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 68c0524..27fc014 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5465,23 +5465,14 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int num_connectors = 0;
-	intel_clock_t clock, reduced_clock;
-	u32 dpll = 0, fp = 0, fp2 = 0;
-	bool ok, has_reduced_clock = false;
-	bool is_lvds = false, is_dp = false, is_cpu_edp = false;
+	bool is_dp = false, is_cpu_edp = false;
 	struct intel_encoder *encoder;
-	u32 temp;
 	int ret;
 	bool dither;
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		switch (encoder->type) {
-		case INTEL_OUTPUT_LVDS:
-			is_lvds = true;
-			break;
 		case INTEL_OUTPUT_DISPLAYPORT:
-			is_dp = true;
-			break;
 		case INTEL_OUTPUT_EDP:
 			is_dp = true;
 			if (!intel_encoder_is_pch_edp(&encoder->base))
@@ -5512,93 +5503,15 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
 		return -EINVAL;
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
-					     &has_reduced_clock,
-					     &reduced_clock);
-		if (!ok) {
-			DRM_ERROR("Couldn't find PLL settings for mode!\n");
-			return -EINVAL;
-		}
-	}
-
 	/* Ensure that the cursor is valid for the new mode before changing... */
 	intel_crtc_update_cursor(crtc, true);
 
 	/* determine panel color depth */
 	dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp, mode);
-	if (is_lvds && dev_priv->lvds_dither)
-		dither = true;
 
 	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
 	drm_mode_debug_printmodeline(mode);
 
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
-		if (has_reduced_clock)
-			fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
-			      reduced_clock.m2;
-
-		dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
-					     fp);
-
-		/* CPU eDP is the only output that doesn't need a PCH PLL of its
-		 * own on pre-Haswell/LPT generation */
-		if (!is_cpu_edp) {
-			struct intel_pch_pll *pll;
-
-			pll = intel_get_pch_pll(intel_crtc, dpll, fp);
-			if (pll == NULL) {
-				DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
-						 pipe);
-				return -EINVAL;
-			}
-		} else
-			intel_put_pch_pll(intel_crtc);
-
-		/* The LVDS pin pair needs to be on before the DPLLs are
-		 * enabled.  This is an exception to the general rule that
-		 * mode_set doesn't turn things on.
-		 */
-		if (is_lvds) {
-			temp = I915_READ(PCH_LVDS);
-			temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
-			if (HAS_PCH_CPT(dev)) {
-				temp &= ~PORT_TRANS_SEL_MASK;
-				temp |= PORT_TRANS_SEL_CPT(pipe);
-			} else {
-				if (pipe == 1)
-					temp |= LVDS_PIPEB_SELECT;
-				else
-					temp &= ~LVDS_PIPEB_SELECT;
-			}
-
-			/* set the corresponsding LVDS_BORDER bit */
-			temp |= dev_priv->lvds_border_bits;
-			/* Set the B0-B3 data pairs corresponding to whether
-			 * we're going to set the DPLLs for dual-channel mode or
-			 * not.
-			 */
-			if (clock.p2 == 7)
-				temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
-			else
-				temp &= ~(LVDS_B0B3_POWER_UP |
-					  LVDS_CLKB_POWER_UP);
-
-			/* It would be nice to set 24 vs 18-bit mode
-			 * (LVDS_A3_POWER_UP) appropriately here, but we need to
-			 * look more thoroughly into how panels behave in the
-			 * two modes.
-			 */
-			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
-			if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
-				temp |= LVDS_HSYNC_POLARITY;
-			if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
-				temp |= LVDS_VSYNC_POLARITY;
-			I915_WRITE(PCH_LVDS, temp);
-		}
-	}
-
 	if (is_dp && !is_cpu_edp) {
 		intel_dp_set_m_n(crtc, mode, adjusted_mode);
 	} else {
@@ -5613,31 +5526,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	intel_crtc->lowfreq_avail = false;
-	if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
-		if (intel_crtc->pch_pll) {
-			I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-
-			/* Wait for the clocks to stabilize. */
-			POSTING_READ(intel_crtc->pch_pll->pll_reg);
-			udelay(150);
-
-			/* The pixel multiplier can only be updated once the
-			 * DPLL is enabled and the clocks are stable.
-			 *
-			 * So write it again.
-			 */
-			I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
-		}
-
-		if (intel_crtc->pch_pll) {
-			if (is_lvds && has_reduced_clock && i915_powersave) {
-				I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
-				intel_crtc->lowfreq_avail = true;
-			} else {
-				I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
-			}
-		}
-	}
 
 	intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
 
-- 
1.7.11.7