[Intel-gfx] [PATCH 09/15] drm/i915: add VLV DSI PLL Calculations
Jani Nikula
jani.nikula at intel.com
Tue Aug 27 22:40:56 CEST 2013
From: ymohanma <yogesh.mohan.marimuthu at intel.com>
v2:
- Grab dpio_lock mutex in vlv_enable_dsi_pll().
- Add and call vlv_disable_dsi_pll().
v3: Mostly based on Ville's review comments.
- Only pipe A has DSI PLL lock bit.
- Add more of CCK REG bit definitions for DSI PLL.
- Make tables static.
- Move clock gating out of the clock calculation functions.
- DSI PLL LDO power gating.
- Put alternative MNP from table calc behind #ifdef.
v4: s/CKK/CLK/ in the CCK REG bit definitions (Ville).
Signed-off-by: ymohanma <yogesh.mohan.marimuthu at intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/i915_reg.h | 32 ++++
drivers/gpu/drm/i915/intel_dsi.c | 7 +
drivers/gpu/drm/i915/intel_dsi.h | 3 +
drivers/gpu/drm/i915/intel_dsi_pll.c | 317 ++++++++++++++++++++++++++++++++++
5 files changed, 360 insertions(+)
create mode 100644 drivers/gpu/drm/i915/intel_dsi_pll.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 5864c5b..65e60d2 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -23,6 +23,7 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o \
intel_lvds.o \
intel_dsi.o \
intel_dsi_cmd.o \
+ intel_dsi_pll.o \
intel_bios.o \
intel_ddi.o \
intel_dp.o \
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e2205cf..8b81516 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -390,6 +390,38 @@
#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
+/* vlv2 north clock has */
+#define CCK_REG_DSI_PLL_FUSE 0x44
+#define CCK_REG_DSI_PLL_CONTROL 0x48
+#define DSI_PLL_VCO_EN (1 << 31)
+#define DSI_PLL_LDO_GATE (1 << 30)
+#define DSI_PLL_P1_POST_DIV_SHIFT 17
+#define DSI_PLL_P1_POST_DIV_MASK (0x1ff << 17)
+#define DSI_PLL_P2_MUX_DSI0_DIV2 (1 << 13)
+#define DSI_PLL_P3_MUX_DSI1_DIV2 (1 << 12)
+#define DSI_PLL_MUX_MASK (3 << 9)
+#define DSI_PLL_MUX_DSI0_DSIPLL (0 << 10)
+#define DSI_PLL_MUX_DSI0_CCK (1 << 10)
+#define DSI_PLL_MUX_DSI1_DSIPLL (0 << 9)
+#define DSI_PLL_MUX_DSI1_CCK (1 << 9)
+#define DSI_PLL_CLK_GATE_MASK (0xf << 5)
+#define DSI_PLL_CLK_GATE_DSI0_DSIPLL (1 << 8)
+#define DSI_PLL_CLK_GATE_DSI1_DSIPLL (1 << 7)
+#define DSI_PLL_CLK_GATE_DSI0_CCK (1 << 6)
+#define DSI_PLL_CLK_GATE_DSI1_CCK (1 << 5)
+#define DSI_PLL_LOCK (1 << 0)
+#define CCK_REG_DSI_PLL_DIVIDER 0x4c
+#define DSI_PLL_LFSR (1 << 31)
+#define DSI_PLL_FRACTION_EN (1 << 30)
+#define DSI_PLL_FRAC_COUNTER_SHIFT 27
+#define DSI_PLL_FRAC_COUNTER_MASK (7 << 27)
+#define DSI_PLL_USYNC_CNT_SHIFT 18
+#define DSI_PLL_USYNC_CNT_MASK (0x1ff << 18)
+#define DSI_PLL_N1_DIV_SHIFT 16
+#define DSI_PLL_N1_DIV_MASK (3 << 16)
+#define DSI_PLL_M1_DIV_SHIFT 0
+#define DSI_PLL_M1_DIV_MASK (0x1ff << 0)
+
/*
* DPIO - a special bus for various display related registers to hide behind
*
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 0dfb28f..263c8d2 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -83,6 +83,8 @@ static bool intel_dsi_compute_config(struct intel_encoder *encoder,
static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
{
DRM_DEBUG_KMS("\n");
+
+ vlv_enable_dsi_pll(encoder);
}
static void intel_dsi_pre_enable(struct intel_encoder *encoder)
@@ -167,6 +169,8 @@ static void intel_dsi_disable(struct intel_encoder *encoder)
static void intel_dsi_post_disable(struct intel_encoder *encoder)
{
DRM_DEBUG_KMS("\n");
+
+ vlv_disable_dsi_pll(encoder);
}
static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -303,6 +307,9 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder)
DRM_DEBUG_KMS("pipe %d\n", pipe);
+ /* Update the DSI PLL */
+ vlv_enable_dsi_pll(intel_encoder);
+
/* escape clock divider, 20MHz, shared for A and C. device ready must be
* off when doing this! txclkesc? */
tmp = I915_READ(MIPI_CTRL(0));
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index f308269..c7765f3 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -96,4 +96,7 @@ static inline struct intel_dsi *enc_to_intel_dsi(struct drm_encoder *encoder)
return container_of(encoder, struct intel_dsi, base.base);
}
+extern void vlv_enable_dsi_pll(struct intel_encoder *encoder);
+extern void vlv_disable_dsi_pll(struct intel_encoder *encoder);
+
#endif /* _INTEL_DSI_H */
diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
new file mode 100644
index 0000000..582f626
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright © 2013 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Shobhit Kumar <shobhit.kumar at intel.com>
+ * Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu at intel.com>
+ */
+
+#include <linux/kernel.h>
+#include "intel_drv.h"
+#include "i915_drv.h"
+#include "intel_dsi.h"
+
+#define DSI_HSS_PACKET_SIZE 4
+#define DSI_HSE_PACKET_SIZE 4
+#define DSI_HSA_PACKET_EXTRA_SIZE 6
+#define DSI_HBP_PACKET_EXTRA_SIZE 6
+#define DSI_HACTIVE_PACKET_EXTRA_SIZE 6
+#define DSI_HFP_PACKET_EXTRA_SIZE 6
+#define DSI_EOTP_PACKET_SIZE 4
+
+struct dsi_mnp {
+ u32 dsi_pll_ctrl;
+ u32 dsi_pll_div;
+};
+
+static const u32 lfsr_converts[] = {
+ 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 62 - 70 */
+ 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */
+ 106, 53, 282, 397, 354, 227, 113, 56, 284, 142, /* 81 - 90 */
+ 71, 35 /* 91 - 92 */
+};
+
+static u32 dsi_rr_formula(struct drm_display_mode *mode,
+ int pixel_format, int video_mode_format,
+ int lane_count, bool eotp)
+{
+ u32 bpp;
+ u32 hactive, vactive, hfp, hsync, hbp, vfp, vsync, vbp;
+ u32 hsync_bytes, hbp_bytes, hactive_bytes, hfp_bytes;
+ u32 bytes_per_line, bytes_per_frame;
+ u32 num_frames;
+ u32 bytes_per_x_frames, bytes_per_x_frames_x_lanes;
+ u32 dsi_bit_clock_hz;
+ u32 dsi_clk;
+
+ switch (pixel_format) {
+ default:
+ case VID_MODE_FORMAT_RGB888:
+ case VID_MODE_FORMAT_RGB666_LOOSE:
+ bpp = 24;
+ break;
+ case VID_MODE_FORMAT_RGB666:
+ bpp = 18;
+ break;
+ case VID_MODE_FORMAT_RGB565:
+ bpp = 16;
+ break;
+ }
+
+ hactive = mode->hdisplay;
+ vactive = mode->vdisplay;
+ hfp = mode->hsync_start - mode->hdisplay;
+ hsync = mode->hsync_end - mode->hsync_start;
+ hbp = mode->htotal - mode->hsync_end;
+
+ vfp = mode->vsync_start - mode->vdisplay;
+ vsync = mode->vsync_end - mode->vsync_start;
+ vbp = mode->vtotal - mode->vsync_end;
+
+ hsync_bytes = DIV_ROUND_UP(hsync * bpp, 8);
+ hbp_bytes = DIV_ROUND_UP(hbp * bpp, 8);
+ hactive_bytes = DIV_ROUND_UP(hactive * bpp, 8);
+ hfp_bytes = DIV_ROUND_UP(hfp * bpp, 8);
+
+ bytes_per_line = DSI_HSS_PACKET_SIZE + hsync_bytes +
+ DSI_HSA_PACKET_EXTRA_SIZE + DSI_HSE_PACKET_SIZE +
+ hbp_bytes + DSI_HBP_PACKET_EXTRA_SIZE +
+ hactive_bytes + DSI_HACTIVE_PACKET_EXTRA_SIZE +
+ hfp_bytes + DSI_HFP_PACKET_EXTRA_SIZE;
+
+ /*
+ * XXX: Need to accurately calculate LP to HS transition timeout and add
+ * it to bytes_per_line/bytes_per_frame.
+ */
+
+ if (eotp && video_mode_format == VIDEO_MODE_BURST)
+ bytes_per_line += DSI_EOTP_PACKET_SIZE;
+
+ bytes_per_frame = vsync * bytes_per_line + vbp * bytes_per_line +
+ vactive * bytes_per_line + vfp * bytes_per_line;
+
+ if (eotp &&
+ (video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ||
+ video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS))
+ bytes_per_frame += DSI_EOTP_PACKET_SIZE;
+
+ num_frames = drm_mode_vrefresh(mode);
+ bytes_per_x_frames = num_frames * bytes_per_frame;
+
+ bytes_per_x_frames_x_lanes = bytes_per_x_frames / lane_count;
+
+ /* the dsi clock is divided by 2 in the hardware to get dsi ddr clock */
+ dsi_bit_clock_hz = bytes_per_x_frames_x_lanes * 8;
+ dsi_clk = dsi_bit_clock_hz / (1000 * 1000);
+
+ if (eotp && video_mode_format == VIDEO_MODE_BURST)
+ dsi_clk *= 2;
+
+ return dsi_clk;
+}
+
+#ifdef MNP_FROM_TABLE
+
+struct dsi_clock_table {
+ u32 freq;
+ u8 m;
+ u8 p;
+};
+
+static const struct dsi_clock_table dsi_clk_tbl[] = {
+ {300, 72, 6}, {313, 75, 6}, {323, 78, 6}, {333, 80, 6},
+ {343, 82, 6}, {353, 85, 6}, {363, 87, 6}, {373, 90, 6},
+ {383, 92, 6}, {390, 78, 5}, {393, 79, 5}, {400, 80, 5},
+ {401, 80, 5}, {402, 80, 5}, {403, 81, 5}, {404, 81, 5},
+ {405, 81, 5}, {406, 81, 5}, {407, 81, 5}, {408, 82, 5},
+ {409, 82, 5}, {410, 82, 5}, {411, 82, 5}, {412, 82, 5},
+ {413, 83, 5}, {414, 83, 5}, {415, 83, 5}, {416, 83, 5},
+ {417, 83, 5}, {418, 84, 5}, {419, 84, 5}, {420, 84, 5},
+ {430, 86, 5}, {440, 88, 5}, {450, 90, 5}, {460, 92, 5},
+ {470, 75, 4}, {480, 77, 4}, {490, 78, 4}, {500, 80, 4},
+ {510, 82, 4}, {520, 83, 4}, {530, 85, 4}, {540, 86, 4},
+ {550, 88, 4}, {560, 90, 4}, {570, 91, 4}, {580, 70, 3},
+ {590, 71, 3}, {600, 72, 3}, {610, 73, 3}, {620, 74, 3},
+ {630, 76, 3}, {640, 77, 3}, {650, 78, 3}, {660, 79, 3},
+ {670, 80, 3}, {680, 82, 3}, {690, 83, 3}, {700, 84, 3},
+ {710, 85, 3}, {720, 86, 3}, {730, 88, 3}, {740, 89, 3},
+ {750, 90, 3}, {760, 91, 3}, {770, 92, 3}, {780, 62, 2},
+ {790, 63, 2}, {800, 64, 2}, {880, 70, 2}, {900, 72, 2},
+ {1000, 80, 2}, /* dsi clock frequency in Mhz*/
+};
+
+static int dsi_calc_mnp(u32 dsi_clk, struct dsi_mnp *dsi_mnp)
+{
+ unsigned int i;
+ u8 m;
+ u8 n;
+ u8 p;
+ u32 m_seed;
+
+ if (dsi_clk < 300 || dsi_clk > 1000)
+ return -ECHRNG;
+
+ for (i = 0; i <= ARRAY_SIZE(dsi_clk_tbl); i++) {
+ if (dsi_clk_tbl[i].freq > dsi_clk)
+ break;
+ }
+
+ m = dsi_clk_tbl[i].m;
+ p = dsi_clk_tbl[i].p;
+ m_seed = lfsr_converts[m - 62];
+ n = 1;
+ dsi_mnp->dsi_pll_ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + p - 2);
+ dsi_mnp->dsi_pll_div = (n - 1) << DSI_PLL_N1_DIV_SHIFT |
+ m_seed << DSI_PLL_M1_DIV_SHIFT;
+
+ return 0;
+}
+
+#else
+
+static int dsi_calc_mnp(u32 dsi_clk, struct dsi_mnp *dsi_mnp)
+{
+ u32 m, n, p;
+ u32 ref_clk;
+ u32 error;
+ u32 tmp_error;
+ u32 target_dsi_clk;
+ u32 calc_dsi_clk;
+ u32 calc_m;
+ u32 calc_p;
+ u32 m_seed;
+
+ if (dsi_clk < 300 || dsi_clk > 1150) {
+ DRM_ERROR("DSI CLK Out of Range\n");
+ return -ECHRNG;
+ }
+
+ ref_clk = 25000;
+ target_dsi_clk = dsi_clk * 1000;
+ error = 0xFFFFFFFF;
+ calc_m = 0;
+ calc_p = 0;
+
+ for (m = 62; m <= 92; m++) {
+ for (p = 2; p <= 6; p++) {
+
+ calc_dsi_clk = (m * ref_clk) / p;
+ if (calc_dsi_clk >= target_dsi_clk) {
+ tmp_error = calc_dsi_clk - target_dsi_clk;
+ if (tmp_error < error) {
+ error = tmp_error;
+ calc_m = m;
+ calc_p = p;
+ }
+ }
+ }
+ }
+
+ m_seed = lfsr_converts[calc_m - 62];
+ n = 1;
+ dsi_mnp->dsi_pll_ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2);
+ dsi_mnp->dsi_pll_div = (n - 1) << DSI_PLL_N1_DIV_SHIFT |
+ m_seed << DSI_PLL_M1_DIV_SHIFT;
+
+ return 0;
+}
+
+#endif
+
+/*
+ * XXX: The muxing and gating is hard coded for now. Need to add support for
+ * sharing PLLs with two DSI outputs.
+ */
+static void vlv_configure_dsi_pll(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+ struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ int ret;
+ struct dsi_mnp dsi_mnp;
+ u32 dsi_clk;
+
+ dsi_clk = dsi_rr_formula(mode, intel_dsi->pixel_format,
+ intel_dsi->video_mode_format,
+ intel_dsi->lane_count, !intel_dsi->eot_disable);
+
+ ret = dsi_calc_mnp(dsi_clk, &dsi_mnp);
+ if (ret) {
+ DRM_DEBUG_KMS("dsi_calc_mnp failed\n");
+ return;
+ }
+
+ dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL;
+
+ DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n",
+ dsi_mnp.dsi_pll_div, dsi_mnp.dsi_pll_ctrl);
+
+ vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, 0);
+ vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_DIVIDER, dsi_mnp.dsi_pll_div);
+ vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, dsi_mnp.dsi_pll_ctrl);
+}
+
+void vlv_enable_dsi_pll(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ u32 tmp;
+
+ DRM_DEBUG_KMS("\n");
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ vlv_configure_dsi_pll(encoder);
+
+ /* wait at least 0.5 us after ungating before enabling VCO */
+ usleep_range(1, 10);
+
+ tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
+ tmp |= DSI_PLL_VCO_EN;
+ vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
+
+ mutex_unlock(&dev_priv->dpio_lock);
+
+ if (wait_for(I915_READ(PIPECONF(PIPE_A)) & PIPECONF_DSI_PLL_LOCKED, 20)) {
+ DRM_ERROR("DSI PLL lock failed\n");
+ return;
+ }
+
+ DRM_DEBUG_KMS("DSI PLL locked\n");
+}
+
+void vlv_disable_dsi_pll(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ u32 tmp;
+
+ DRM_DEBUG_KMS("\n");
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
+ tmp &= ~DSI_PLL_VCO_EN;
+ tmp |= DSI_PLL_LDO_GATE;
+ vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
--
1.7.10.4
More information about the Intel-gfx
mailing list