[Intel-gfx] [RFC PATCH 1/2] drm/i915: shuffle panel code

Daniel Vetter daniel at ffwll.ch
Tue May 20 21:08:12 CEST 2014


On Tue, May 20, 2014 at 12:00:27PM -0700, Jesse Barnes wrote:
> On Tue, 29 Apr 2014 23:30:48 +0300
> Jani Nikula <jani.nikula at intel.com> wrote:
> 
> > Somehow a few functions have been dropped in the middle of backlight
> > code. Move them around. No functional changes.
> > 
> > Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_panel.c | 150 ++++++++++++++++++-------------------
> >  1 file changed, 75 insertions(+), 75 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> > index 44ad415e3706..776249bab488 100644
> > --- a/drivers/gpu/drm/i915/intel_panel.c
> > +++ b/drivers/gpu/drm/i915/intel_panel.c
> > @@ -42,6 +42,59 @@ intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
> >  	drm_mode_set_crtcinfo(adjusted_mode, 0);
> >  }
> >  
> > +/**
> > + * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
> > + * @dev: drm device
> > + * @fixed_mode : panel native mode
> > + * @connector: LVDS/eDP connector
> > + *
> > + * Return downclock_avail
> > + * Find the reduced downclock for LVDS/eDP in EDID.
> > + */
> > +struct drm_display_mode *
> > +intel_find_panel_downclock(struct drm_device *dev,
> > +			struct drm_display_mode *fixed_mode,
> > +			struct drm_connector *connector)
> > +{
> > +	struct drm_display_mode *scan, *tmp_mode;
> > +	int temp_downclock;
> > +
> > +	temp_downclock = fixed_mode->clock;
> > +	tmp_mode = NULL;
> > +
> > +	list_for_each_entry(scan, &connector->probed_modes, head) {
> > +		/*
> > +		 * If one mode has the same resolution with the fixed_panel
> > +		 * mode while they have the different refresh rate, it means
> > +		 * that the reduced downclock is found. In such
> > +		 * case we can set the different FPx0/1 to dynamically select
> > +		 * between low and high frequency.
> > +		 */
> > +		if (scan->hdisplay == fixed_mode->hdisplay &&
> > +		    scan->hsync_start == fixed_mode->hsync_start &&
> > +		    scan->hsync_end == fixed_mode->hsync_end &&
> > +		    scan->htotal == fixed_mode->htotal &&
> > +		    scan->vdisplay == fixed_mode->vdisplay &&
> > +		    scan->vsync_start == fixed_mode->vsync_start &&
> > +		    scan->vsync_end == fixed_mode->vsync_end &&
> > +		    scan->vtotal == fixed_mode->vtotal) {
> > +			if (scan->clock < temp_downclock) {
> > +				/*
> > +				 * The downclock is already found. But we
> > +				 * expect to find the lower downclock.
> > +				 */
> > +				temp_downclock = scan->clock;
> > +				tmp_mode = scan;
> > +			}
> > +		}
> > +	}
> > +
> > +	if (temp_downclock < fixed_mode->clock)
> > +		return drm_mode_duplicate(dev, tmp_mode);
> > +	else
> > +		return NULL;
> > +}
> > +
> >  /* adjusted_mode has been preset to be the panel's fixed mode */
> >  void
> >  intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
> > @@ -323,6 +376,28 @@ out:
> >  	pipe_config->gmch_pfit.lvds_border_bits = border;
> >  }
> >  
> > +enum drm_connector_status
> > +intel_panel_detect(struct drm_device *dev)
> > +{
> > +	struct drm_i915_private *dev_priv = dev->dev_private;
> > +
> > +	/* Assume that the BIOS does not lie through the OpRegion... */
> > +	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
> > +		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> > +			connector_status_connected :
> > +			connector_status_disconnected;
> > +	}
> > +
> > +	switch (i915.panel_ignore_lid) {
> > +	case -2:
> > +		return connector_status_connected;
> > +	case -1:
> > +		return connector_status_disconnected;
> > +	default:
> > +		return connector_status_unknown;
> > +	}
> > +}
> > +
> >  static u32 intel_panel_compute_brightness(struct intel_connector *connector,
> >  					  u32 val)
> >  {
> > @@ -795,28 +870,6 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
> >  	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
> >  }
> >  
> > -enum drm_connector_status
> > -intel_panel_detect(struct drm_device *dev)
> > -{
> > -	struct drm_i915_private *dev_priv = dev->dev_private;
> > -
> > -	/* Assume that the BIOS does not lie through the OpRegion... */
> > -	if (!i915.panel_ignore_lid && dev_priv->opregion.lid_state) {
> > -		return ioread32(dev_priv->opregion.lid_state) & 0x1 ?
> > -			connector_status_connected :
> > -			connector_status_disconnected;
> > -	}
> > -
> > -	switch (i915.panel_ignore_lid) {
> > -	case -2:
> > -		return connector_status_connected;
> > -	case -1:
> > -		return connector_status_disconnected;
> > -	default:
> > -		return connector_status_unknown;
> > -	}
> > -}
> > -
> >  #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
> >  static int intel_backlight_device_update_status(struct backlight_device *bd)
> >  {
> > @@ -1103,59 +1156,6 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
> >  	intel_backlight_device_unregister(intel_connector);
> >  }
> >  
> > -/**
> > - * intel_find_panel_downclock - find the reduced downclock for LVDS in EDID
> > - * @dev: drm device
> > - * @fixed_mode : panel native mode
> > - * @connector: LVDS/eDP connector
> > - *
> > - * Return downclock_avail
> > - * Find the reduced downclock for LVDS/eDP in EDID.
> > - */
> > -struct drm_display_mode *
> > -intel_find_panel_downclock(struct drm_device *dev,
> > -			struct drm_display_mode *fixed_mode,
> > -			struct drm_connector *connector)
> > -{
> > -	struct drm_display_mode *scan, *tmp_mode;
> > -	int temp_downclock;
> > -
> > -	temp_downclock = fixed_mode->clock;
> > -	tmp_mode = NULL;
> > -
> > -	list_for_each_entry(scan, &connector->probed_modes, head) {
> > -		/*
> > -		 * If one mode has the same resolution with the fixed_panel
> > -		 * mode while they have the different refresh rate, it means
> > -		 * that the reduced downclock is found. In such
> > -		 * case we can set the different FPx0/1 to dynamically select
> > -		 * between low and high frequency.
> > -		 */
> > -		if (scan->hdisplay == fixed_mode->hdisplay &&
> > -		    scan->hsync_start == fixed_mode->hsync_start &&
> > -		    scan->hsync_end == fixed_mode->hsync_end &&
> > -		    scan->htotal == fixed_mode->htotal &&
> > -		    scan->vdisplay == fixed_mode->vdisplay &&
> > -		    scan->vsync_start == fixed_mode->vsync_start &&
> > -		    scan->vsync_end == fixed_mode->vsync_end &&
> > -		    scan->vtotal == fixed_mode->vtotal) {
> > -			if (scan->clock < temp_downclock) {
> > -				/*
> > -				 * The downclock is already found. But we
> > -				 * expect to find the lower downclock.
> > -				 */
> > -				temp_downclock = scan->clock;
> > -				tmp_mode = scan;
> > -			}
> > -		}
> > -	}
> > -
> > -	if (temp_downclock < fixed_mode->clock)
> > -		return drm_mode_duplicate(dev, tmp_mode);
> > -	else
> > -		return NULL;
> > -}
> > -
> >  /* Set up chip specific backlight functions */
> >  void intel_panel_init_backlight_funcs(struct drm_device *dev)
> >  {
> 
> Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>

Queued for -next, thanks for the patch.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch



More information about the Intel-gfx mailing list