[Intel-gfx] [PATCH] drm/i915: Adjust available RPS information through sysfs for vlv

Chris Wilson chris at chris-wilson.co.uk
Mon Aug 26 17:18:54 CEST 2013


Valleyview has its own render power state implementation with different
capability knobs - it has no RP0,RP1,RPn but rather RPe.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67734
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Tested-by: kobe.qin at intel.com
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/i915_sysfs.c |   36 +++++++++++++++++++++++++++++++-----
 1 file changed, 31 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
index a777e7f..c8c4112 100644
--- a/drivers/gpu/drm/i915/i915_sysfs.c
+++ b/drivers/gpu/drm/i915/i915_sysfs.c
@@ -224,6 +224,18 @@ static ssize_t gt_cur_freq_mhz_show(struct device *kdev,
 	return snprintf(buf, PAGE_SIZE, "%d\n", ret);
 }
 
+static ssize_t vlv_rpe_freq_mhz_show(struct device *kdev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
+	struct drm_device *dev = minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			vlv_gpu_freq(dev_priv->mem_freq,
+				     dev_priv->rps.rpe_delay));
+}
+
 static ssize_t gt_max_freq_mhz_show(struct device *kdev, struct device_attribute *attr, char *buf)
 {
 	struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
@@ -366,6 +378,7 @@ static DEVICE_ATTR(gt_cur_freq_mhz, S_IRUGO, gt_cur_freq_mhz_show, NULL);
 static DEVICE_ATTR(gt_max_freq_mhz, S_IRUGO | S_IWUSR, gt_max_freq_mhz_show, gt_max_freq_mhz_store);
 static DEVICE_ATTR(gt_min_freq_mhz, S_IRUGO | S_IWUSR, gt_min_freq_mhz_show, gt_min_freq_mhz_store);
 
+static DEVICE_ATTR(vlv_rpe_freq_mhz, S_IRUGO, vlv_rpe_freq_mhz_show, NULL);
 
 static ssize_t gt_rp_mhz_show(struct device *kdev, struct device_attribute *attr, char *buf);
 static DEVICE_ATTR(gt_RP0_freq_mhz, S_IRUGO, gt_rp_mhz_show, NULL);
@@ -409,6 +422,14 @@ static const struct attribute *gen6_attrs[] = {
 	NULL,
 };
 
+static const struct attribute *vlv_attrs[] = {
+	&dev_attr_gt_cur_freq_mhz.attr,
+	&dev_attr_gt_max_freq_mhz.attr,
+	&dev_attr_gt_min_freq_mhz.attr,
+	&dev_attr_vlv_rpe_freq_mhz.attr,
+	NULL,
+};
+
 static ssize_t error_state_read(struct file *filp, struct kobject *kobj,
 				struct bin_attribute *attr, char *buf,
 				loff_t off, size_t count)
@@ -492,11 +513,13 @@ void i915_setup_sysfs(struct drm_device *dev)
 			DRM_ERROR("l3 parity sysfs setup failed\n");
 	}
 
-	if (INTEL_INFO(dev)->gen >= 6) {
+	ret = 0;
+	if (IS_VALLEYVIEW(dev))
+		ret = sysfs_create_files(&dev->primary->kdev.kobj, vlv_attrs);
+	else if (INTEL_INFO(dev)->gen >= 6)
 		ret = sysfs_create_files(&dev->primary->kdev.kobj, gen6_attrs);
-		if (ret)
-			DRM_ERROR("gen6 sysfs setup failed\n");
-	}
+	if (ret)
+		DRM_ERROR("RPS sysfs setup failed\n");
 
 	ret = sysfs_create_bin_file(&dev->primary->kdev.kobj,
 				    &error_state_attr);
@@ -507,7 +530,10 @@ void i915_setup_sysfs(struct drm_device *dev)
 void i915_teardown_sysfs(struct drm_device *dev)
 {
 	sysfs_remove_bin_file(&dev->primary->kdev.kobj, &error_state_attr);
-	sysfs_remove_files(&dev->primary->kdev.kobj, gen6_attrs);
+	if (IS_VALLEYVIEW(dev))
+		sysfs_remove_files(&dev->primary->kdev.kobj, vlv_attrs);
+	else
+		sysfs_remove_files(&dev->primary->kdev.kobj, gen6_attrs);
 	device_remove_bin_file(&dev->primary->kdev,  &dpf_attrs);
 #ifdef CONFIG_PM
 	sysfs_unmerge_group(&dev->primary->kdev.kobj, &rc6_attr_group);
-- 
1.7.9.5




More information about the Intel-gfx mailing list