[Intel-gfx] [RFC PATCH 1/2] drm/i915: shuffle panel code

Jesse Barnes jbarnes at virtuousgeek.org
Tue May 20 21:00:27 CEST 2014


On Tue, 29 Apr 2014 23:30:48 +0300
Jani Nikula <jani.nikula at intel.com> wrote:

> Somehow a few functions have been dropped in the middle of backlight
> code. Move them around. No functional changes.
> 
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_panel.c | 150 ++++++++++++++++++-------------------
>  1 file changed, 75 insertions(+), 75 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 44ad415e3706..776249bab488 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -42,6 +42,59 @@ intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
>  	drm_mode_set_crtcinfo(adjusted_mode, 0);
>  }
>  
> +/**
> + * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
> + * @dev: drm device
> + * @fixed_mode : panel native mode
> + * @connector: LVDS/eDP connector
> + *
> + * Return downclock_avail
> + * Find the reduced downclock for LVDS/eDP in EDID.
> + */
> +struct drm_display_mode *
> +intel_find_panel_downclock(struct drm_device *dev,
> +			struct drm_display_mode *fixed_mode,
> +			struct drm_connector *connector)
> +{
> +	struct drm_display_mode *scan, *tmp_mode;
> +	int temp_downclock;
> +
> +	temp_downclock = fixed_mode->clock;
> +	tmp_mode = NULL;
> +
> +	list_for_each_entry(scan, &connector->probed_modes, head) {
> +		/*
> +		 * If one mode has the same resolution with the fixed_panel
> +		 * mode while they have the different refresh rate, it means
> +		 * that the reduced downclock is found. In such
> +		 * case we can set the different FPx0/1 to dynamically select
> +		 * between low and high frequency.
> +		 */
> +		if (scan->hdisplay == fixed_mode->hdisplay &&
> +		    scan->hsync_start == fixed_mode->hsync_start &&
> +		    scan->hsync_end == fixed_mode->hsync_end &&
> +		    scan->htotal == fixed_mode->htotal &&
> +		    scan->vdisplay == fixed_mode->vdisplay &&
> +		    scan->vsync_start == fixed_mode->vsync_start &&
> +		    scan->vsync_end == fixed_mode->vsync_end &&
> +		    scan->vtotal == fixed_mode->vtotal) {
> +			if (scan->clock < temp_downclock) {
> +				/*
> +				 * The downclock is already found. But we
> +				 * expect to find the lower downclock.
> +				 */
> +				temp_downclock = scan->clock;
> +				tmp_mode = scan;
> +			}
> +		}
> +	}
> +
> +	if (temp_downclock < fixed_mode->clock)
> +		return drm_mode_duplicate(dev, tmp_mode);
> +	else
> +		return NULL;
> +}
> +
>  /* adjusted_mode has been preset to be the panel's fixed mode */
>  void
>  intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
> @@ -323,6 +376,28 @@ out:
>  	pipe_config->gmch_pfit.lvds_border_bits = border;
>  }
>  
> +enum drm_connector_status
> +intel_panel_detect(struct drm_device *dev)
> +{
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +
> +	/* Assume that the BIOS does not lie through the OpRegion... */
> +	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
> +		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> +			connector_status_connected :
> +			connector_status_disconnected;
> +	}
> +
> +	switch (i915.panel_ignore_lid) {
> +	case -2:
> +		return connector_status_connected;
> +	case -1:
> +		return connector_status_disconnected;
> +	default:
> +		return connector_status_unknown;
> +	}
> +}
> +
>  static u32 intel_panel_compute_brightness(struct intel_connector *connector,
>  					  u32 val)
>  {
> @@ -795,28 +870,6 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
>  	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
>  }
>  
> -enum drm_connector_status
> -intel_panel_detect(struct drm_device *dev)
> -{
> -	struct drm_i915_private *dev_priv = dev->dev_private;
> -
> -	/* Assume that the BIOS does not lie through the OpRegion... */
> -	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
> -		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> -			connector_status_connected :
> -			connector_status_disconnected;
> -	}
> -
> -	switch (i915.panel_ignore_lid) {
> -	case -2:
> -		return connector_status_connected;
> -	case -1:
> -		return connector_status_disconnected;
> -	default:
> -		return connector_status_unknown;
> -	}
> -}
> -
>  #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
>  static int intel_backlight_device_update_status(struct backlight_device *bd)
>  {
> @@ -1103,59 +1156,6 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
>  	intel_backlight_device_unregister(intel_connector);
>  }
>  
> -/**
> - * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
> - * @dev: drm device
> - * @fixed_mode : panel native mode
> - * @connector: LVDS/eDP connector
> - *
> - * Return downclock_avail
> - * Find the reduced downclock for LVDS/eDP in EDID.
> - */
> -struct drm_display_mode *
> -intel_find_panel_downclock(struct drm_device *dev,
> -			struct drm_display_mode *fixed_mode,
> -			struct drm_connector *connector)
> -{
> -	struct drm_display_mode *scan, *tmp_mode;
> -	int temp_downclock;
> -
> -	temp_downclock = fixed_mode->clock;
> -	tmp_mode = NULL;
> -
> -	list_for_each_entry(scan, &connector->probed_modes, head) {
> -		/*
> -		 * If one mode has the same resolution with the fixed_panel
> -		 * mode while they have the different refresh rate, it means
> -		 * that the reduced downclock is found. In such
> -		 * case we can set the different FPx0/1 to dynamically select
> -		 * between low and high frequency.
> -		 */
> -		if (scan->hdisplay == fixed_mode->hdisplay &&
> -		    scan->hsync_start == fixed_mode->hsync_start &&
> -		    scan->hsync_end == fixed_mode->hsync_end &&
> -		    scan->htotal == fixed_mode->htotal &&
> -		    scan->vdisplay == fixed_mode->vdisplay &&
> -		    scan->vsync_start == fixed_mode->vsync_start &&
> -		    scan->vsync_end == fixed_mode->vsync_end &&
> -		    scan->vtotal == fixed_mode->vtotal) {
> -			if (scan->clock < temp_downclock) {
> -				/*
> -				 * The downclock is already found. But we
> -				 * expect to find the lower downclock.
> -				 */
> -				temp_downclock = scan->clock;
> -				tmp_mode = scan;
> -			}
> -		}
> -	}
> -
> -	if (temp_downclock < fixed_mode->clock)
> -		return drm_mode_duplicate(dev, tmp_mode);
> -	else
> -		return NULL;
> -}
> -
>  /* Set up chip specific backlight functions */
>  void intel_panel_init_backlight_funcs(struct drm_device *dev)
>  {

Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>

-- 
Jesse Barnes, Intel Open Source Technology Center



More information about the Intel-gfx mailing list