[Intel-gfx] [PATCH] drm/i915/vlv: untangle integrated clock source handling

[Jesse Barnes]

The global integrated clock source bit resides in DPLL B on VLV, but we
were treating it as a per-pipe resource.  It needs to be set whenever
any PLL is active, so pull setting the bit out of vlv_update_pll and
into vlv_enable_pll.  Also add a vlv_disable_pll to prevent disabling it
when pipe B shuts down.

I'm guessing on the references here, I expect this to bite any config
where multiple displays are active or displays are moved from pipe to
pipe.

References: https://bugs.freedesktop.org/show_bug.cgi?id=67245
References: https://bugs.freedesktop.org/show_bug.cgi?id=69693
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0eeba84..def2473 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1386,6 +1386,13 @@ static void vlv_enable_pll(struct intel_crtc *crtc)
 	if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev))
 		assert_panel_unlocked(dev_priv, crtc->pipe);
 
+	/* Make sure to use the integrated clock source */
+	if (!crtc->pipe)
+		I915_WRITE(DPLL(1), I915_READ(DPLL(1)) |
+			   DPLL_INTEGRATED_CRI_CLK_VLV);
+	else
+		dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
 	I915_WRITE(reg, dpll);
 	POSTING_READ(reg);
 	udelay(150);
@@ -1476,6 +1483,20 @@ static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
 	POSTING_READ(DPLL(pipe));
 }
 
+static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+	u32 val = 0;
+
+	/* Make sure the pipe isn't still relying on us */
+	assert_pipe_disabled(dev_priv, pipe);
+
+	/* Leave integrated clock source enabled for the other pipe */
+	if (pipe)
+		val = I915_READ(DPLL(pipe)) & DPLL_INTEGRATED_CRI_CLK_VLV;
+	I915_WRITE(DPLL(pipe), val);
+	POSTING_READ(DPLL(pipe));
+}
+
 void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port)
 {
 	u32 port_mask;
@@ -3886,7 +3907,9 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 		if (encoder->post_disable)
 			encoder->post_disable(encoder);
 
-	if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
+	if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
+		vlv_disable_pll(dev_priv, pipe);
+	else if (!IS_VALLEYVIEW(dev))
 		i9xx_disable_pll(dev_priv, pipe);
 
 	intel_crtc->active = false;
@@ -4626,8 +4649,6 @@ static void vlv_update_pll(struct intel_crtc *crtc)
 	/* Enable DPIO clock input */
 	dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
 		DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
-	if (pipe)
-		dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
 
 	dpll |= DPLL_VCO_ENABLE;
 	crtc->config.dpll_hw_state.dpll = dpll;
-- 
1.8.3.1