[Intel-gfx] [PATCH 3/7] drm/exynos: Renaming DP training vswing pre emph defines

[Jingoo Han]

On Thursday, August 28, 2014 1:33 PM, Sonika Sonika wrote:
> On 8/28/2014 6:25 AM, Jingoo Han wrote:
> > On Friday, August 08, 2014 7:54 PM, Sonika Jindal wrote:
> >>
> >> From: Sonika Jindal <sonika.jindal at intel.com>
> >>
> >> Rename the defines to have levels instead of values for vswing and
> >> pre-emph levels as the values may differ in other scenarios like low vswing of
> >> eDP1.4 where the values are different.
> >>
> >> Done using following cocci patch for each define:
> >> @@
> >> @@
> >>
> >>   # define DP_TRAIN_VOLTAGE_SWING_400     (0 << 0)
> >> + # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0     (0 << 0)
> >>
> >> ...
> >>
> >> Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
> >> ---
> >>   drivers/gpu/drm/exynos/exynos_dp_core.c |    4 ++--
> >>   1 file changed, 2 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c
> >> index 4f3c7eb..02602a8 100644
> >> --- a/drivers/gpu/drm/exynos/exynos_dp_core.c
> >> +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
> >> @@ -329,8 +329,8 @@ static int exynos_dp_link_start(struct exynos_dp_device *dp)
> >>   		return retval;
> >>
> >>   	for (lane = 0; lane < lane_count; lane++)
> >> -		buf[lane] = DP_TRAIN_PRE_EMPHASIS_0 |
> >> -			    DP_TRAIN_VOLTAGE_SWING_400;
> >> +		buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 |
> >> +			    DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
> >
> > NAK!
> >
> > It makes build error. Please build your patch, before sending the patch.
> > It is a rule when submitting patches.
> >
> > Please, fix it as follows.
> >
> > +		buf[lane] = DP_TRAIN_PRE_EMPHASIS_LEVEL_0|
> > +			    DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
> >
> I think the first patch which you have taken (which adds new defines) is
> the one from the previous series for the same change. In the second
> version, I have named them as DP_TRAIN_PRE_EMPH_LEVEL_* which was done
> using cocci. Following is from that patch:

Oh, I see. Sorry for annoying you.
However, how about tagging V2, V3.. into patches? For instance,
'[PATCH V2 3/7] drm/exynos: Renaming DP training vswing pre emph defines'
It will be helpful, in order to prevent the same mistakes happening again.

Also, the patch looks good.
Acked-by: Jingoo Han <jg1.han at samsung.com>

Best regards,
Jingoo Han

>   # define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
> +# define DP_TRAIN_PRE_EMPH_LEVEL_0		(0 << 3)
>   # define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
> +# define DP_TRAIN_PRE_EMPH_LEVEL_1		(1 << 3)
>   # define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
> +# define DP_TRAIN_PRE_EMPH_LEVEL_2		(2 << 3)
>   # define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
> +# define DP_TRAIN_PRE_EMPH_LEVEL_3		(3 << 3)
> > Best regards,
> > Jingoo Han
> >
> >>
> >>   	retval = exynos_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET,
> >>   			lane_count, buf);
> >> --
> >> 1.7.10.4
> >