[Intel-gfx] [PATCH 21/71] drm/i915/chv: Add update and enable pll for Cherryview
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Wed Apr 9 12:28:19 CEST 2014
From: Chon Ming Lee <chon.ming.lee at intel.com>
Added programming PLL for CHV based on "Application note for 1273 CHV
Display phy".
v2: -Break the common lane reset into another patch.
-Break the clock calculation into another patch.
-The changes are based on Ville review.
-Rework based on DPIO register define naming convention change.
-Break the dpio write into few lines to improve readability.
-Correct the udelay during chv_enable_pll.
-clean up some magic numbers with some new define.
-program the afc recal bit which was missed.
v3: Based on Ville review
- minor correction of the bit defination
- add deassert/propagate data lane reset
v4: Corrected the udelay between dclkp enable and pll enable.
Minor comment and better way to clear the TX lane reset.
v5: Squash in fixup from Rafael Barbalho.
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Chon Ming Lee <chon.ming.lee at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 70 ++++++++++++++++++
drivers/gpu/drm/i915/intel_display.c | 133 ++++++++++++++++++++++++++++++++++-
2 files changed, 201 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8fcf4ea..75f31f5 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -668,6 +668,12 @@ enum punit_power_well {
#define _VLV_PCS_DW9_CH1 0x8424
#define VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1)
+#define _CHV_PCS_DW10_CH0 0x8228
+#define _CHV_PCS_DW10_CH1 0x8428
+#define DPIO_PCS_SWING_CALC_TX0_TX2 (1<<30)
+#define DPIO_PCS_SWING_CALC_TX1_TX3 (1<<31)
+#define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1)
+
#define _VLV_PCS_DW11_CH0 0x822c
#define _VLV_PCS_DW11_CH1 0x842c
#define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1)
@@ -686,14 +692,21 @@ enum punit_power_well {
#define _VLV_TX_DW2_CH0 0x8288
#define _VLV_TX_DW2_CH1 0x8488
+#define DPIO_UNIQ_TRANS_SCALE_SHIFT 8
+#define DPIO_SWING_MARGIN_SHIFT 16
+#define DPIO_SWING_MARGIN_MASK (0xff << DPIO_SWING_MARGIN_SHIFT)
#define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1)
#define _VLV_TX_DW3_CH0 0x828c
#define _VLV_TX_DW3_CH1 0x848c
+/* The following bit for CHV phy */
+#define DPIO_TX_UNIQ_TRANS_SCALE_EN (1<<27)
#define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1)
#define _VLV_TX_DW4_CH0 0x8290
#define _VLV_TX_DW4_CH1 0x8490
+#define DPIO_SWING_DEEMPH9P5_SHIFT 24
+#define DPIO_SWING_DEEMPH9P5_MASK (0xff << DPIO_SWING_DEEMPH9P5_SHIFT)
#define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1)
#define _VLV_TX3_DW4_CH0 0x690
@@ -713,6 +726,62 @@ enum punit_power_well {
#define _VLV_TX_DW14_CH1 0x84b8
#define VLV_TX_DW14(ch) _PORT(ch, _VLV_TX_DW14_CH0, _VLV_TX_DW14_CH1)
+/* CHV dpPhy registers */
+#define _CHV_PLL_DW0_CH0 0x8000
+#define _CHV_PLL_DW0_CH1 0x8180
+#define CHV_PLL_DW0(ch) _PIPE(ch, _CHV_PLL_DW0_CH0, _CHV_PLL_DW0_CH1)
+
+#define _CHV_PLL_DW1_CH0 0x8004
+#define _CHV_PLL_DW1_CH1 0x8184
+#define DPIO_CHV_M1_DIV_BY_2 (0 << 0)
+#define DPIO_CHV_N_DIV_SHIFT (8)
+#define CHV_PLL_DW1(ch) _PIPE(ch, _CHV_PLL_DW1_CH0, _CHV_PLL_DW1_CH1)
+
+#define _CHV_PLL_DW2_CH0 0x8008
+#define _CHV_PLL_DW2_CH1 0x8188
+#define CHV_PLL_DW2(ch) _PIPE(ch, _CHV_PLL_DW2_CH0, _CHV_PLL_DW2_CH1)
+
+#define _CHV_PLL_DW3_CH0 0x800c
+#define _CHV_PLL_DW3_CH1 0x818c
+#define DPIO_CHV_FEEDFWD_GAIN 2
+#define DPIO_CHV_FIRST_MOD (0 << 8)
+#define DPIO_CHV_SECOND_MOD (1 << 8)
+#define DPIO_CHV_FRAC_DIV_EN (1 << 16)
+#define CHV_PLL_DW3(ch) _PIPE(ch, _CHV_PLL_DW3_CH0, _CHV_PLL_DW3_CH1)
+
+#define _CHV_PLL_DW6_CH0 0x8018
+#define _CHV_PLL_DW6_CH1 0x8198
+#define DPIO_CHV_PROP_COEFF (5 << 0)
+#define DPIO_CHV_GAIN_CTRL (2 << 16)
+#define DPIO_CHV_INT_COEFF_SHIFT 8
+#define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1)
+
+#define _CHV_CMN_DW13_CH0 0x8134
+#define _CHV_CMN_DW0_CH1 0x8080
+#define DPIO_CHV_S1_DIV_SELECT (21)
+#define DPIO_CHV_P1_SHIFT (13) /* 3 bits */
+#define DPIO_CHV_P2_SHIFT (8) /* 5 bits */
+#define DPIO_CHV_K_DIV_SHIFT (4)
+#define DPIO_PLL_LOCK 0x1
+#define DPIO_PLL_FREQLOCK 0x2
+#define CHV_CMN_DW13(ch) _PIPE(ch, _CHV_CMN_DW13_CH0, _CHV_CMN_DW0_CH1)
+
+#define _CHV_CMN_DW14_CH0 0x8138
+#define _CHV_CMN_DW1_CH1 0x8084
+#define DPIO_AFC_RECAL (1 << 14)
+#define DPIO_DCLKP_EN (1 << 13)
+#define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1)
+
+#define CHV_CMN_DW30 0x8178
+#define DPIO_LRC_BYPASS (1 << 3)
+
+#define _TXLANE(ch, lane, offset) ((ch ? 0x2400 : 0) + \
+ (lane) * 0x200 + (offset))
+
+#define CHV_TX_DW11(ch, lane) _TXLANE(ch, lane, 0xac)
+#define DPIO_FRC_LATENCY_SHFIT (8)
+#define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8)
+#define DPIO_UPAR_SHIFT (30)
/*
* Fence registers
*/
@@ -1383,6 +1452,7 @@ enum punit_power_well {
#define DPLL_LOCK_VLV (1<<15)
#define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14)
#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
+#define DPLL_SSC_REF_CLOCK_CHV (1<<13)
#define DPLL_PORTC_READY_MASK (0xf << 4)
#define DPLL_PORTB_READY_MASK (0xf)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d73fec5..36d6e212 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1549,6 +1549,49 @@ static void vlv_enable_pll(struct intel_crtc *crtc)
udelay(150); /* wait for warmup */
}
+static void chv_enable_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ int dpll = DPLL(crtc->pipe);
+ u32 tmp;
+
+ assert_pipe_disabled(dev_priv, crtc->pipe);
+
+ BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ /* Enable back the 10bit clock to display controller */
+ tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
+ tmp |= DPIO_DCLKP_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
+
+ /*
+ * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
+ */
+ udelay(1);
+
+ /* Enable PLL */
+ tmp = I915_READ(dpll);
+ tmp |= DPLL_VCO_ENABLE;
+ I915_WRITE(dpll, tmp);
+
+ /* Check PLL is locked */
+ if (wait_for(((I915_READ(dpll) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
+ DRM_ERROR("PLL %d failed to lock\n", pipe);
+
+ /* Deassert soft data lane reset*/
+ tmp = vlv_dpio_read(dev_priv, pipe, VLV_PCS_DW0(port));
+ tmp |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), tmp);
+
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
static void i9xx_enable_pll(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -4503,8 +4546,12 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI);
- if (!is_dsi)
- vlv_enable_pll(intel_crtc);
+ if (!is_dsi) {
+ if (IS_CHERRYVIEW(dev))
+ chv_enable_pll(intel_crtc);
+ else
+ vlv_enable_pll(intel_crtc);
+ }
for_each_encoder_on_crtc(dev, crtc, encoder)
if (encoder->pre_enable)
@@ -5385,6 +5432,86 @@ static void vlv_update_pll(struct intel_crtc *crtc)
mutex_unlock(&dev_priv->dpio_lock);
}
+static void chv_update_pll(struct intel_crtc *crtc)
+{
+ struct drm_device *dev = crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = crtc->pipe;
+ int dpll_reg = DPLL(crtc->pipe);
+ enum dpio_channel port = vlv_pipe_to_channel(pipe);
+ u32 val, loopfilter, intcoeff;
+ u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
+ int refclk;
+
+ mutex_lock(&dev_priv->dpio_lock);
+
+ bestn = crtc->config.dpll.n;
+ bestm2_frac = crtc->config.dpll.m2 & 0x3fffff;
+ bestm1 = crtc->config.dpll.m1;
+ bestm2 = crtc->config.dpll.m2 >> 22;
+ bestp1 = crtc->config.dpll.p1;
+ bestp2 = crtc->config.dpll.p2;
+
+ /*
+ * Enable Refclk and SSC
+ */
+ val = I915_READ(dpll_reg);
+ val |= (DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV);
+ I915_WRITE(dpll_reg, val);
+
+ /* Propagate soft reset to data lane reset */
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS_DW0(port));
+ val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), val);
+
+ /* Disable 10bit clock to display controller */
+ val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
+ val &= ~DPIO_DCLKP_EN;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
+
+ /* p1 and p2 divider */
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
+ 5 << DPIO_CHV_S1_DIV_SELECT |
+ bestp1 << DPIO_CHV_P1_SHIFT |
+ bestp2 << DPIO_CHV_P2_SHIFT |
+ 1 << DPIO_CHV_K_DIV_SHIFT);
+
+ /* Feedback post-divider - m2 */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
+
+ /* Feedback refclk divider - n and m1 */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
+ DPIO_CHV_M1_DIV_BY_2 |
+ 1 << DPIO_CHV_N_DIV_SHIFT);
+
+ /* M2 fraction division */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
+
+ /* M2 fraction division enable */
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
+ DPIO_CHV_FRAC_DIV_EN |
+ DPIO_CHV_FEEDFWD_GAIN);
+
+ /* Loop filter */
+ refclk = i9xx_get_refclk(&crtc->base, 0);
+ loopfilter = DPIO_CHV_PROP_COEFF | DPIO_CHV_GAIN_CTRL;
+ if (refclk == 100000)
+ intcoeff = 11;
+ else if (refclk == 38400)
+ intcoeff = 10;
+ else
+ intcoeff = 9;
+ loopfilter |= (intcoeff << DPIO_CHV_INT_COEFF_SHIFT);
+ vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
+
+ /* AFC Recal */
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
+ vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
+ DPIO_AFC_RECAL);
+
+ mutex_unlock(&dev_priv->dpio_lock);
+}
+
static void i9xx_update_pll(struct intel_crtc *crtc,
intel_clock_t *reduced_clock,
int num_connectors)
@@ -5768,6 +5895,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
i8xx_update_pll(intel_crtc,
has_reduced_clock ? &reduced_clock : NULL,
num_connectors);
+ } else if (IS_CHERRYVIEW(dev)) {
+ chv_update_pll(intel_crtc);
} else if (IS_VALLEYVIEW(dev)) {
vlv_update_pll(intel_crtc);
} else {
--
1.8.3.2
More information about the Intel-gfx
mailing list