[Intel-gfx] [PATCH 08/19] drm/i915: get port power domain in connector detect
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Feb 19 13:35:08 CET 2014
On Tue, Feb 18, 2014 at 12:02:09AM +0200, Imre Deak wrote:
> The connector detect and get_mode handlers need to access the port
> specific HW blocks to read the EDID etc. Get/put the port power domains
> around these handlers.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/intel_crt.c | 42 ++++++++++++++++++++++++++++++++--------
> drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++---
> drivers/gpu/drm/i915/intel_dsi.c | 13 ++++++++++++-
And what about HDMI?
> 3 files changed, 59 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index 9864aa1..2a38429 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -630,7 +630,10 @@ static enum drm_connector_status
> intel_crt_detect(struct drm_connector *connector, bool force)
> {
> struct drm_device *dev = connector->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_crt *crt = intel_attached_crt(connector);
> + struct intel_encoder *intel_encoder = &crt->base;
> + enum intel_display_power_domain power_domain;
> enum drm_connector_status status;
> struct intel_load_detect_pipe tmp;
>
> @@ -638,6 +641,11 @@ intel_crt_detect(struct drm_connector *connector, bool force)
> connector->base.id, drm_get_connector_name(connector),
> force);
>
> + power_domain = intel_display_port_power_domain(intel_encoder);
> + intel_display_power_get(dev_priv, power_domain);
> +
> + status = connector_status_connected;
> +
> if (I915_HAS_HOTPLUG(dev)) {
> /* We can not rely on the HPD pin always being correctly wired
> * up, for example many KVM do not pass it through, and so
> @@ -645,23 +653,27 @@ intel_crt_detect(struct drm_connector *connector, bool force)
> */
> if (intel_crt_detect_hotplug(connector)) {
> DRM_DEBUG_KMS("CRT detected via hotplug\n");
> - return connector_status_connected;
> + goto out;
> } else
> DRM_DEBUG_KMS("CRT not detected via hotplug\n");
> }
>
> if (intel_crt_detect_ddc(connector))
> - return connector_status_connected;
> + goto out;
>
> /* Load detection is broken on HPD capable machines. Whoever wants a
> * broken monitor (without edid) to work behind a broken kvm (that fails
> * to have the right resistors for HP detection) needs to fix this up.
> * For now just bail out. */
> - if (I915_HAS_HOTPLUG(dev))
> - return connector_status_disconnected;
> + if (I915_HAS_HOTPLUG(dev)) {
> + status = connector_status_disconnected;
> + goto out;
> + }
>
> - if (!force)
> - return connector->status;
> + if (!force) {
> + status = connector->status;
> + goto out;
> + }
>
> /* for pre-945g platforms use load detect */
> if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
> @@ -673,6 +685,9 @@ intel_crt_detect(struct drm_connector *connector, bool force)
> } else
> status = connector_status_unknown;
>
> +out:
> + intel_display_power_put(dev_priv, power_domain);
> +
> return status;
> }
>
> @@ -686,17 +701,28 @@ static int intel_crt_get_modes(struct drm_connector *connector)
> {
> struct drm_device *dev = connector->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crt *crt = intel_attached_crt(connector);
> + struct intel_encoder *intel_encoder = &crt->base;
> + enum intel_display_power_domain power_domain;
> int ret;
> struct i2c_adapter *i2c;
>
> + power_domain = intel_display_port_power_domain(intel_encoder);
> + intel_display_power_get(dev_priv, power_domain);
> +
> i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
> ret = intel_crt_ddc_get_modes(connector, i2c);
> if (ret || !IS_G4X(dev))
> - return ret;
> + goto out;
>
> /* Try to probe digital port for output in DVI-I -> VGA mode. */
> i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
> - return intel_crt_ddc_get_modes(connector, i2c);
> + ret = intel_crt_ddc_get_modes(connector, i2c);
> +
> +out:
> + intel_display_power_put(dev_priv, power_domain);
> +
> + return ret;
> }
>
> static int intel_crt_set_property(struct drm_connector *connector,
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index f53c95c..9c39425 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3224,9 +3224,11 @@ intel_dp_detect(struct drm_connector *connector, bool force)
> struct drm_device *dev = connector->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> enum drm_connector_status status;
> + enum intel_display_power_domain power_domain;
> struct edid *edid = NULL;
>
> - intel_runtime_pm_get(dev_priv);
> + power_domain = intel_display_port_power_domain(intel_encoder);
> + intel_display_power_get(dev_priv, power_domain);
>
> DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> connector->base.id, drm_get_connector_name(connector));
> @@ -3256,23 +3258,31 @@ intel_dp_detect(struct drm_connector *connector, bool force)
> if (intel_encoder->type != INTEL_OUTPUT_EDP)
> intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
> status = connector_status_connected;
> -
> out:
> - intel_runtime_pm_put(dev_priv);
> + intel_display_power_put(dev_priv, power_domain);
> +
> return status;
> }
>
> static int intel_dp_get_modes(struct drm_connector *connector)
> {
> struct intel_dp *intel_dp = intel_attached_dp(connector);
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct intel_encoder *intel_encoder = &intel_dig_port->base;
> struct intel_connector *intel_connector = to_intel_connector(connector);
> struct drm_device *dev = connector->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + enum intel_display_power_domain power_domain;
> int ret;
>
> /* We should parse the EDID data and find out if it has an audio sink
> */
>
> + power_domain = intel_display_port_power_domain(intel_encoder);
> + intel_display_power_get(dev_priv, power_domain);
> +
> ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
> + intel_display_power_put(dev_priv, power_domain);
> if (ret)
> return ret;
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 3ee1db1..63b95bbd 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -488,8 +488,19 @@ static enum drm_connector_status
> intel_dsi_detect(struct drm_connector *connector, bool force)
> {
> struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
> + struct intel_encoder *intel_encoder = &intel_dsi->base;
> + enum intel_display_power_domain power_domain;
> + enum drm_connector_status connector_status;
> + struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
> +
> DRM_DEBUG_KMS("\n");
> - return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
> + power_domain = intel_display_port_power_domain(intel_encoder);
> +
> + intel_display_power_get(dev_priv, power_domain);
> + connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
> + intel_display_power_put(dev_priv, power_domain);
> +
> + return connector_status;
> }
>
> static int intel_dsi_get_modes(struct drm_connector *connector)
> --
> 1.8.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list