[Intel-gfx] [PATCH 11/17] drm/i915: Add ILK support to intel_read_wm_latency

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

ILK has a slightly different way to read out the watermark
latency values. On ILK the LP0 latenciy values are in fact
not stored in any register, and instead we must use fixed
values.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index a399ee9..5948f4c 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2357,6 +2357,13 @@ static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[5])
 		wm[1] = (sskpd >> SSKPD_WM1_SHIFT) & SSKPD_WM_MASK;
 		wm[2] = (sskpd >> SSKPD_WM2_SHIFT) & SSKPD_WM_MASK;
 		wm[3] = (sskpd >> SSKPD_WM3_SHIFT) & SSKPD_WM_MASK;
+	} else if (INTEL_INFO(dev)->gen >= 5) {
+		uint32_t mltr = I915_READ(MLTR_ILK);
+
+		/* ILK primary LP0 latency is 700 ns */
+		wm[0] = 7;
+		wm[1] = (mltr >> MLTR_WM1_SHIFT) & ILK_SRLT_MASK;
+		wm[2] = (mltr >> MLTR_WM2_SHIFT) & ILK_SRLT_MASK;
 	}
 }
 
-- 
1.8.1.5