[Intel-gfx] [PATCH 08/19] drm/i915: get port power domain in connector detect
Imre Deak
imre.deak at intel.com
Mon Feb 17 23:02:09 CET 2014
The connector detect and get_mode handlers need to access the port
specific HW blocks to read the EDID etc. Get/put the port power domains
around these handlers.
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/intel_crt.c | 42 ++++++++++++++++++++++++++++++++--------
drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++---
drivers/gpu/drm/i915/intel_dsi.c | 13 ++++++++++++-
3 files changed, 59 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9864aa1..2a38429 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -630,7 +630,10 @@ static enum drm_connector_status
intel_crt_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crt *crt = intel_attached_crt(connector);
+ struct intel_encoder *intel_encoder = &crt->base;
+ enum intel_display_power_domain power_domain;
enum drm_connector_status status;
struct intel_load_detect_pipe tmp;
@@ -638,6 +641,11 @@ intel_crt_detect(struct drm_connector *connector, bool force)
connector->base.id, drm_get_connector_name(connector),
force);
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
+ status = connector_status_connected;
+
if (I915_HAS_HOTPLUG(dev)) {
/* We can not rely on the HPD pin always being correctly wired
* up, for example many KVM do not pass it through, and so
@@ -645,23 +653,27 @@ intel_crt_detect(struct drm_connector *connector, bool force)
*/
if (intel_crt_detect_hotplug(connector)) {
DRM_DEBUG_KMS("CRT detected via hotplug\n");
- return connector_status_connected;
+ goto out;
} else
DRM_DEBUG_KMS("CRT not detected via hotplug\n");
}
if (intel_crt_detect_ddc(connector))
- return connector_status_connected;
+ goto out;
/* Load detection is broken on HPD capable machines. Whoever wants a
* broken monitor (without edid) to work behind a broken kvm (that fails
* to have the right resistors for HP detection) needs to fix this up.
* For now just bail out. */
- if (I915_HAS_HOTPLUG(dev))
- return connector_status_disconnected;
+ if (I915_HAS_HOTPLUG(dev)) {
+ status = connector_status_disconnected;
+ goto out;
+ }
- if (!force)
- return connector->status;
+ if (!force) {
+ status = connector->status;
+ goto out;
+ }
/* for pre-945g platforms use load detect */
if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
@@ -673,6 +685,9 @@ intel_crt_detect(struct drm_connector *connector, bool force)
} else
status = connector_status_unknown;
+out:
+ intel_display_power_put(dev_priv, power_domain);
+
return status;
}
@@ -686,17 +701,28 @@ static int intel_crt_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crt *crt = intel_attached_crt(connector);
+ struct intel_encoder *intel_encoder = &crt->base;
+ enum intel_display_power_domain power_domain;
int ret;
struct i2c_adapter *i2c;
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
ret = intel_crt_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev))
- return ret;
+ goto out;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
- return intel_crt_ddc_get_modes(connector, i2c);
+ ret = intel_crt_ddc_get_modes(connector, i2c);
+
+out:
+ intel_display_power_put(dev_priv, power_domain);
+
+ return ret;
}
static int intel_crt_set_property(struct drm_connector *connector,
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f53c95c..9c39425 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3224,9 +3224,11 @@ intel_dp_detect(struct drm_connector *connector, bool force)
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum drm_connector_status status;
+ enum intel_display_power_domain power_domain;
struct edid *edid = NULL;
- intel_runtime_pm_get(dev_priv);
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, drm_get_connector_name(connector));
@@ -3256,23 +3258,31 @@ intel_dp_detect(struct drm_connector *connector, bool force)
if (intel_encoder->type != INTEL_OUTPUT_EDP)
intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
status = connector_status_connected;
-
out:
- intel_runtime_pm_put(dev_priv);
+ intel_display_power_put(dev_priv, power_domain);
+
return status;
}
static int intel_dp_get_modes(struct drm_connector *connector)
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct intel_encoder *intel_encoder = &intel_dig_port->base;
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum intel_display_power_domain power_domain;
int ret;
/* We should parse the EDID data and find out if it has an audio sink
*/
+ power_domain = intel_display_port_power_domain(intel_encoder);
+ intel_display_power_get(dev_priv, power_domain);
+
ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
+ intel_display_power_put(dev_priv, power_domain);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3ee1db1..63b95bbd 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -488,8 +488,19 @@ static enum drm_connector_status
intel_dsi_detect(struct drm_connector *connector, bool force)
{
struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
+ struct intel_encoder *intel_encoder = &intel_dsi->base;
+ enum intel_display_power_domain power_domain;
+ enum drm_connector_status connector_status;
+ struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
+
DRM_DEBUG_KMS("\n");
- return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+ power_domain = intel_display_port_power_domain(intel_encoder);
+
+ intel_display_power_get(dev_priv, power_domain);
+ connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
+ intel_display_power_put(dev_priv, power_domain);
+
+ return connector_status;
}
static int intel_dsi_get_modes(struct drm_connector *connector)
--
1.8.4
More information about the Intel-gfx
mailing list