[Intel-gfx] [PATCH] drm/i915: update VLV PLL and DPIO code v11
Jesse Barnes
jbarnes at virtuousgeek.org
Thu Apr 18 23:51:36 CEST 2013
In Valleyview voltage swing, pre-emphasis and lane control registers can
be programmed only through the h/w side band fabric. Update
vlv_update_pll, i9xx_crtc_enable, and intel_enable_pll with the
appropriate programming.
We need to make sure that the tx lane reset occurs in both the full mode
set and DPMS paths, so factor things out to allow that.
v2: use different DPIO_DIVISOR values for VGA and DisplayPort
v3: Fix update pll logic to use same DPIO_DIVISOR & DPIO_REFSFR values
for all display interfaces
v4: collapse with various updates
v5: squash with crtc enable/pll enable bits
v6: split out DP code (jbarnes)
put phyready check under IS_VALLEYVIEW (jbarnes)
remove unneeded check in 9xx pll div update (Jani)
wrap VLV pll update call in IS_VALLEYVIEW (Jani)
move port enable back to end of crtc enable (jbarnes)
put phyready check under IS_VALLEYVIEW (jbarnes)
v7: fix up conflicts against latest drm-intel-next-queued
v8: use DPIO reg names, fix pipes (Jani)
from mPhy_registers_VLV2_ww20p5 doc
v9: update to latest info from driver enabling notes doc
driver_vbios_notes_9
v10: fixup a bit of pipe/port confusion to allow eDP and HDMI to work
simultaneously (Jesse)
v11: use pll/port callbacks for DPIO port activity (Daniel)
use separate VLV CRTC enable function (Daniel)
move around port ready checks (Jesse)
Signed-off-by: Pallavi G <pallavi.g at intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
Signed-off-by: Gajanan Bhat <gajanan.bhat at intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky at intel.com>
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/i915_reg.h | 118 +++++++++++++++-
drivers/gpu/drm/i915/intel_display.c | 256 ++++++++++++++++++++++++++--------
drivers/gpu/drm/i915/intel_dp.c | 69 ++++++++-
drivers/gpu/drm/i915/intel_drv.h | 14 ++
drivers/gpu/drm/i915/intel_hdmi.c | 108 ++++++++++++++
5 files changed, 502 insertions(+), 63 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 66fb8dd..fb1a4fa 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -353,6 +353,8 @@
* 0x8100: fast clock controls
*
* DPIO is VLV only.
+ *
+ * Note: digital port B is DDI0, digital pot C is DDI1
*/
#define DPIO_PKT (VLV_DISPLAY_BASE + 0x2100)
#define DPIO_RID (0<<24)
@@ -369,8 +371,20 @@
#define DPIO_SFR_BYPASS (1<<1)
#define DPIO_RESET (1<<0)
+#define _DPIO_TX3_SWING_CTL4_A 0x690
+#define _DPIO_TX3_SWING_CTL4_B 0x2a90
+#define DPIO_TX3_SWING_CTL4(pipe) _PIPE(pipe, _DPIO_TX_SWING_CTL4_A, \
+ _DPIO_TX3_SWING_CTL4_B)
+
+/*
+ * Per pipe/PLL DPIO regs
+ */
#define _DPIO_DIV_A 0x800c
#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */
+#define DPIO_POST_DIV_DAC 0
+#define DPIO_POST_DIV_HDMIDP 1 /* DAC 225-400M rate */
+#define DPIO_POST_DIV_LVDS1 2
+#define DPIO_POST_DIV_LVDS2 3
#define DPIO_K_SHIFT (24) /* 4 bits */
#define DPIO_P1_SHIFT (21) /* 3 bits */
#define DPIO_P2_SHIFT (16) /* 5 bits */
@@ -396,14 +410,111 @@
#define _DPIO_CORE_CLK_B 0x803c
#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B)
+#define _DPIO_IREF_CTL_A 0x8040
+#define _DPIO_IREF_CTL_B 0x8060
+#define DPIO_IREF_CTL(pipe) _PIPE(pipe, _DPIO_IREF_CTL_A, _DPIO_IREF_CTL_B)
+
+#define DPIO_IREF_BCAST 0xc044
+#define _DPIO_IREF_A 0x8044
+#define _DPIO_IREF_B 0x8064
+#define DPIO_IREF(pipe) _PIPE(pipe, _DPIO_IREF_A, _DPIO_IREF_B)
+
+#define _DPIO_PLL_CML_A 0x804c
+#define _DPIO_PLL_CML_B 0x806c
+#define DPIO_PLL_CML(pipe) _PIPE(pipe, _DPIO_PLL_CML_A, _DPIO_PLL_CML_B)
+
#define _DPIO_LFP_COEFF_A 0x8048
#define _DPIO_LFP_COEFF_B 0x8068
#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B)
+#define DPIO_CALIBRATION 0x80ac
+
#define DPIO_FASTCLK_DISABLE 0x8100
-#define DPIO_DATA_CHANNEL1 0x8220
-#define DPIO_DATA_CHANNEL2 0x8420
+/*
+ * Per DDI channel DPIO regs
+ */
+
+#define _DPIO_PCS_TX_0 0x8200
+#define _DPIO_PCS_TX_1 0x8400
+#define DPIO_PCS_TX_LANE2_RESET (1<<16)
+#define DPIO_PCS_TX_LANE1_RESET (1<<7)
+#define DPIO_PCS_TX(port) _PORT(port, _DPIO_PCS_TX_0, _DPIO_PCS_TX_1)
+
+#define _DPIO_PCS_CLK_0 0x8204
+#define _DPIO_PCS_CLK_1 0x8404
+#define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22)
+#define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21)
+#define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6)
+#define DPIO_PCS_CLK_SOFT_RESET (1<<5)
+#define DPIO_PCS_CLK(port) _PORT(port, _DPIO_PCS_CLK_0, _DPIO_PCS_CLK_1)
+
+#define _DPIO_PCS_CTL_OVR1_A 0x8224
+#define _DPIO_PCS_CTL_OVR1_B 0x8424
+#define DPIO_PCS_CTL_OVER1(port) _PORT(port, _DPIO_PCS_CTL_OVR1_A, \
+ _DPIO_PCS_CTL_OVR1_B)
+
+#define _DPIO_PCS_STAGGER0_A 0x822c
+#define _DPIO_PCS_STAGGER0_B 0x842c
+#define DPIO_PCS_STAGGER0(port) _PORT(port, _DPIO_PCS_STAGGER0_A, \
+ _DPIO_PCS_STAGGER0_B)
+
+#define _DPIO_PCS_STAGGER1_A 0x8230
+#define _DPIO_PCS_STAGGER1_B 0x8430
+#define DPIO_PCS_STAGGER1(port) _PORT(port, _DPIO_PCS_STAGGER1_A, \
+ _DPIO_PCS_STAGGER1_B)
+
+#define _DPIO_PCS_CLOCKBUF0_A 0x8238
+#define _DPIO_PCS_CLOCKBUF0_B 0x8438
+#define DPIO_PCS_CLOCKBUF0(port) _PORT(port, _DPIO_PCS_CLOCKBUF0_A, \
+ _DPIO_PCS_CLOCKBUF0_B)
+
+#define _DPIO_PCS_CLOCKBUF8_A 0x825c
+#define _DPIO_PCS_CLOCKBUF8_B 0x845c
+#define DPIO_PCS_CLOCKBUF8(port) _PORT(port, _DPIO_PCS_CLOCKBUF8_A, \
+ _DPIO_PCS_CLOCKBUF8_B)
+
+#define _DPIO_TX_SWING_CTL2_A 0x8288
+#define _DPIO_TX_SWING_CTL2_B 0x8488
+#define DPIO_TX_SWING_CTL2(port) _PORT(port, _DPIO_TX_SWING_CTL2_A, \
+ _DPIO_TX_SWING_CTL2_B)
+
+#define _DPIO_TX_SWING_CTL3_A 0x828c
+#define _DPIO_TX_SWING_CTL3_B 0x848c
+#define DPIO_TX_SWING_CTL3(port) _PORT(port, _DPIO_TX_SWING_CTL3_A, \
+ _DPIO_TX_SWING_CTL3_B)
+
+#define _DPIO_TX_SWING_CTL4_A 0x8290
+#define _DPIO_TX_SWING_CTL4_B 0x8490
+#define DPIO_TX_SWING_CTL4(port) _PORT(port, _DPIO_TX_SWING_CTL4_A, \
+ _DPIO_TX_SWING_CTL4_B)
+
+#define _DPIO_TX_OCALINIT_0 0x8294
+#define _DPIO_TX_OCALINIT_1 0x8494
+#define DPIO_TX_OCALINIT_EN (1<<31)
+#define DPIO_TX_OCALINIT(port) _PORT(port, _DPIO_TX_OCALINIT_0, \
+ _DPIO_TX_OCALINIT_1)
+
+#define _DPIO_TX_CTL_0 0x82ac
+#define _DPIO_TX_CTL_1 0x84ac
+#define DPIO_TX_CTL(port) _PORT(port, _DPIO_TX_CTL_0, _DPIO_TX_CTL_1)
+
+#define _DPIO_TX_LANE_0 0x82b8
+#define _DPIO_TX_LANE_1 0x84b8
+#define DPIO_TX_LANE(port) _PORT(port, _DPIO_TX_LANE_0, _DPIO_TX_LANE_1)
+
+#define _DPIO_DATA_CHANNEL1 0x8220
+#define _DPIO_DATA_CHANNEL2 0x8420
+#define DPIO_DATA_CHANNEL(port) _PORT(port, _DPIO_DATA_CHANNEL1, _DPIO_DATA_CHANNEL2)
+
+#define _DPIO_PORT0_PCS0 0x0220
+#define _DPIO_PORT0_PCS1 0x0420
+#define _DPIO_PORT1_PCS2 0x2620
+#define _DPIO_PORT1_PCS3 0x2820
+#define DPIO_DATA_LANE_A(port) _PORT(port, _DPIO_PORT0_PCS0, _DPIO_PORT1_PCS2)
+#define DPIO_DATA_LANE_B(port) _PORT(port, _DPIO_PORT0_PCS1, _DPIO_PORT1_PCS3)
+#define DPIO_DATA_CHANNEL1 0x8220
+#define DPIO_DATA_CHANNEL2 0x8420
/*
* Fence registers
@@ -965,7 +1076,10 @@
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
#define DPLL_LOCK_VLV (1<<15)
+#define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14)
#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
+#define DPLL_PORTC_READY_MASK (0xf << 4)
+#define DPLL_PORTB_READY_MASK (0xf)
#define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
/*
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a31c59e..421cd3b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1576,6 +1576,20 @@ intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
return I915_READ(SBI_DATA);
}
+void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
+{
+ u32 port_mask;
+
+ if (!port)
+ port_mask = DPLL_PORTB_READY_MASK;
+ else
+ port_mask = DPLL_PORTC_READY_MASK;
+
+ if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
+ WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
+ 'B' + port, I915_READ(DPLL(0)));
+}
+
/**
* ironlake_enable_pch_pll - enable PCH PLL
* @dev_priv: i915 private structure
@@ -3678,6 +3692,68 @@ g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe)
}
}
+static void valleyview_crtc_enable(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+
+ WARN_ON(!crtc->enabled);
+
+ if (intel_crtc->active)
+ return;
+
+ intel_crtc->active = true;
+ intel_update_watermarks(dev);
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->pre_pll_enable)
+ encoder->pre_pll_enable(encoder);
+
+ intel_enable_pll(dev_priv, pipe);
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->pre_enable)
+ encoder->pre_enable(encoder);
+
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ encoder->enable(encoder);
+
+ /* Enable panel fitting for eDP */
+ if (dev_priv->pfit_control &&
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ dev_priv->pfit_control,
+ dev_priv->pfit_pgm_ratios);
+
+ I915_WRITE(PFIT_PGM_RATIOS, dev_priv->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, dev_priv->pfit_control);
+ }
+
+ intel_enable_pipe(dev_priv, pipe, false);
+ intel_enable_plane(dev_priv, plane, pipe);
+
+ intel_crtc_load_lut(crtc);
+ intel_update_fbc(dev);
+
+ /* Give the overlay scaler a chance to enable if it's on this pipe */
+ intel_crtc_dpms_overlay(intel_crtc, true);
+ intel_crtc_update_cursor(crtc, true);
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
static void i9xx_crtc_enable(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -3784,6 +3860,10 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
i9xx_pfit_disable(intel_crtc);
+ for_each_encoder_on_crtc(dev, crtc, encoder)
+ if (encoder->post_disable)
+ encoder->post_disable(encoder);
+
intel_disable_pll(dev_priv, pipe);
intel_crtc->active = false;
@@ -4226,6 +4306,34 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
}
}
+static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv)
+{
+ u32 reg_val;
+
+ /*
+ * PLLB opamp always calibrates to max value of 0x3f, force enable it
+ * and set it to a reasonable value instead.
+ */
+ reg_val = intel_dpio_read(dev_priv, DPIO_IREF(1));
+ reg_val &= 0xffffff00;
+ reg_val |= 0x00000030;
+ intel_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
+
+ reg_val = intel_dpio_read(dev_priv, DPIO_CALIBRATION);
+ reg_val &= 0x8cffffff;
+ reg_val = 0x8c000000;
+ intel_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
+
+ reg_val = intel_dpio_read(dev_priv, DPIO_IREF(1));
+ reg_val &= 0xffffff00;
+ intel_dpio_write(dev_priv, DPIO_IREF(1), reg_val);
+
+ reg_val = intel_dpio_read(dev_priv, DPIO_CALIBRATION);
+ reg_val &= 0x00ffffff;
+ reg_val |= 0xb0000000;
+ intel_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val);
+}
+
static void intel_dp_set_m_n(struct intel_crtc *crtc)
{
if (crtc->config.has_pch_encoder)
@@ -4238,24 +4346,18 @@ static void vlv_update_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_display_mode *adjusted_mode =
+ &crtc->config.adjusted_mode;
+ struct intel_encoder *encoder;
int pipe = crtc->pipe;
- u32 dpll, mdiv, pdiv;
+ u32 dpll, mdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
- bool is_sdvo;
- u32 temp;
+ bool is_hdmi;
+ u32 coreclk, reg_val, temp;
mutex_lock(&dev_priv->dpio_lock);
- is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) ||
- intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
-
- dpll = DPLL_VGA_MODE_DIS;
- dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
- dpll |= DPLL_REFA_CLK_ENABLE_VLV;
- dpll |= DPLL_INTEGRATED_CLOCK_VLV;
-
- I915_WRITE(DPLL(pipe), dpll);
- POSTING_READ(DPLL(pipe));
+ is_hdmi = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI);
bestn = crtc->config.dpll.n;
bestm1 = crtc->config.dpll.m1;
@@ -4263,71 +4365,105 @@ static void vlv_update_pll(struct intel_crtc *crtc)
bestp1 = crtc->config.dpll.p1;
bestp2 = crtc->config.dpll.p2;
- /*
- * In Valleyview PLL and program lane counter registers are exposed
- * through DPIO interface
- */
+ /* See eDP HDMI DPIO driver vbios notes doc */
+
+ /* PLL B needs special handling */
+ if (pipe)
+ vlv_pllb_recal_opamp(dev_priv);
+
+ /* Set up Tx target for periodic Rcomp update */
+ intel_dpio_write(dev_priv, DPIO_IREF_BCAST, 0x0100000f);
+
+ /* Disable target IRef on PLL */
+ reg_val = intel_dpio_read(dev_priv, DPIO_IREF_CTL(pipe));
+ reg_val &= 0x00ffffff;
+ intel_dpio_write(dev_priv, DPIO_IREF_CTL(pipe), reg_val);
+
+ /* Disable fast lock */
+ intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x610);
+
+ /* Set idtafcrecal before PLL is enabled */
mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
mdiv |= ((bestn << DPIO_N_SHIFT));
- mdiv |= (1 << DPIO_POST_DIV_SHIFT);
mdiv |= (1 << DPIO_K_SHIFT);
- mdiv |= DPIO_ENABLE_CALIBRATION;
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT))
+ mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
- intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
+ mdiv |= DPIO_ENABLE_CALIBRATION;
+ intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv);
- pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
- (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
- (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
- (5 << DPIO_CLK_BIAS_CTL_SHIFT);
- intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
+ /* Set HBR and RBR LPF coefficients */
+ if (adjusted_mode->clock == 162000 ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI))
+ intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
+ 0x005f0021);
+ else
+ intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe),
+ 0x00d0000f);
+
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) {
+ /* Use SSC source */
+ if (!pipe)
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df40000);
+ else
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df70000);
+ } else { /* HDMI or VGA */
+ /* Use bend source */
+ if (!pipe)
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df70000);
+ else
+ intel_dpio_write(dev_priv, DPIO_REFSFR(pipe),
+ 0x0df40000);
+ }
- intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
+ coreclk = intel_dpio_read(dev_priv, DPIO_CORE_CLK(pipe));
+ coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
+ if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) ||
+ intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))
+ coreclk |= 0x01000000;
+ intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), coreclk);
- dpll |= DPLL_VCO_ENABLE;
- I915_WRITE(DPLL(pipe), dpll);
- POSTING_READ(DPLL(pipe));
- if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
- DRM_ERROR("DPLL %d failed to lock\n", pipe);
+ intel_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000);
- intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ if (encoder->pre_pll_enable)
+ encoder->pre_pll_enable(encoder);
- if (crtc->config.has_dp_encoder)
- intel_dp_set_m_n(crtc);
+ /* Enable DPIO clock input */
+ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
+ DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
+ if (pipe)
+ dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+ dpll |= DPLL_VCO_ENABLE;
I915_WRITE(DPLL(pipe), dpll);
-
- /* Wait for the clocks to stabilize. */
POSTING_READ(DPLL(pipe));
udelay(150);
- temp = 0;
- if (is_sdvo) {
+ if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+ DRM_ERROR("DPLL %d failed to lock\n", pipe);
+
+ if (is_hdmi) {
temp = 0;
if (crtc->config.pixel_multiplier > 1) {
temp = (crtc->config.pixel_multiplier - 1)
<< DPLL_MD_UDI_MULTIPLIER_SHIFT;
}
- }
- I915_WRITE(DPLL_MD(pipe), temp);
- POSTING_READ(DPLL_MD(pipe));
- /* Now program lane control registers */
- if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)
- || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) {
- temp = 0x1000C4;
- if(pipe == 1)
- temp |= (1 << 21);
- intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
+ I915_WRITE(DPLL_MD(pipe), temp);
+ POSTING_READ(DPLL_MD(pipe));
}
- if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) {
- temp = 0x1000C4;
- if(pipe == 1)
- temp |= (1 << 21);
- intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
- }
+ if (crtc->config.has_dp_encoder)
+ intel_dp_set_m_n(crtc);
mutex_unlock(&dev_priv->dpio_lock);
}
@@ -4717,7 +4853,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
else
i9xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
- num_connectors);
+ num_connectors);
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
@@ -8771,6 +8907,13 @@ static void intel_init_display(struct drm_device *dev)
dev_priv->display.crtc_disable = ironlake_crtc_disable;
dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
+ } else if (IS_VALLEYVIEW(dev)) {
+ dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
+ dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+ dev_priv->display.crtc_enable = valleyview_crtc_enable;
+ dev_priv->display.crtc_disable = i9xx_crtc_disable;
+ dev_priv->display.off = i9xx_crtc_off;
+ dev_priv->display.update_plane = i9xx_update_plane;
} else {
dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
@@ -9436,9 +9579,6 @@ void intel_modeset_cleanup(struct drm_device *dev)
ironlake_teardown_rc6(dev);
- if (IS_VALLEYVIEW(dev))
- vlv_init_dpio(dev);
-
mutex_unlock(&dev->struct_mutex);
/* Disable the irq before mode object teardown, for the irq might
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5a73fc6..4026ba2 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1396,15 +1396,77 @@ static void intel_enable_dp(struct intel_encoder *encoder)
ironlake_edp_panel_vdd_off(intel_dp, true);
intel_dp_complete_link_train(intel_dp);
ironlake_edp_backlight_on(intel_dp);
+
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_digital_port *dport =
+ enc_to_dig_port(&encoder->base);
+ int channel = vlv_dport_to_channel(dport);
+
+ vlv_wait_port_ready(dev_priv, channel);
+ }
}
static void intel_pre_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
if (is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev))
ironlake_edp_pll_on(intel_dp);
+
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ int port = vlv_dport_to_channel(dport);
+ int pipe = intel_crtc->pipe;
+ u32 val;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+ val = intel_dpio_read(dev_priv, DPIO_DATA_LANE_A(port));
+ val = 0;
+ if (pipe)
+ val |= (1<<21);
+ else
+ val &= ~(1<<21);
+ val |= 0x001000c4;
+ intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL(port), val);
+
+ intel_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF0(port),
+ 0x00760018);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF8(port),
+ 0x00400888);
+ }
+}
+
+static void intel_dp_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int port = vlv_dport_to_channel(dport);
+
+ if (!IS_VALLEYVIEW(dev))
+ return;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+ /* Program Tx lane resets to default */
+ intel_dpio_write(dev_priv, DPIO_PCS_TX(port),
+ DPIO_PCS_TX_LANE2_RESET |
+ DPIO_PCS_TX_LANE1_RESET);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLK(port),
+ DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
+ DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
+ (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
+ DPIO_PCS_CLK_SOFT_RESET);
+
+ /* Fix up inter-pair skew failure */
+ intel_dpio_write(dev_priv, DPIO_PCS_STAGGER1(port), 0x00750f00);
+ intel_dpio_write(dev_priv, DPIO_TX_CTL(port), 0x00001500);
+ intel_dpio_write(dev_priv, DPIO_TX_LANE(port), 0x40400000);
}
/*
@@ -1548,6 +1610,8 @@ static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
else
BUG();
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPHASIS_0:
preemph_reg_value = 0x0004000;
@@ -1621,8 +1685,6 @@ static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
return 0;
}
- /* eDP is only on port C */
- mutex_lock(&dev_priv->dpio_lock);
intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0x00000000);
intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL4(port), demph_reg_value);
intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL2(port),
@@ -1631,7 +1693,6 @@ static uint32_t intel_vlv_signal_levels(struct intel_dp *intel_dp)
intel_dpio_write(dev_priv, DPIO_PCS_STAGGER0(port), 0x00030000);
intel_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port), preemph_reg_value);
intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0x80000000);
- mutex_unlock(&dev_priv->dpio_lock);
return 0;
}
@@ -3084,6 +3145,8 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
intel_encoder->disable = intel_disable_dp;
intel_encoder->post_disable = intel_post_disable_dp;
intel_encoder->get_hw_state = intel_dp_get_hw_state;
+ if (IS_VALLEYVIEW(dev))
+ intel_encoder->pre_pll_enable = intel_dp_pre_pll_enable;
intel_dig_port->port = port;
intel_dig_port->dp.output_reg = output_reg;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index c0c5ce0..4bdca14 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -431,6 +431,19 @@ struct intel_digital_port {
struct intel_hdmi hdmi;
};
+static inline int
+vlv_dport_to_channel(struct intel_digital_port *dport)
+{
+ switch (dport->port) {
+ case PORT_B:
+ return 0;
+ case PORT_C:
+ return 1;
+ default:
+ BUG();
+ }
+}
+
static inline struct drm_crtc *
intel_get_crtc_for_pipe(struct drm_device *dev, int pipe)
{
@@ -610,6 +623,7 @@ intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
extern void intel_wait_for_pipe_off(struct drm_device *dev, int pipe);
extern int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
+extern void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port);
struct intel_load_detect_pipe {
struct drm_framebuffer *release_fb;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 3e6a3ef..6b8e167 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -697,6 +697,14 @@ static void intel_enable_hdmi(struct intel_encoder *encoder)
I915_WRITE(intel_hdmi->hdmi_reg, temp);
POSTING_READ(intel_hdmi->hdmi_reg);
}
+
+ if (IS_VALLEYVIEW(dev)) {
+ struct intel_digital_port *dport =
+ enc_to_dig_port(&encoder->base);
+ int channel = vlv_dport_to_channel(dport);
+
+ vlv_wait_port_ready(dev_priv, channel);
+ }
}
static void intel_disable_hdmi(struct intel_encoder *encoder)
@@ -947,6 +955,101 @@ done:
return 0;
}
+static void intel_hdmi_pre_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ int port = vlv_dport_to_channel(dport);
+ int pipe = intel_crtc->pipe;
+ u32 val;
+
+ if (!IS_VALLEYVIEW(dev))
+ return;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+ /* Enable clock channels for this port */
+ val = intel_dpio_read(dev_priv, DPIO_DATA_LANE_A(port));
+ val = 0;
+ if (pipe)
+ val |= (1<<21);
+ else
+ val &= ~(1<<21);
+ val |= 0x001000c4;
+ intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL(port), val);
+
+ /* HDMI 1.0V-2dB */
+ intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port), 0);
+ intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL4(port),
+ 0x2b245f5f);
+ intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL2(port),
+ 0x5578b83a);
+ intel_dpio_write(dev_priv, DPIO_TX_SWING_CTL3(port),
+ 0x0c782040);
+ intel_dpio_write(dev_priv, DPIO_TX3_SWING_CTL4(port),
+ 0x2b247878);
+ intel_dpio_write(dev_priv, DPIO_PCS_STAGGER0(port), 0x00030000);
+ intel_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port),
+ 0x00002000);
+ intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port),
+ DPIO_TX_OCALINIT_EN);
+
+ /* Program lane clock */
+ intel_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF0(port),
+ 0x00760018);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLOCKBUF8(port),
+ 0x00400888);
+}
+
+void intel_hdmi_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int port = vlv_dport_to_channel(dport);
+
+ if (!IS_VALLEYVIEW(dev))
+ return;
+
+ WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
+
+ /* Program Tx lane resets to default */
+ intel_dpio_write(dev_priv, DPIO_PCS_TX(port),
+ DPIO_PCS_TX_LANE2_RESET |
+ DPIO_PCS_TX_LANE1_RESET);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLK(port),
+ DPIO_PCS_CLK_CRI_RXEB_EIOS_EN |
+ DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN |
+ (1<<DPIO_PCS_CLK_DATAWIDTH_SHIFT) |
+ DPIO_PCS_CLK_SOFT_RESET);
+
+ /* Fix up inter-pair skew failure */
+ intel_dpio_write(dev_priv, DPIO_PCS_STAGGER1(port), 0x00750f00);
+ intel_dpio_write(dev_priv, DPIO_TX_CTL(port), 0x00001500);
+ intel_dpio_write(dev_priv, DPIO_TX_LANE(port), 0x40400000);
+
+ intel_dpio_write(dev_priv, DPIO_PCS_CTL_OVER1(port),
+ 0x00002000);
+ intel_dpio_write(dev_priv, DPIO_TX_OCALINIT(port),
+ DPIO_TX_OCALINIT_EN);
+}
+
+void intel_hdmi_post_disable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ int port = vlv_dport_to_channel(dport);
+
+ /* Reset lanes to avoid HDMI flicker (VLV w/a) */
+ mutex_lock(&dev_priv->dpio_lock);
+ intel_dpio_write(dev_priv, DPIO_PCS_TX(port), 0x00000000);
+ intel_dpio_write(dev_priv, DPIO_PCS_CLK(port), 0x00e00060);
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
static void intel_hdmi_destroy(struct drm_connector *connector)
{
drm_sysfs_connector_remove(connector);
@@ -1086,6 +1189,11 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
intel_encoder->enable = intel_enable_hdmi;
intel_encoder->disable = intel_disable_hdmi;
intel_encoder->get_hw_state = intel_hdmi_get_hw_state;
+ if (IS_VALLEYVIEW(dev)) {
+ intel_encoder->pre_enable = intel_hdmi_pre_enable;
+ intel_encoder->pre_pll_enable = intel_hdmi_pre_pll_enable;
+ intel_encoder->post_disable = intel_hdmi_post_disable;
+ }
intel_encoder->type = INTEL_OUTPUT_HDMI;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
--
1.7.10.4
More information about the Intel-gfx
mailing list