[Intel-gfx] [PATCH 2/2] drm/i915: Set up SDVO encoder type only at detect
Egbert Eich
eich at suse.de
Mon Apr 14 19:26:09 CEST 2014
Depending on the SDVO output_flags SDVO may have multiple connectors.
These are all initialized in intel_sdvo_output_setup(). The connector
that is initialized later will override the encoder_type that has been
set up by an earlier connector type initialization. Eventually the
one that comes last wins.
Eventually when intel_sdvo_detect() is called the active connector is
determined.
Delay encoder type initialization until the active connector is known
and set it to the type that corresponds to this connector.
Signed-off-by: Egbert Eich <eich at suse.de>
---
drivers/gpu/drm/i915/intel_sdvo.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d27155a..5043f16 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -154,6 +154,9 @@ struct intel_sdvo_connector {
/* Mark the type of connector */
uint16_t output_flag;
+ /* store encoder type for convenience */
+ int encoder_type;
+
enum hdmi_force_audio force_audio;
/* This contains all current supported TV format */
@@ -1746,6 +1749,7 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
if (response == 0)
return connector_status_disconnected;
+ intel_sdvo->base.base.encoder_type = intel_sdvo_connector->encoder_type;
intel_sdvo->attached_output = response;
intel_sdvo->has_hdmi_monitor = false;
@@ -2489,7 +2493,9 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
} else {
intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
}
- encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
+ /* delay encoder_type setting until detection */
+ intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_TMDS;
+ encoder->encoder_type = DRM_MODE_ENCODER_NONE;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
@@ -2524,7 +2530,9 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
- encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
+ /* delay encoder_type setting until detection */
+ intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_TVDAC;
+ encoder->encoder_type = DRM_MODE_ENCODER_NONE;
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
intel_sdvo->controlled_output |= type;
@@ -2568,7 +2576,9 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
- encoder->encoder_type = DRM_MODE_ENCODER_DAC;
+ /* delay encoder_type setting until detection */
+ intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_DAC;
+ encoder->encoder_type = DRM_MODE_ENCODER_NONE;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
if (device == 0) {
@@ -2603,7 +2613,9 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
- encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
+ /* delay encoder_type setting until detection */
+ intel_sdvo_connector->encoder_type = DRM_MODE_ENCODER_LVDS;
+ encoder->encoder_type = DRM_MODE_ENCODER_NONE;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
if (device == 0) {
@@ -2984,7 +2996,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
/* encoder type will be decided later */
intel_encoder = &intel_sdvo->base;
intel_encoder->type = INTEL_OUTPUT_SDVO;
- drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs, 0);
+ drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs,
+ DRM_MODE_ENCODER_NONE);
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
--
1.8.4.5
More information about the Intel-gfx
mailing list