[Intel-gfx] [PATCH] drm/i915: replace snb_update_wm with haswell_update_wm on HSW
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue May 21 15:08:06 CEST 2013
On Thu, May 09, 2013 at 05:13:41PM -0300, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> We were previously calling sandybridge_update_wm on HSW, but the SNB
> function didn't really match the HSW specification, so we were just
> writing the wrong values. For example, I was not seeing any LP
> watermark ever enabled.
>
> This patch implements the haswell_update_wm function as described in
> our specification. The values match the "Haswell Watermark Calculator"
> too.
>
> With this patch I can finally see us reaching PC7 state with screen
> sizes <= 1920x1080.
>
> The only thing I see we're missing is to properly account for the case
> where the primary plane is disabled. We still don't do this and I
> believe we'll need some small reworks on intel_sprite.c if we want to
> do this correctly, so let's leave this feature for a future patch.
>
> v2: - Refactor code in the hope that it will be more useful for
> Ville's rework
> - Immpletement the 2 pieces missing on v1: sprite watermarks and
> support for 5/6 data buffer partitioning.
Apart from I said yesterday, this is a rather large patch and could be
split up a bit to make it easier to digest.
- IMHO the 1/2 vs. 5/6 split stuff could be dropped completely for now
since it doesn't even appear functional
- the pfit downscaling pixel rate adjustment part at least could be a
separate patch
A few more bikesheds below.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 7 +
> drivers/gpu/drm/i915/intel_drv.h | 12 +
> drivers/gpu/drm/i915/intel_pm.c | 522 +++++++++++++++++++++++++++++++++--
> drivers/gpu/drm/i915/intel_sprite.c | 6 +-
> 4 files changed, 527 insertions(+), 20 deletions(-)
>
> Hi
>
> I had some discussions with Ville based on his plans to rework the watermarks
> code, so I decided to do a little refactoring on the previous patch in order to
> make it easier for him. Now we have a clear split between the 3 steps: (i)
> gather the WM parameters, (ii) calculate the WM values and (iii) write the
> values to the registers. My idea is that he'll be able to take parts of my
> Haswell-specific code and make them become usable by the other hardware
> generations. He'll probably have to rename some of the hsw_ structs and move
> them around, but I hope my code can be used as a starting point for his rework.
>
> In addition to the refactoring I also added support for sprite watermarks and
> the 5/6 data buffer partitioning mode, so we should be "feature complete".
>
> I checked the values set by the Kernel and they do match the watermarks
> calculator.
>
> Thanks,
> Paulo
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 92dcbe3..33b5de3 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3055,6 +3055,10 @@
> #define WM3S_LP_IVB 0x45128
> #define WM1S_LP_EN (1<<31)
>
> +#define HSW_WM_LP_VAL(lat, fbc, pri, cur) \
> + (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \
> + ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur))
> +
> /* Memory latency timer register */
> #define MLTR_ILK 0x11222
> #define MLTR_WM1_SHIFT 0
> @@ -4938,6 +4942,9 @@
> #define SFUSE_STRAP_DDIC_DETECTED (1<<1)
> #define SFUSE_STRAP_DDID_DETECTED (1<<0)
>
> +#define WM_MISC 0x45260
> +#define WM_MISC_DATA_PARTITION_5_6 (1 << 0)
> +
> #define WM_DBG 0x45280
> #define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0)
> #define WM_DBG_DISALLOW_MAXFIFO (1<<1)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 80b417a..b8376e1 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -319,6 +319,18 @@ struct intel_plane {
> unsigned int crtc_w, crtc_h;
> uint32_t src_x, src_y;
> uint32_t src_w, src_h;
> +
> + /* Since we need to change the watermarks before/after
> + * enabling/disabling the planes, we need to store the parameters here
> + * as the other pieces of the struct may not reflect the values we want
> + * for the watermark calculations. Currently only Haswell uses this.
> + */
> + struct plane_watermark_parameters {
The type isn't used anywhere, so no need to give it a type name.
> + bool enable;
> + int horiz_pixels;
> + int bytes_per_pixel;
> + } wm;
> +
> void (*update_plane)(struct drm_plane *plane,
> struct drm_framebuffer *fb,
> struct drm_i915_gem_object *obj,
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 478518d..afc4705 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2068,20 +2068,236 @@ static void ivybridge_update_wm(struct drm_device *dev)
> cursor_wm);
> }
>
> -static void
> -haswell_update_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
> +static int hsw_wm_get_pixel_rate(struct drm_device *dev,
> + struct drm_crtc *crtc)
> +{
> + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + int pixel_rate, pfit_size;
> +
> + if (intel_crtc->config.pixel_target_clock)
> + pixel_rate = intel_crtc->config.pixel_target_clock;
> + else
> + pixel_rate = intel_crtc->config.adjusted_mode.clock;
> +
> + /* We only use IF-ID interlacing. If we ever use PF-ID we'll need to
> + * adjust the pixel_rate here. */
> +
> + pfit_size = intel_crtc->config.pch_pfit.size;
> + if (pfit_size) {
> + int x, y, crtc_x, crtc_y, hscale, vscale, totscale;
> +
> + x = (pfit_size >> 16) & 0xFFFF;
> + y = pfit_size & 0xFFFF;
> + crtc_x = intel_crtc->config.adjusted_mode.hdisplay;
> + crtc_y = intel_crtc->config.adjusted_mode.vdisplay;
> +
> + hscale = crtc_x * 1000 / x;
> + vscale = crtc_y * 1000 / y;
> + hscale = (hscale < 1000) ? 1000 : hscale;
> + vscale = (vscale < 1000) ? 1000 : vscale;
> + totscale = hscale * vscale / 1000;
> + pixel_rate = pixel_rate * totscale / 1000;
> + }
> +
> + return pixel_rate;
> +}
> +
> +static int hsw_wm_method1(int pixel_rate, int bytes_per_pixel, int latency)
> +{
> + int ret;
> +
> + ret = pixel_rate * bytes_per_pixel * latency;
> + ret = DIV_ROUND_UP(ret, 64 * 10000) + 2;
> + return ret;
> +}
> +
> +static int hsw_wm_method2(int pixel_rate, int pipe_htotal, int horiz_pixels,
> + int bytes_per_pixel, int latency)
> +{
> + int ret;
> +
> + ret = DIV_ROUND_UP(pipe_htotal * 1000, pixel_rate);
> + ret = ((latency / (ret * 10)) + 1) * horiz_pixels * bytes_per_pixel;
> + ret = DIV_ROUND_UP(ret, 64) + 2;
> + return ret;
> +}
> +
> +static int hsw_wm_fbc(int pri_val, int horiz_pixels, int bytes_per_pixel)
> +{
> + return DIV_ROUND_UP(pri_val * 64, horiz_pixels * bytes_per_pixel) + 2;
> +}
> +
> +struct hsw_pipe_wm_parameters {
> + bool active;
> + bool sprite_enabled;
> + int pipe_htotal;
> + int pixel_rate;
> + int pri_bytes_per_pixel;
> + int spr_bytes_per_pixel;
> + int cur_bytes_per_pixel;
> + int pri_horiz_pixels;
> + int spr_horiz_pixels;
> + int cur_horiz_pixels;
> +};
> +
> +struct hsw_wm_maximums {
> + int pri;
> + int spr;
> + int cur;
> + int fbc;
> +};
> +
> +struct hsw_lp_wm_result {
> + bool enable;
> + bool fbc_enable;
This guy seems a bit pointless. You could just delay the fbc wm max
check until the time when you derive the final enable_fbc_wm value.
> + int pri_val;
> + int spr_val;
> + int cur_val;
> + int fbc_val;
> +};
> +
> +struct hsw_wm_values {
> + uint32_t wm_pipe[3];
> + uint32_t wm_lp[3];
> + uint32_t wm_lp_spr[3];
> + uint32_t wm_linetime[3];
> + bool enable_fbc_wm;
> +};
> +
> +static void hsw_compute_lp_wm(int mem_value, struct hsw_wm_maximums *max,
> + struct hsw_pipe_wm_parameters *params,
> + struct hsw_lp_wm_result *result)
> +{
> + enum pipe pipe;
> + int pri_val[3], spr_val[3], cur_val[3], fbc_val[3];
> + int method1, method2;
> +
> + for (pipe = PIPE_A; pipe <= PIPE_C; pipe++) {
> + struct hsw_pipe_wm_parameters *p = ¶ms[pipe];
> +
> + if (p->active) {
> + /* TODO: for now, assume the primary plane is always
> + * enabled. */
> + method1 = hsw_wm_method1(p->pixel_rate,
> + p->pri_bytes_per_pixel,
> + mem_value);
> + method2 = hsw_wm_method2(p->pixel_rate,
> + p->pipe_htotal,
> + p->pri_horiz_pixels,
> + p->pri_bytes_per_pixel,
> + mem_value);
> + pri_val[pipe] = min(method1, method2);
I think these things could be refactored a bit into
hsw_wm_compute_primary(), hsw_wm_compute_sprite() etc. like I had in
my big rewrite patch.
> +
> + if (p->sprite_enabled) {
> + method1 = hsw_wm_method1(p->pixel_rate,
> + p->spr_bytes_per_pixel,
> + mem_value);
> + method2 = hsw_wm_method2(p->pixel_rate,
> + p->pipe_htotal,
> + p->spr_horiz_pixels,
> + p->spr_bytes_per_pixel,
> + mem_value);
> + spr_val[pipe] = min(method1, method2);
> + } else {
> + spr_val[pipe] = 0;
> + }
> +
> + cur_val[pipe] = hsw_wm_method2(p->pixel_rate,
> + p->pipe_htotal,
> + p->cur_horiz_pixels,
> + p->cur_bytes_per_pixel,
> + mem_value);
> + fbc_val[pipe] = hsw_wm_fbc(pri_val[pipe],
> + p->pri_horiz_pixels,
> + p->pri_bytes_per_pixel);
> + } else {
> + pri_val[pipe] = 0;
> + spr_val[pipe] = 0;
> + cur_val[pipe] = 0;
> + fbc_val[pipe] = 0;
> + }
> + }
> +
> + result->pri_val = max3(pri_val[0], pri_val[1], pri_val[2]);
> + result->spr_val = max3(spr_val[0], spr_val[1], spr_val[2]);
> + result->cur_val = max3(cur_val[0], cur_val[1], cur_val[2]);
> + result->fbc_val = max3(fbc_val[0], fbc_val[1], fbc_val[2]);
> +
> + if (result->fbc_val > max->fbc) {
> + result->fbc_enable = false;
> + result->fbc_val = 0;
> + } else {
> + result->fbc_enable = true;
> + }
> +
> + result->enable = result->pri_val <= max->pri &&
> + result->spr_val <= max->spr &&
> + result->cur_val <= max->cur;
> +}
> +
> +static uint32_t hsw_compute_wm_pipe(struct drm_i915_private *dev_priv,
> + int mem_value, enum pipe pipe,
> + struct hsw_pipe_wm_parameters *params)
> +{
> + int pri_val, cur_val, spr_val, method1, method2;
> +
> + if (params->active) {
> + /* TODO: for now, assume the primary plane is always enabled. */
> + pri_val = hsw_wm_method1(params->pixel_rate,
> + params->pri_bytes_per_pixel,
> + mem_value);
> +
> + if (params->sprite_enabled) {
> + method1 = hsw_wm_method1(params->pixel_rate,
> + params->spr_bytes_per_pixel,
> + mem_value);
> + method2 = hsw_wm_method2(params->pixel_rate,
> + params->pipe_htotal,
> + params->spr_horiz_pixels,
> + params->spr_bytes_per_pixel,
> + mem_value);
> + spr_val = min(method1, method2);
> + } else {
> + spr_val = 0;
> + }
> +
> + cur_val = hsw_wm_method2(params->pixel_rate,
> + params->pipe_htotal,
> + params->cur_horiz_pixels,
> + params->cur_bytes_per_pixel,
> + mem_value);
> + } else {
> + pri_val = 0;
> + spr_val = 0;
> + cur_val = 0;
> + }
> +
> + WARN(pri_val > 127,
> + "Primary WM error, mode not supported for pipe %c\n",
> + pipe_name(pipe));
> + WARN(spr_val > 127,
> + "Sprite WM error, mode not supported for pipe %c\n",
> + pipe_name(pipe));
> + WARN(cur_val > 63,
> + "Cursor WM error, mode not supported for pipe %c\n",
> + pipe_name(pipe));
> +
> + return (pri_val << WM0_PIPE_PLANE_SHIFT) |
> + (spr_val << WM0_PIPE_SPRITE_SHIFT) |
> + cur_val;
> +}
> +
> +static uint32_t
> +hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - enum pipe pipe = intel_crtc->pipe;
> struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode;
> int target_clock;
> u32 linetime, ips_linetime;
>
> - if (!intel_crtc_active(crtc)) {
> - I915_WRITE(PIPE_WM_LINETIME(pipe), 0);
> - return;
> - }
> + if (!intel_crtc_active(crtc))
> + return 0;
>
> if (intel_crtc->config.pixel_target_clock)
> target_clock = intel_crtc->config.pixel_target_clock;
> @@ -2095,29 +2311,296 @@ haswell_update_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
> ips_linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8,
> intel_ddi_get_cdclk_freq(dev_priv));
>
> - I915_WRITE(PIPE_WM_LINETIME(pipe),
> - PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
> - PIPE_WM_LINETIME_TIME(linetime));
> + return PIPE_WM_LINETIME_IPS_LINETIME(ips_linetime) |
> + PIPE_WM_LINETIME_TIME(linetime);
> }
>
> -static void haswell_update_wm(struct drm_device *dev)
> +static void hsw_compute_wm_parameters(struct drm_device *dev,
> + struct hsw_pipe_wm_parameters *params,
> + uint32_t *wm,
> + struct hsw_wm_maximums *lp_max_1_2,
> + struct hsw_wm_maximums *lp_max_5_6)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct drm_crtc *crtc;
> + struct drm_plane *plane;
> + uint64_t sskpd = I915_READ64(MCH_SSKPD);
> enum pipe pipe;
> + int pipes_active = 0, sprites_enabled = 0;
>
> - /* Disable the LP WMs before changine the linetime registers. This is
> - * just a temporary code that will be replaced soon. */
> - I915_WRITE(WM3_LP_ILK, 0);
> - I915_WRITE(WM2_LP_ILK, 0);
> - I915_WRITE(WM1_LP_ILK, 0);
> + if ((sskpd >> 56) & 0xFF)
> + wm[0] = (sskpd >> 56) & 0xFF;
> + else
> + wm[0] = sskpd & 0xF;
> + wm[1] = ((sskpd >> 4) & 0xFF) * 5;
> + wm[2] = ((sskpd >> 12) & 0xFF) * 5;
> + wm[3] = ((sskpd >> 20) & 0x1FF) * 5;
> + wm[4] = ((sskpd >> 32) & 0x1FF) * 5;
> +
> + for_each_pipe(pipe) {
list_for_each_entry() would be more consistent with most of our code.
> + struct intel_crtc *intel_crtc;
> +
> + crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> + intel_crtc = to_intel_crtc(crtc);
> +
> + params[pipe].active = intel_crtc_active(crtc);
> + if (!params[pipe].active)
> + continue;
> +
> + pipes_active++;
> +
> + params[pipe].pipe_htotal =
> + intel_crtc->config.adjusted_mode.htotal;
> + params[pipe].pixel_rate = hsw_wm_get_pixel_rate(dev, crtc);
> + params[pipe].pri_bytes_per_pixel = crtc->fb->bits_per_pixel / 8;
> + params[pipe].cur_bytes_per_pixel = 4;
> + params[pipe].pri_horiz_pixels =
> + intel_crtc->config.adjusted_mode.hdisplay;
> + params[pipe].cur_horiz_pixels = 64;
Could avoid repeating the same params[pipe] stuff with eg.
struct hsw_pipe_wm_parameters *p = ¶ms[pipe];
p->foo = bar;
...
> + }
> +
> + list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
> + struct intel_plane *intel_plane = to_intel_plane(plane);
> +
> + pipe = intel_plane->pipe;
> + params[pipe].sprite_enabled = intel_plane->wm.enable;
> + params[pipe].spr_bytes_per_pixel =
> + intel_plane->wm.bytes_per_pixel;
> + params[pipe].spr_horiz_pixels = intel_plane->wm.horiz_pixels;
> +
> + if (params[pipe].sprite_enabled)
> + sprites_enabled++;
> + }
> +
> + if (pipes_active > 1) {
> + lp_max_1_2->pri = lp_max_5_6->pri = sprites_enabled ? 128 : 256;
> + lp_max_1_2->spr = lp_max_5_6->spr = 128;
> + lp_max_1_2->cur = lp_max_5_6->cur = 64;
> + } else {
> + lp_max_1_2->pri = sprites_enabled ? 384 : 768;
> + lp_max_5_6->pri = sprites_enabled ? 128 : 768;
> + lp_max_1_2->spr = 384;
> + lp_max_5_6->spr = 640;
> + lp_max_1_2->cur = lp_max_5_6->cur = 255;
> + }
> + lp_max_1_2->fbc = lp_max_5_6->fbc = 15;
> +}
> +
> +static void hsw_compute_wm_results(struct drm_device *dev,
> + struct hsw_pipe_wm_parameters *params,
> + uint32_t *wm,
> + struct hsw_wm_maximums *lp_maximums,
> + struct hsw_wm_values *results)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct drm_crtc *crtc;
> + struct hsw_lp_wm_result lp_results[4];
> + enum pipe pipe;
> + int i;
> +
> + hsw_compute_lp_wm(wm[1], lp_maximums, params, &lp_results[0]);
> + hsw_compute_lp_wm(wm[2], lp_maximums, params, &lp_results[1]);
> + hsw_compute_lp_wm(wm[3], lp_maximums, params, &lp_results[2]);
> + hsw_compute_lp_wm(wm[4], lp_maximums, params, &lp_results[3]);
> +
> + /* The spec says it is preferred to disable FBC WMs instead of disabling
> + * a WM level. */
> + results->enable_fbc_wm = true;
> + for (i = 0; i < 4; i++) {
> + if (lp_results[i].enable && !lp_results[i].fbc_enable) {
> + results->enable_fbc_wm = false;
> + break;
> + }
> + }
> +
> + if (lp_results[3].enable) {
> + results->wm_lp[2] = HSW_WM_LP_VAL(8, lp_results[3].fbc_val,
> + lp_results[3].pri_val,
> + lp_results[3].cur_val);
> + results->wm_lp_spr[2] = lp_results[3].spr_val;
> + } else if (lp_results[2].enable) {
> + results->wm_lp[2] = HSW_WM_LP_VAL(6, lp_results[2].fbc_val,
> + lp_results[2].pri_val,
> + lp_results[2].cur_val);
> + results->wm_lp_spr[2] = lp_results[2].spr_val;
> + } else {
> + results->wm_lp[2] = 0;
> + results->wm_lp_spr[2] = 0;
> + }
> +
> + if (lp_results[3].enable && lp_results[2].enable) {
> + results->wm_lp[1] = HSW_WM_LP_VAL(6, lp_results[2].fbc_val,
> + lp_results[2].pri_val,
> + lp_results[2].cur_val);
> + results->wm_lp_spr[1] = lp_results[2].spr_val;
> + } else if (!lp_results[3].enable && lp_results[1].enable) {
> + results->wm_lp[1] = HSW_WM_LP_VAL(4, lp_results[1].fbc_val,
> + lp_results[1].pri_val,
> + lp_results[1].cur_val);
> + results->wm_lp_spr[1] = lp_results[1].spr_val;
> + } else {
> + results->wm_lp[1] = 0;
> + results->wm_lp_spr[1] = 0;
> + }
> +
> + if (lp_results[0].enable) {
> + results->wm_lp[0] = HSW_WM_LP_VAL(2, lp_results[0].fbc_val,
> + lp_results[0].pri_val,
> + lp_results[0].cur_val);
> + results->wm_lp_spr[0] = lp_results[0].spr_val;
> + } else {
> + results->wm_lp[0] = 0;
> + results->wm_lp_spr[0] = 0;
> + }
> +
> + for_each_pipe(pipe)
> + results->wm_pipe[pipe] = hsw_compute_wm_pipe(dev_priv, wm[0],
> + pipe,
> + ¶ms[pipe]);
>
> for_each_pipe(pipe) {
> crtc = dev_priv->pipe_to_crtc_mapping[pipe];
> - haswell_update_linetime_wm(dev, crtc);
> + results->wm_linetime[pipe] = hsw_compute_linetime_wm(dev, crtc);
> + }
> +}
> +
> +/* Find the result with the highest level enabled. Check for enable_fbc_wm in
> + * case both are at the same level. Prefer r1 in case they're the same. */
> +struct hsw_wm_values *hsw_find_best_result(struct hsw_wm_values *r1,
> + struct hsw_wm_values *r2)
> +{
> + int i, val_r1 = 0, val_r2 = 0;
> +
> + for (i = 0; i < 3; i++) {
> + if (r1->wm_lp[i] & WM3_LP_EN)
> + val_r1 |= (1 << i);
> + if (r2->wm_lp[i] & WM3_LP_EN)
> + val_r2 |= (1 << i);
> + }
> +
> + if (val_r1 == val_r2) {
> + if (r2->enable_fbc_wm && !r1->enable_fbc_wm)
> + return r2;
> + else
> + return r1;
> + } else if (val_r1 > val_r2) {
> + return r1;
> + } else {
> + return r2;
> + }
> +}
> +
> +/*
> + * The spec says we shouldn't write when we don't need, because every write
> + * causes WMs to be re-evaluated, expending some power.
> + */
> +static void hsw_write_wm_values(struct drm_i915_private *dev_priv,
> + struct hsw_wm_values *results)
> +{
> + struct hsw_wm_values previous;
> + uint32_t val;
> +
> + val = I915_READ(DISP_ARB_CTL);
> + if (results->enable_fbc_wm)
> + val &= ~DISP_FBC_WM_DIS;
> + else
> + val |= DISP_FBC_WM_DIS;
> + I915_WRITE(DISP_ARB_CTL, val);
> +
> + previous.wm_pipe[0] = I915_READ(WM0_PIPEA_ILK);
> + previous.wm_pipe[1] = I915_READ(WM0_PIPEB_ILK);
> + previous.wm_pipe[2] = I915_READ(WM0_PIPEC_IVB);
> + previous.wm_lp[0] = I915_READ(WM1_LP_ILK);
> + previous.wm_lp[1] = I915_READ(WM2_LP_ILK);
> + previous.wm_lp[2] = I915_READ(WM3_LP_ILK);
> + previous.wm_lp_spr[0] = I915_READ(WM1S_LP_ILK);
> + previous.wm_lp_spr[1] = I915_READ(WM2S_LP_IVB);
> + previous.wm_lp_spr[2] = I915_READ(WM3S_LP_IVB);
> + previous.wm_linetime[0] = I915_READ(PIPE_WM_LINETIME(PIPE_A));
> + previous.wm_linetime[1] = I915_READ(PIPE_WM_LINETIME(PIPE_B));
> + previous.wm_linetime[2] = I915_READ(PIPE_WM_LINETIME(PIPE_C));
> +
> + if (memcmp(results->wm_pipe, previous.wm_pipe, 3) == 0 &&
> + memcmp(results->wm_lp, previous.wm_lp, 3) == 0 &&
> + memcmp(results->wm_lp_spr, previous.wm_lp_spr, 3) == 0 &&
> + memcmp(results->wm_linetime, previous.wm_linetime, 3) == 0)
> + return;
> +
> + if (previous.wm_lp[2] != 0)
> + I915_WRITE(WM3_LP_ILK, 0);
> + if (previous.wm_lp[1] != 0)
> + I915_WRITE(WM2_LP_ILK, 0);
> + if (previous.wm_lp[0] != 0)
> + I915_WRITE(WM1_LP_ILK, 0);
> +
> + if (previous.wm_pipe[0] != results->wm_pipe[0])
> + I915_WRITE(WM0_PIPEA_ILK, results->wm_pipe[0]);
> + if (previous.wm_pipe[1] != results->wm_pipe[1])
> + I915_WRITE(WM0_PIPEB_ILK, results->wm_pipe[1]);
> + if (previous.wm_pipe[2] != results->wm_pipe[2])
> + I915_WRITE(WM0_PIPEC_IVB, results->wm_pipe[2]);
> +
> + if (previous.wm_linetime[0] != results->wm_linetime[0])
> + I915_WRITE(PIPE_WM_LINETIME(PIPE_A), results->wm_linetime[0]);
> + if (previous.wm_linetime[1] != results->wm_linetime[1])
> + I915_WRITE(PIPE_WM_LINETIME(PIPE_B), results->wm_linetime[1]);
> + if (previous.wm_linetime[2] != results->wm_linetime[2])
> + I915_WRITE(PIPE_WM_LINETIME(PIPE_C), results->wm_linetime[2]);
> +
> + if (previous.wm_lp_spr[0] != results->wm_lp_spr[0])
> + I915_WRITE(WM1S_LP_ILK, results->wm_lp_spr[0]);
> + if (previous.wm_lp_spr[1] != results->wm_lp_spr[1])
> + I915_WRITE(WM2S_LP_IVB, results->wm_lp_spr[1]);
> + if (previous.wm_lp_spr[2] != results->wm_lp_spr[2])
> + I915_WRITE(WM3S_LP_IVB, results->wm_lp_spr[2]);
> +
> + if (results->wm_lp[0] != 0)
> + I915_WRITE(WM1_LP_ILK, results->wm_lp[0]);
> + if (results->wm_lp[1] != 0)
> + I915_WRITE(WM2_LP_ILK, results->wm_lp[1]);
> + if (results->wm_lp[2] != 0)
> + I915_WRITE(WM3_LP_ILK, results->wm_lp[2]);
> +}
> +
> +static void haswell_update_wm(struct drm_device *dev)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct hsw_wm_maximums lp_max_1_2, lp_max_5_6;
> + struct hsw_pipe_wm_parameters params[3];
> + struct hsw_wm_values results_1_2, results_5_6, *best_results;
> + uint32_t wm[5];
> +
> + hsw_compute_wm_parameters(dev, params, wm, &lp_max_1_2, &lp_max_5_6);
> +
> + hsw_compute_wm_results(dev, params, wm, &lp_max_1_2, &results_1_2);
> + if (lp_max_1_2.pri != lp_max_5_6.pri) {
> + hsw_compute_wm_results(dev, params, wm, &lp_max_5_6,
> + &results_5_6);
> + best_results = hsw_find_best_result(&results_1_2, &results_5_6);
> + } else {
> + best_results = &results_1_2;
> }
>
> - sandybridge_update_wm(dev);
> + hsw_write_wm_values(dev_priv, best_results);
> +}
> +
> +static void haswell_update_sprite_wm(struct drm_device *dev, int pipe,
> + uint32_t sprite_width, int pixel_size)
> +{
> + struct drm_plane *plane;
> +
> + list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
> + struct intel_plane *intel_plane = to_intel_plane(plane);
> +
> + if (intel_plane->pipe == pipe) {
> + intel_plane->wm.enable = true;
> + intel_plane->wm.horiz_pixels = sprite_width + 1;
> + intel_plane->wm.bytes_per_pixel = pixel_size;
> + break;
> + }
> + }
> +
> + haswell_update_wm(dev);
> }
>
> static bool
> @@ -4564,7 +5047,8 @@ void intel_init_pm(struct drm_device *dev)
> } else if (IS_HASWELL(dev)) {
> if (I915_READ64(MCH_SSKPD)) {
> dev_priv->display.update_wm = haswell_update_wm;
> - dev_priv->display.update_sprite_wm = sandybridge_update_sprite_wm;
> + dev_priv->display.update_sprite_wm =
> + haswell_update_sprite_wm;
> } else {
> DRM_DEBUG_KMS("Failed to read display plane latency. "
> "Disable CxSR\n");
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index 19b9cb9..95b39ef 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -335,8 +335,12 @@ ivb_disable_plane(struct drm_plane *plane)
>
> dev_priv->sprite_scaling_enabled &= ~(1 << pipe);
>
> + if (IS_HASWELL(dev))
> + intel_plane->wm.enable = false;
> +
> /* potentially re-enable LP watermarks */
> - if (scaling_was_enabled && !dev_priv->sprite_scaling_enabled)
> + if ((scaling_was_enabled && !dev_priv->sprite_scaling_enabled) ||
> + IS_HASWELL(dev))
> intel_update_watermarks(dev);
Maybe just add an 'enable' parameter to update_sprite_wm() instead an
call it for disable_plane too.
> }
>
> --
> 1.7.10.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list