[Intel-gfx] [PATCH 08/19] drm/i915: get port power domain in connector detect
Imre Deak
imre.deak at intel.com
Wed Feb 19 13:39:58 CET 2014
On Wed, 2014-02-19 at 14:35 +0200, Ville Syrjälä wrote:
> On Tue, Feb 18, 2014 at 12:02:09AM +0200, Imre Deak wrote:
> > The connector detect and get_mode handlers need to access the port
> > specific HW blocks to read the EDID etc. Get/put the port power domains
> > around these handlers.
> >
> > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_crt.c | 42 ++++++++++++++++++++++++++++++++--------
> > drivers/gpu/drm/i915/intel_dp.c | 16 ++++++++++++---
> > drivers/gpu/drm/i915/intel_dsi.c | 13 ++++++++++++-
>
> And what about HDMI?
Good catch, I missed that one.
--Imre
> > 3 files changed, 59 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> > index 9864aa1..2a38429 100644
> > --- a/drivers/gpu/drm/i915/intel_crt.c
> > +++ b/drivers/gpu/drm/i915/intel_crt.c
> > @@ -630,7 +630,10 @@ static enum drm_connector_status
> > intel_crt_detect(struct drm_connector *connector, bool force)
> > {
> > struct drm_device *dev = connector->dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_crt *crt = intel_attached_crt(connector);
> > + struct intel_encoder *intel_encoder = &crt->base;
> > + enum intel_display_power_domain power_domain;
> > enum drm_connector_status status;
> > struct intel_load_detect_pipe tmp;
> >
> > @@ -638,6 +641,11 @@ intel_crt_detect(struct drm_connector *connector, bool force)
> > connector->base.id, drm_get_connector_name(connector),
> > force);
> >
> > + power_domain = intel_display_port_power_domain(intel_encoder);
> > + intel_display_power_get(dev_priv, power_domain);
> > +
> > + status = connector_status_connected;
> > +
> > if (I915_HAS_HOTPLUG(dev)) {
> > /* We can not rely on the HPD pin always being correctly wired
> > * up, for example many KVM do not pass it through, and so
> > @@ -645,23 +653,27 @@ intel_crt_detect(struct drm_connector *connector, bool force)
> > */
> > if (intel_crt_detect_hotplug(connector)) {
> > DRM_DEBUG_KMS("CRT detected via hotplug\n");
> > - return connector_status_connected;
> > + goto out;
> > } else
> > DRM_DEBUG_KMS("CRT not detected via hotplug\n");
> > }
> >
> > if (intel_crt_detect_ddc(connector))
> > - return connector_status_connected;
> > + goto out;
> >
> > /* Load detection is broken on HPD capable machines. Whoever wants a
> > * broken monitor (without edid) to work behind a broken kvm (that fails
> > * to have the right resistors for HP detection) needs to fix this up.
> > * For now just bail out. */
> > - if (I915_HAS_HOTPLUG(dev))
> > - return connector_status_disconnected;
> > + if (I915_HAS_HOTPLUG(dev)) {
> > + status = connector_status_disconnected;
> > + goto out;
> > + }
> >
> > - if (!force)
> > - return connector->status;
> > + if (!force) {
> > + status = connector->status;
> > + goto out;
> > + }
> >
> > /* for pre-945g platforms use load detect */
> > if (intel_get_load_detect_pipe(connector, NULL, &tmp)) {
> > @@ -673,6 +685,9 @@ intel_crt_detect(struct drm_connector *connector, bool force)
> > } else
> > status = connector_status_unknown;
> >
> > +out:
> > + intel_display_power_put(dev_priv, power_domain);
> > +
> > return status;
> > }
> >
> > @@ -686,17 +701,28 @@ static int intel_crt_get_modes(struct drm_connector *connector)
> > {
> > struct drm_device *dev = connector->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > + struct intel_crt *crt = intel_attached_crt(connector);
> > + struct intel_encoder *intel_encoder = &crt->base;
> > + enum intel_display_power_domain power_domain;
> > int ret;
> > struct i2c_adapter *i2c;
> >
> > + power_domain = intel_display_port_power_domain(intel_encoder);
> > + intel_display_power_get(dev_priv, power_domain);
> > +
> > i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->vbt.crt_ddc_pin);
> > ret = intel_crt_ddc_get_modes(connector, i2c);
> > if (ret || !IS_G4X(dev))
> > - return ret;
> > + goto out;
> >
> > /* Try to probe digital port for output in DVI-I -> VGA mode. */
> > i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
> > - return intel_crt_ddc_get_modes(connector, i2c);
> > + ret = intel_crt_ddc_get_modes(connector, i2c);
> > +
> > +out:
> > + intel_display_power_put(dev_priv, power_domain);
> > +
> > + return ret;
> > }
> >
> > static int intel_crt_set_property(struct drm_connector *connector,
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index f53c95c..9c39425 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -3224,9 +3224,11 @@ intel_dp_detect(struct drm_connector *connector, bool force)
> > struct drm_device *dev = connector->dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > enum drm_connector_status status;
> > + enum intel_display_power_domain power_domain;
> > struct edid *edid = NULL;
> >
> > - intel_runtime_pm_get(dev_priv);
> > + power_domain = intel_display_port_power_domain(intel_encoder);
> > + intel_display_power_get(dev_priv, power_domain);
> >
> > DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> > connector->base.id, drm_get_connector_name(connector));
> > @@ -3256,23 +3258,31 @@ intel_dp_detect(struct drm_connector *connector, bool force)
> > if (intel_encoder->type != INTEL_OUTPUT_EDP)
> > intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
> > status = connector_status_connected;
> > -
> > out:
> > - intel_runtime_pm_put(dev_priv);
> > + intel_display_power_put(dev_priv, power_domain);
> > +
> > return status;
> > }
> >
> > static int intel_dp_get_modes(struct drm_connector *connector)
> > {
> > struct intel_dp *intel_dp = intel_attached_dp(connector);
> > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > + struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > struct intel_connector *intel_connector = to_intel_connector(connector);
> > struct drm_device *dev = connector->dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > + enum intel_display_power_domain power_domain;
> > int ret;
> >
> > /* We should parse the EDID data and find out if it has an audio sink
> > */
> >
> > + power_domain = intel_display_port_power_domain(intel_encoder);
> > + intel_display_power_get(dev_priv, power_domain);
> > +
> > ret = intel_dp_get_edid_modes(connector, &intel_dp->adapter);
> > + intel_display_power_put(dev_priv, power_domain);
> > if (ret)
> > return ret;
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> > index 3ee1db1..63b95bbd 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -488,8 +488,19 @@ static enum drm_connector_status
> > intel_dsi_detect(struct drm_connector *connector, bool force)
> > {
> > struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
> > + struct intel_encoder *intel_encoder = &intel_dsi->base;
> > + enum intel_display_power_domain power_domain;
> > + enum drm_connector_status connector_status;
> > + struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
> > +
> > DRM_DEBUG_KMS("\n");
> > - return intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
> > + power_domain = intel_display_port_power_domain(intel_encoder);
> > +
> > + intel_display_power_get(dev_priv, power_domain);
> > + connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
> > + intel_display_power_put(dev_priv, power_domain);
> > +
> > + return connector_status;
> > }
> >
> > static int intel_dsi_get_modes(struct drm_connector *connector)
> > --
> > 1.8.4
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20140219/67234012/attachment.sig>
More information about the Intel-gfx
mailing list