[Intel-gfx] [PATCH 86/90] assembler: Remove trailing white space
Damien Lespiau
damien.lespiau at intel.com
Mon Feb 4 16:28:21 CET 2013
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
assembler/brw_eu.c | 16 +++++++-------
assembler/brw_eu_debug.c | 20 +++++++++---------
assembler/brw_eu_emit.c | 48 +++++++++++++++++++++++-----------------------
assembler/brw_eu_util.c | 18 ++++++++--------
assembler/disasm-main.c | 2 +-
assembler/gen4asm.h | 4 +-
assembler/main.c | 2 +-
7 files changed, 55 insertions(+), 55 deletions(-)
diff --git a/assembler/brw_eu.c b/assembler/brw_eu.c
index 69f088d..a9afc82 100644
--- a/assembler/brw_eu.c
+++ b/assembler/brw_eu.c
@@ -2,7 +2,7 @@
Copyright (C) Intel Corp. 2006. All Rights Reserved.
Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
develop this 3D driver.
-
+
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
@@ -10,11 +10,11 @@
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
-
+
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial
portions of the Software.
-
+
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
@@ -22,13 +22,13 @@
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
+
**********************************************************************/
/*
* Authors:
* Keith Whitwell <keith at tungstengraphics.com>
*/
-
+
#include <string.h>
@@ -78,7 +78,7 @@ void brw_set_predicate_control_flag_value( struct brw_compile *p, GLuint value )
}
p->current->header.predicate_control = BRW_PREDICATE_NORMAL;
- }
+ }
}
void brw_set_predicate_control( struct brw_compile *p, GLuint pc )
@@ -165,7 +165,7 @@ void brw_push_insn_state( struct brw_compile *p )
assert(p->current != &p->stack[BRW_EU_MAX_INSN_STACK-1]);
memcpy(p->current+1, p->current, sizeof(struct brw_instruction));
p->compressed_stack[p->current - p->stack] = p->compressed;
- p->current++;
+ p->current++;
}
void brw_pop_insn_state( struct brw_compile *p )
@@ -203,7 +203,7 @@ brw_init_compile(struct brw_context *brw, struct brw_compile *p, void *mem_ctx)
brw_set_mask_control(p, BRW_MASK_ENABLE); /* what does this do? */
brw_set_saturate(p, 0);
brw_set_compression_control(p, BRW_COMPRESSION_NONE);
- brw_set_predicate_control_flag_value(p, 0xff);
+ brw_set_predicate_control_flag_value(p, 0xff);
/* Set up control flow stack */
p->if_stack_depth = 0;
diff --git a/assembler/brw_eu_debug.c b/assembler/brw_eu_debug.c
index 1e4f933..b446007 100644
--- a/assembler/brw_eu_debug.c
+++ b/assembler/brw_eu_debug.c
@@ -2,7 +2,7 @@
Copyright (C) Intel Corp. 2006. All Rights Reserved.
Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
develop this 3D driver.
-
+
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
@@ -10,11 +10,11 @@
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
-
+
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial
portions of the Software.
-
+
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
@@ -22,13 +22,13 @@
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
+
**********************************************************************/
/*
* Authors:
* Keith Whitwell <keith at tungstengraphics.com>
*/
-
+
#include "brw_eu.h"
void brw_print_reg( struct brw_reg hwreg )
@@ -51,10 +51,10 @@ void brw_print_reg( struct brw_reg hwreg )
"f"
};
- printf("%s%s",
+ printf("%s%s",
hwreg.abs ? "abs/" : "",
hwreg.negate ? "-" : "");
-
+
if (hwreg.file == BRW_GENERAL_REGISTER_FILE &&
hwreg.nr % 2 == 0 &&
hwreg.subnr == 0 &&
@@ -69,7 +69,7 @@ void brw_print_reg( struct brw_reg hwreg )
hwreg.vstride == BRW_VERTICAL_STRIDE_0 &&
hwreg.width == BRW_WIDTH_1 &&
hwreg.hstride == BRW_HORIZONTAL_STRIDE_0 &&
- hwreg.type == BRW_REGISTER_TYPE_F) {
+ hwreg.type == BRW_REGISTER_TYPE_F) {
/* "scalar" register */
printf("scl%d.%d", hwreg.nr, hwreg.subnr / 4);
}
@@ -77,13 +77,13 @@ void brw_print_reg( struct brw_reg hwreg )
printf("imm %f", hwreg.dw1.f);
}
else {
- printf("%s%d.%d<%d;%d,%d>:%s",
+ printf("%s%d.%d<%d;%d,%d>:%s",
file[hwreg.file],
hwreg.nr,
hwreg.subnr / type_sz(hwreg.type),
hwreg.vstride ? (1<<(hwreg.vstride-1)) : 0,
1<<hwreg.width,
- hwreg.hstride ? (1<<(hwreg.hstride-1)) : 0,
+ hwreg.hstride ? (1<<(hwreg.hstride-1)) : 0,
type[hwreg.type]);
}
}
diff --git a/assembler/brw_eu_emit.c b/assembler/brw_eu_emit.c
index ae570c7..a1e96d1 100644
--- a/assembler/brw_eu_emit.c
+++ b/assembler/brw_eu_emit.c
@@ -2,7 +2,7 @@
Copyright (C) Intel Corp. 2006. All Rights Reserved.
Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
develop this 3D driver.
-
+
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
@@ -10,11 +10,11 @@
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
-
+
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial
portions of the Software.
-
+
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
@@ -22,13 +22,13 @@
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
+
**********************************************************************/
/*
* Authors:
* Keith Whitwell <keith at tungstengraphics.com>
*/
-
+
#include <string.h>
#include "brw_context.h"
@@ -115,7 +115,7 @@ brw_set_dest(struct brw_compile *p, struct brw_instruction *insn,
insn->bits1.da1.dest_reg_type = dest.type;
insn->bits1.da1.dest_address_mode = dest.address_mode;
- if (dest.address_mode == BRW_ADDRESS_DIRECT) {
+ if (dest.address_mode == BRW_ADDRESS_DIRECT) {
insn->bits1.da1.dest_reg_nr = dest.nr;
if (insn->header.access_mode == BRW_ALIGN_1) {
@@ -276,7 +276,7 @@ brw_set_src0(struct brw_compile *p, struct brw_instruction *insn,
if (reg.file == BRW_IMMEDIATE_VALUE) {
insn->bits3.ud = reg.dw1.ud;
-
+
/* Required to set some fields in src1 as well:
*/
@@ -288,7 +288,7 @@ brw_set_src0(struct brw_compile *p, struct brw_instruction *insn,
insn->bits1.da1.src1_reg_type = reg.type;
*/
}
- else
+ else
{
if (reg.address_mode == BRW_ADDRESS_DIRECT) {
if (insn->header.access_mode == BRW_ALIGN_1) {
@@ -304,7 +304,7 @@ brw_set_src0(struct brw_compile *p, struct brw_instruction *insn,
insn->bits2.ia1.src0_subreg_nr = reg.subnr;
if (insn->header.access_mode == BRW_ALIGN_1) {
- insn->bits2.ia1.src0_indirect_offset = reg.dw1.bits.indirect_offset;
+ insn->bits2.ia1.src0_indirect_offset = reg.dw1.bits.indirect_offset;
}
else {
insn->bits2.ia16.src0_subreg_nr = reg.dw1.bits.indirect_offset;
@@ -316,7 +316,7 @@ brw_set_src0(struct brw_compile *p, struct brw_instruction *insn,
/* FIXME: While this is correct, if the assembler uses that code path
* the opcode generated are different and thus needs a validation
* pass.
- if (reg.width == BRW_WIDTH_1 &&
+ if (reg.width == BRW_WIDTH_1 &&
insn->header.execution_size == BRW_EXECUTE_1) {
insn->bits2.da1.src0_horiz_stride = BRW_HORIZONTAL_STRIDE_0;
insn->bits2.da1.src0_width = BRW_WIDTH_1;
@@ -404,7 +404,7 @@ void brw_set_src1(struct brw_compile *p,
/* FIXME: While this is correct, if the assembler uses that code path
* the opcode generated are different and thus needs a validation
* pass.
- if (reg.width == BRW_WIDTH_1 &&
+ if (reg.width == BRW_WIDTH_1 &&
insn->header.execution_size == BRW_EXECUTE_1) {
insn->bits3.da1.src1_horiz_stride = BRW_HORIZONTAL_STRIDE_0;
insn->bits3.da1.src1_width = BRW_WIDTH_1;
@@ -766,7 +766,7 @@ brw_next_insn(struct brw_compile *p, GLuint opcode)
insn = &p->store[p->nr_insn++];
memcpy(insn, p->current, sizeof(*insn));
- /* Reset this one-shot flag:
+ /* Reset this one-shot flag:
*/
if (p->current->header.destreg__conditionalmod) {
@@ -795,7 +795,7 @@ static struct brw_instruction *brw_alu2(struct brw_compile *p,
struct brw_reg src0,
struct brw_reg src1 )
{
- struct brw_instruction *insn = next_insn(p, opcode);
+ struct brw_instruction *insn = next_insn(p, opcode);
brw_set_dest(p, insn, dest);
brw_set_src0(p, insn, src0);
brw_set_src1(p, insn, src1);
@@ -1084,7 +1084,7 @@ struct brw_instruction *brw_MUL(struct brw_compile *p,
void brw_NOP(struct brw_compile *p)
{
- struct brw_instruction *insn = next_insn(p, BRW_OPCODE_NOP);
+ struct brw_instruction *insn = next_insn(p, BRW_OPCODE_NOP);
brw_set_dest(p, insn, retype(brw_vec4_grf(0,0), BRW_REGISTER_TYPE_UD));
brw_set_src0(p, insn, retype(brw_vec4_grf(0,0), BRW_REGISTER_TYPE_UD));
brw_set_src1(p, insn, brw_imm_ud(0x0));
@@ -1098,7 +1098,7 @@ void brw_NOP(struct brw_compile *p)
* Comparisons, if/else/endif
*/
-struct brw_instruction *brw_JMPI(struct brw_compile *p,
+struct brw_instruction *brw_JMPI(struct brw_compile *p,
struct brw_reg dest,
struct brw_reg src0,
struct brw_reg src1)
@@ -1736,7 +1736,7 @@ void brw_CMP(struct brw_compile *p,
/* Make it so that future instructions will use the computed flag
* value until brw_set_predicate_control_flag_value() is called
- * again.
+ * again.
*/
if (dest.file == BRW_ARCHITECTURE_REGISTER_FILE &&
dest.nr == 0) {
@@ -2211,7 +2211,7 @@ void brw_SAMPLE(struct brw_compile *p,
/*printf("%s: zero writemask??\n", __FUNCTION__); */
return;
}
-
+
/* Hardware doesn't do destination dependency checking on send
* instructions properly. Add a workaround which generates the
* dependency by other means. In practice it seems like this bug
@@ -2260,11 +2260,11 @@ void brw_SAMPLE(struct brw_compile *p,
brw_MOV(p, retype(m1, BRW_REGISTER_TYPE_UD),
retype(brw_vec8_grf(0,0), BRW_REGISTER_TYPE_UD));
- brw_MOV(p, get_element_ud(m1, 2), brw_imm_ud(newmask << 12));
+ brw_MOV(p, get_element_ud(m1, 2), brw_imm_ud(newmask << 12));
brw_pop_insn_state(p);
- src0 = retype(brw_null_reg(), BRW_REGISTER_TYPE_UW);
+ src0 = retype(brw_null_reg(), BRW_REGISTER_TYPE_UW);
dest = offset(dest, dst_offset);
/* For 16-wide dispatch, masked channels are skipped in the
@@ -2278,7 +2278,7 @@ void brw_SAMPLE(struct brw_compile *p,
{
struct brw_instruction *insn;
-
+
gen6_resolve_implied_move(p, &src0, msg_reg_nr);
insn = next_insn(p, BRW_OPCODE_SEND);
@@ -2293,7 +2293,7 @@ void brw_SAMPLE(struct brw_compile *p,
binding_table_index,
sampler,
msg_type,
- response_length,
+ response_length,
msg_length,
header_present,
simd_mode,
@@ -2363,9 +2363,9 @@ void brw_urb_WRITE(struct brw_compile *p,
allocate,
used,
msg_length,
- response_length,
- eot,
- writes_complete,
+ response_length,
+ eot,
+ writes_complete,
offset,
swizzle);
}
diff --git a/assembler/brw_eu_util.c b/assembler/brw_eu_util.c
index 2037634..e3bfbc7 100644
--- a/assembler/brw_eu_util.c
+++ b/assembler/brw_eu_util.c
@@ -2,7 +2,7 @@
Copyright (C) Intel Corp. 2006. All Rights Reserved.
Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
develop this 3D driver.
-
+
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
@@ -10,11 +10,11 @@
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
-
+
The above copyright notice and this permission notice (including the
next paragraph) shall be included in all copies or substantial
portions of the Software.
-
+
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
@@ -22,29 +22,29 @@
LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
+
**********************************************************************/
/*
* Authors:
* Keith Whitwell <keith at tungstengraphics.com>
*/
-
+
#include "brw_context.h"
#include "brw_defines.h"
#include "brw_eu.h"
-void brw_math_invert( struct brw_compile *p,
+void brw_math_invert( struct brw_compile *p,
struct brw_reg dst,
struct brw_reg src)
{
- brw_math( p,
+ brw_math( p,
dst,
- BRW_MATH_FUNCTION_INV,
+ BRW_MATH_FUNCTION_INV,
0,
src,
- BRW_MATH_PRECISION_FULL,
+ BRW_MATH_PRECISION_FULL,
BRW_MATH_DATA_VECTOR );
}
diff --git a/assembler/disasm-main.c b/assembler/disasm-main.c
index 87e6737..5bc75af 100644
--- a/assembler/disasm-main.c
+++ b/assembler/disasm-main.c
@@ -165,7 +165,7 @@ int main(int argc, char **argv)
exit(1);
}
}
-
+
for (inst = program->first; inst; inst = inst->next)
brw_disasm (output, &inst->insn.gen, gen);
exit (0);
diff --git a/assembler/gen4asm.h b/assembler/gen4asm.h
index 49baf9d..a708c52 100644
--- a/assembler/gen4asm.h
+++ b/assembler/gen4asm.h
@@ -106,7 +106,7 @@ struct options {
struct region {
int vert_stride, width, horiz_stride;
- int is_default;
+ int is_default;
};
struct regtype {
int type;
@@ -114,7 +114,7 @@ struct regtype {
};
/**
- * This structure is the internal representation of source operands in the
+ * This structure is the internal representation of source operands in the
* parser.
*/
struct src_operand {
diff --git a/assembler/main.c b/assembler/main.c
index f1d78d0..05ca337 100644
--- a/assembler/main.c
+++ b/assembler/main.c
@@ -457,7 +457,7 @@ int main(int argc, char **argv)
// this is a branch instruction with one offset argument
int offset = reloc->first_reloc_offset;
/* bspec: Unlike other flow control instructions, the offset used by JMPI is relative to the incremented instruction pointer rather than the IP value for the instruction itself. */
-
+
int is_jmpi = inst->header.opcode == BRW_OPCODE_JMPI; // target relative to the post-incremented IP, so delta == 1 if JMPI
if(is_jmpi)
offset --;
--
1.7.7.5
More information about the Intel-gfx
mailing list