[Intel-gfx] [PATCH 3/5] drm/i915: Displayport - Add function to enable/disable scrambling on the main link

[Todd Previte]

Adds a function to enable and disable scrambling directly for the main link.
This is functionality required to establish more fine-grained control over
the Displayport interface, both for operational reliability and
compliance testing.

Signed-off-by: Todd Previte <tprevite at gmail.com>
---
 drivers/gpu/drm/i915/intel_dp.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c865c32..1209de8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2372,6 +2372,33 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
 	*DP = (*DP & ~mask) | signal_levels;
 }
 
+void intel_dp_scrambler_disable(bool disable, struct intel_dp *intel_dp)
+{
+	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct drm_device *dev = intel_dig_port->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	// SNB is 0x40000. ILK is 0x4400
+	// IVB is 0x64000, HSW+ is 0x64040/0x64140
+	uint32_t ctrl_reg, reg_value;
+
+	if (HAS_DDI(dev))
+		ctrl_reg = DP_TP_CTL(intel_dig_port->port);
+	else
+		ctrl_reg = intel_dp->output_reg;
+
+	reg_value = I915_READ(ctrl_reg);
+
+	// Scrambling is bit 7 (scrambling on == 0)
+	if (disable)
+		reg_value |= DP_TP_CTL_SCRAMBLE_DISABLE;
+	else
+		reg_value &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
+
+	I915_WRITE(ctrl_reg, reg_value);
+	POSTING_READ(ctrl_reg);
+}
+
 bool 
 intel_dp_verify_link_status(DPLinkTrainingState state, 
 							uint8_t lane_count, 
-- 
1.8.3.2