[Intel-gfx] [PATCH 20/71] drm/i915/chv: find the best divisor for the target clock v4
Imre Deak
imre.deak at intel.com
Tue Apr 29 16:56:52 CEST 2014
On Wed, 2014-04-09 at 13:28 +0300, ville.syrjala at linux.intel.com wrote:
> From: Chon Ming Lee <chon.ming.lee at intel.com>
>
> Based on the chv clock limit, find the best divisor.
>
> The divisor data has been verified with this spreadsheet.
> P1273_DPLL_Programming Spreadsheet.
>
> v2: Rebase the code and change the chv_find_best_dpll based on new
> standard way to use intel_PLL_is_valid. Besides, clean up some extra
> variables.
>
> v3: Ville suggest better fixed point for m2 calculation.
>
> v4: -Add comment for the limit is compute using fast clock. (Ville)
> -Don't pass the request clock to chv_clock, as the same function will
> be use clock readout, which doens't have request clock. (Ville)
> -Add and use DIV_ROUND_CLOSEST_ULL to consistent with other clock
> calculation. (Ville)
> -Fix the dp m2 after m2 has stored fixed point. (Ville)
>
> Signed-off-by: Chon Ming Lee <chon.ming.lee at intel.com>
> [vsyrjala: Avoid div-by-zero in chv_clock()]
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Took a while to understand all the different clock rates along the path,
but it looks ok:
Reviewed-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 86 ++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++
> 2 files changed, 107 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index e33667d..d73fec5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -41,6 +41,9 @@
> #include <drm/drm_crtc_helper.h>
> #include <linux/dma_remapping.h>
>
> +#define DIV_ROUND_CLOSEST_ULL(ll, d) \
> + ({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; })
> +
> static void intel_increase_pllclock(struct drm_crtc *crtc);
> static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
>
> @@ -328,6 +331,22 @@ static const intel_limit_t intel_limits_vlv = {
> .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
> };
>
> +static const intel_limit_t intel_limits_chv = {
> + /*
> + * These are the data rate limits (measured in fast clocks)
> + * since those are the strictest limits we have. The fast
> + * clock and actual rate limits are more relaxed, so checking
> + * them would make no difference.
> + */
> + .dot = { .min = 25000 * 5, .max = 540000 * 5},
> + .vco = { .min = 4860000, .max = 6700000 },
> + .n = { .min = 1, .max = 1 },
> + .m1 = { .min = 2, .max = 2 },
> + .m2 = { .min = 24 << 22, .max = 175 << 22 },
> + .p1 = { .min = 2, .max = 4 },
> + .p2 = { .p2_slow = 1, .p2_fast = 14 },
> +};
> +
> static void vlv_clock(int refclk, intel_clock_t *clock)
> {
> clock->m = clock->m1 * clock->m2;
> @@ -412,6 +431,8 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
> limit = &intel_limits_pineview_lvds;
> else
> limit = &intel_limits_pineview_sdvo;
> + } else if (IS_CHERRYVIEW(dev)) {
> + limit = &intel_limits_chv;
> } else if (IS_VALLEYVIEW(dev)) {
> limit = &intel_limits_vlv;
> } else if (!IS_GEN2(dev)) {
> @@ -456,6 +477,17 @@ static void i9xx_clock(int refclk, intel_clock_t *clock)
> clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
> }
>
> +static void chv_clock(int refclk, intel_clock_t *clock)
> +{
> + clock->m = clock->m1 * clock->m2;
> + clock->p = clock->p1 * clock->p2;
> + if (WARN_ON(clock->n == 0 || clock->p == 0))
> + return;
> + clock->vco = DIV_ROUND_CLOSEST_ULL((uint64_t)refclk * clock->m,
> + clock->n << 22);
> + clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
> +}
> +
> #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
> /**
> * Returns whether the given set of divisors are valid for a given refclk with
> @@ -731,6 +763,58 @@ vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
> return found;
> }
>
> +static bool
> +chv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc,
> + int target, int refclk, intel_clock_t *match_clock,
> + intel_clock_t *best_clock)
> +{
> + struct drm_device *dev = crtc->dev;
> + intel_clock_t clock;
> + uint64_t m2;
> + int found = false;
> +
> + memset(best_clock, 0, sizeof(*best_clock));
> +
> + /*
> + * Based on hardware doc, the n always set to 1, and m1 always
> + * set to 2. If requires to support 200Mhz refclk, we need to
> + * revisit this because n may not 1 anymore.
> + */
> + clock.n = 1, clock.m1 = 2;
> + target *= 5; /* fast clock */
> +
> + for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
> + for (clock.p2 = limit->p2.p2_fast;
> + clock.p2 >= limit->p2.p2_slow;
> + clock.p2 -= clock.p2 > 10 ? 2 : 1) {
> +
> + clock.p = clock.p1 * clock.p2;
> +
> + m2 = DIV_ROUND_CLOSEST_ULL(((uint64_t)target * clock.p *
> + clock.n) << 22, refclk * clock.m1);
> +
> + if (m2 > INT_MAX/clock.m1)
> + continue;
> +
> + clock.m2 = m2;
> +
> + chv_clock(refclk, &clock);
> +
> + if (!intel_PLL_is_valid(dev, limit, &clock))
> + continue;
> +
> + /* based on hardware requirement, prefer bigger p
> + */
> + if (clock.p > best_clock->p) {
> + *best_clock = clock;
> + found = true;
> + }
> + }
> + }
> +
> + return found;
> +}
> +
> bool intel_crtc_active(struct drm_crtc *crtc)
> {
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> @@ -11031,6 +11115,8 @@ static void intel_init_display(struct drm_device *dev)
>
> if (HAS_PCH_SPLIT(dev) || IS_G4X(dev))
> dev_priv->display.find_dpll = g4x_find_best_dpll;
> + else if (IS_CHERRYVIEW(dev))
> + dev_priv->display.find_dpll = chv_find_best_dpll;
> else if (IS_VALLEYVIEW(dev))
> dev_priv->display.find_dpll = vlv_find_best_dpll;
> else if (IS_PINEVIEW(dev))
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index c33971e..6be7b35 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -64,6 +64,24 @@ static const struct dp_link_dpll vlv_dpll[] = {
> { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
> };
>
> +/*
> + * CHV supports eDP 1.4 that have more link rates.
> + * Below only provides the fixed rate but exclude variable rate.
> + */
> +static const struct dp_link_dpll chv_dpll[] = {
> + /*
> + * CHV requires to program fractional division for m2.
> + * m2 is stored in fixed point format using formula below
> + * (m2_int << 22) | m2_fraction
> + */
> + { DP_LINK_BW_1_62, /* m2_int = 32, m2_fraction = 1677722 */
> + { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
> + { DP_LINK_BW_2_7, /* m2_int = 27, m2_fraction = 0 */
> + { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
> + { DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */
> + { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
> +};
> +
> /**
> * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
> * @intel_dp: DP struct
> @@ -720,6 +738,9 @@ intel_dp_set_clock(struct intel_encoder *encoder,
> } else if (HAS_PCH_SPLIT(dev)) {
> divisor = pch_dpll;
> count = ARRAY_SIZE(pch_dpll);
> + } else if (IS_CHERRYVIEW(dev)) {
> + divisor = chv_dpll;
> + count = ARRAY_SIZE(chv_dpll);
> } else if (IS_VALLEYVIEW(dev)) {
> divisor = vlv_dpll;
> count = ARRAY_SIZE(vlv_dpll);
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20140429/30865403/attachment.sig>
More information about the Intel-gfx
mailing list