[Intel-gfx] [PATCH 09/24] drm/i915: extract ibx_display_interrupt_update

[Daniel Vetter]

This way all changes to SDEIMR all go through the same function, with
the exception of the (single-threaded) setup/teardown code.

For paranoia again add an assert_spin_locked.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_irq.c | 42 +++++++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 95e15cd..c2b4b09 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -177,6 +177,20 @@ static void ivybridge_set_fifo_underrun_reporting(struct drm_device *dev,
 	}
 }
 
+static void ibx_display_interrupt_update(struct drm_i915_private *dev_priv,
+					 uint32_t interrupt_mask,
+					 uint32_t enabled_irq_mask)
+{
+	uint32_t sdeimr = I915_READ(SDEIMR);
+	sdeimr &= ~interrupt_mask;
+	sdeimr |= ~enabled_irq_mask;
+
+	assert_spin_locked(&dev_priv->irq_lock);
+
+	I915_WRITE(SDEIMR, sdeimr);
+	POSTING_READ(SDEIMR);
+}
+
 static void ibx_set_fifo_underrun_reporting(struct intel_crtc *crtc,
 					    bool enable)
 {
@@ -185,12 +199,8 @@ static void ibx_set_fifo_underrun_reporting(struct intel_crtc *crtc,
 	uint32_t bit = (crtc->pipe == PIPE_A) ? SDE_TRANSA_FIFO_UNDER :
 						SDE_TRANSB_FIFO_UNDER;
 
-	if (enable)
-		I915_WRITE(SDEIMR, I915_READ(SDEIMR) & ~bit);
-	else
-		I915_WRITE(SDEIMR, I915_READ(SDEIMR) | bit);
-
-	POSTING_READ(SDEIMR);
+	ibx_display_interrupt_update(dev_priv, bit,
+				     enable ? bit : 0);
 }
 
 static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
@@ -206,13 +216,10 @@ static void cpt_set_fifo_underrun_reporting(struct drm_device *dev,
 		I915_WRITE(SERR_INT, SERR_INT_TRANS_A_FIFO_UNDERRUN |
 				     SERR_INT_TRANS_B_FIFO_UNDERRUN |
 				     SERR_INT_TRANS_C_FIFO_UNDERRUN);
-
-		I915_WRITE(SDEIMR, I915_READ(SDEIMR) & ~SDE_ERROR_CPT);
-	} else {
-		I915_WRITE(SDEIMR, I915_READ(SDEIMR) | SDE_ERROR_CPT);
 	}
 
-	POSTING_READ(SDEIMR);
+	ibx_display_interrupt_update(dev_priv, SDE_ERROR_CPT,
+				     enable ? SDE_ERROR_CPT : 0);
 }
 
 /**
@@ -2585,22 +2592,21 @@ static void ibx_hpd_irq_setup(struct drm_device *dev)
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct intel_encoder *intel_encoder;
-	u32 mask = ~I915_READ(SDEIMR);
-	u32 hotplug;
+	u32 hotplug_irqs, hotplug, enabled_irqs = 0;
 
 	if (HAS_PCH_IBX(dev)) {
-		mask &= ~SDE_HOTPLUG_MASK;
+		hotplug_irqs = SDE_HOTPLUG_MASK;
 		list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
 			if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
-				mask |= hpd_ibx[intel_encoder->hpd_pin];
+				enabled_irqs |= hpd_ibx[intel_encoder->hpd_pin];
 	} else {
-		mask &= ~SDE_HOTPLUG_MASK_CPT;
+		hotplug_irqs = SDE_HOTPLUG_MASK_CPT;
 		list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head)
 			if (dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark == HPD_ENABLED)
-				mask |= hpd_cpt[intel_encoder->hpd_pin];
+				enabled_irqs |= hpd_cpt[intel_encoder->hpd_pin];
 	}
 
-	I915_WRITE(SDEIMR, ~mask);
+	ibx_display_interrupt_update(dev_priv, hotplug_irqs, enabled_irqs);
 
 	/*
 	 * Enable digital hotplug on the PCH, and configure the DP short pulse
-- 
1.8.1.4