[Intel-gfx] [PATCH v2] drm/i915: Rename defines for selection of ddi buffer translation slot
sonika.jindal at intel.com
sonika.jindal at intel.com
Fri Aug 8 14:17:25 CEST 2014
From: Sonika Jindal <sonika.jindal at intel.com>
Renaming the HSW-specific macros for ddi buffer translation slot to denote the
slot and not the vswing/pre-emph values as they are platform-dependent.
This patch is based on top of the patch series for renaming the DP training
vswing/pre-emph defines:
http://lists.freedesktop.org/archives/intel-gfx/2014-August/050407.html
v2: Creating single macro with argument for slot number (Damien)
Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 10 +---------
drivers/gpu/drm/i915/intel_ddi.c | 19 +++----------------
drivers/gpu/drm/i915/intel_dp.c | 18 +++++++++---------
3 files changed, 13 insertions(+), 34 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 7a6cc69..7366aac 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5966,15 +5966,7 @@ enum punit_power_well {
#define DDI_BUF_CTL_B 0x64100
#define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
#define DDI_BUF_CTL_ENABLE (1<<31)
-#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */
-#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */
-#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */
-#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */
-#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */
-#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */
-#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */
-#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */
-#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */
+#define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
#define DDI_BUF_EMP_MASK (0xf<<24)
#define DDI_BUF_PORT_REVERSAL (1<<16)
#define DDI_BUF_IS_IDLE (1<<7)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index ca1f9a8..493cf3a 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -241,18 +241,6 @@ void intel_prepare_ddi(struct drm_device *dev)
intel_prepare_ddi_buffers(dev, port);
}
-static const long hsw_ddi_buf_ctl_values[] = {
- DDI_BUF_EMP_400MV_0DB_HSW,
- DDI_BUF_EMP_400MV_3_5DB_HSW,
- DDI_BUF_EMP_400MV_6DB_HSW,
- DDI_BUF_EMP_400MV_9_5DB_HSW,
- DDI_BUF_EMP_600MV_0DB_HSW,
- DDI_BUF_EMP_600MV_3_5DB_HSW,
- DDI_BUF_EMP_600MV_6DB_HSW,
- DDI_BUF_EMP_800MV_0DB_HSW,
- DDI_BUF_EMP_800MV_3_5DB_HSW
-};
-
static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
enum port port)
{
@@ -275,7 +263,6 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
* please note that when FDI mode is active on DDI E, it shares 2 lines with
* DDI A (which is used for eDP)
*/
-
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
@@ -312,7 +299,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
/* Start the training iterating through available voltages and emphasis,
* testing each value twice. */
- for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
+ for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
@@ -327,7 +314,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
((intel_crtc->config.fdi_lanes - 1) << 1) |
- hsw_ddi_buf_ctl_values[i / 2]);
+ DDI_BUF_TRANS_SELECT(i / 2));
POSTING_READ(DDI_BUF_CTL(PORT_E));
udelay(600);
@@ -402,7 +389,7 @@ void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)
enc_to_dig_port(&encoder->base);
intel_dp->DP = intel_dig_port->saved_port_bits |
- DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+ DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0);
intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 01f264c..7215cfe 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2842,25 +2842,25 @@ intel_hsw_signal_levels(uint8_t train_set)
DP_TRAIN_PRE_EMPHASIS_MASK);
switch (signal_levels) {
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_EMP_400MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(0);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- return DDI_BUF_EMP_400MV_3_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(1);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2:
- return DDI_BUF_EMP_400MV_6DB_HSW;
+ return DDI_BUF_TRANS_SELECT(2);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3:
- return DDI_BUF_EMP_400MV_9_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(3);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_EMP_600MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(4);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- return DDI_BUF_EMP_600MV_3_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(5);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2:
- return DDI_BUF_EMP_600MV_6DB_HSW;
+ return DDI_BUF_TRANS_SELECT(6);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0:
- return DDI_BUF_EMP_800MV_0DB_HSW;
+ return DDI_BUF_TRANS_SELECT(7);
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1:
- return DDI_BUF_EMP_800MV_3_5DB_HSW;
+ return DDI_BUF_TRANS_SELECT(8);
default:
DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
"0x%x\n", signal_levels);
--
1.7.10.4
More information about the Intel-gfx
mailing list